64-66 Vent Window Rebuild - Need Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

65TRUK · 02-20-2013, 09:54 PM

I'm in the process of a 65 Short Box Step Side project and need to completely rebuild both door vent windows. I have the new seals and the rivet kit (LMC), but could sure use some coaching before I begin this effort. Does anyone have any recommendations regarding do's and don'ts or can anyone direct me to previous discussions that may contain this information. Thanks to all for your help.

Alan's Classic · 02-20-2013, 10:54 PM

Here's my write up. It's located in the FAQ's along with a lot of other great info. Here's a short cut.

02-20-2013, 09:54 PM	#1
65TRUK Registered User Join Date: Jul 2012 Location: Midland, MI Posts: 46	64-66 Vent Window Rebuild - Need Help I'm in the process of a 65 Short Box Step Side project and need to completely rebuild both door vent windows. I have the new seals and the rivet kit (LMC), but could sure use some coaching before I begin this effort. Does anyone have any recommendations regarding do's and don'ts or can anyone direct me to previous discussions that may contain this information. Thanks to all for your help.

02-20-2013, 10:54 PM	#2
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 64-66 Vent Window Rebuild - Need Help Here's my write up. It's located in the FAQ's along with a lot of other great info. Here's a short cut. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.