Static or bags "question of the day"

[jeh]

I am trying to decide if I want to go with something like ECE 4.5/6 drop or maybe RideTech level 1 bags. My truck is going to be a weekend cruiser during the summer months. I would like to run 20x8.5/ 20x10 coy c-5 wheels, as far as tire I like 265/50 front and 295/45 rear like member JWall has on his truck. Let me know what your opinions are ( do's and dont's) . I have always had jacked up 4x4's, and jeeps. This lowering thing is new to me... Thanks, Jason
Posted via Mobile Device

[big_al_71]

I have had both static and now my truck is bagged and I am beyond pleased..

* Perfect Ride

* Adjustable

* If you like lowered trucks you cant beat the stance of a vehicle being bagged


The best about being static dropped is just get in and drive. the ride is good but no where near as nice as a bag truck. Bagged truck you could run into air leaks compressor failure etc but with todays technology I am not concerned at all.

here are two picts with both set ups for comparison..

Good luck with your descision..

[jeh]

Originally Posted by big_al_71

I have had both static and now my truck is bagged and I am beyond pleased..

* Perfect Ride

* Adjustable

* If you like lowered trucks you cant beat the stance of a vehicle being bagged


The best about being static dropped is just get in and drive. the ride is good but no where near as nice as a bag truck. Bagged truck you could run into air leaks compressor failure etc but with todays technology I am not concerned at all.

here are two picts with both set ups for comparison..

Good luck with your descision..

You have an awesome truck!!! I just don't want to have 8 grand in air ride setup. I have went waaaaaay over my budget on the build already. That's why I was thinking the RideTech level 1 along with drop spindles in front and maybe a block in the rear with the bags. If I'm not on the right track someone chime in....
Posted via Mobile Device

[c10Dream'n]

you know jason i have been contemplating that same exact question. I thought i had my mind made up that i would do a 4/6 static drop and call it a day, but then big_al always has to throw his picture of sylvester in the mix and i think twice of saving up to get air ride thanks big_AL for keeping me on the fence a lil longer.

[oldschool18]

If your going to go with a bag set up save your money and do it right or you will not be happy with it.......well thats my 2 cents

[big_al_71]

Originally Posted by c10Dream'n

you know jason i have been contemplating that same exact question. I thought i had my mind made up that i would do a 4/6 static drop and call it a day, but then big_al always has to throw his picture of sylvester in the mix and i think twice of saving up to get air ride thanks big_AL for keeping me on the fence a lil longer.

My pleasure

do it right do it once!!!

Originally Posted by oldschool18

If your going to go with a bag set up save your money and do it right or you will not be happy with it.......well thats my 2 cents

Agreed!!!!

[joesgreen67]

Originally Posted by big_al_71

do it right do it once!!!

I've been on the fence myself to do the 4.5/6 static drop or bag it..

I LOVE sylvester's stance....been looking at you thread for specs/parts but havent found it yet! (68 pages!!)

[Leftlane]

What's wrong with going static now, and IF the funds present themselves bagging in the future?
You can keep the spindles, panhard, blocks and relocaters; so all you're really out is 2 sets of springs.
Is that not correct?
Posted via Mobile Device

[big_al_71]

Originally Posted by joesgreen67

I've been on the fence myself to do the 4.5/6 static drop or bag it..

I LOVE sylvester's stance....been looking at you thread for specs/parts but havent found it yet! (68 pages!!)

Thanks!!!!

[big_al_71]

Originally Posted by Leftlane

What's wrong with going static now, and IF the funds present themselves bagging in the future?
You can keep the spindles, panhard, blocks and relocaters; so all you're really out is 2 sets of springs.
Is that not correct?
Posted via Mobile Device

springs and shocks were the only parts I did not re use...

[~Whitey~]

Big_Al_71 your truck looks VERY awesome bagged with the new wheels.

Not sure a bagged truck would look all that great without 20's so better figure those and tires into your budget too if your going bagged. I'd love to someday but for me it'll be static to start.

[jeh]

I already plan on 20's whether I go static or bags. I'm just worried about a one shot deal with springs. Just say $800-$1000 , install the kit and think its to high or to low and then I have to purchase different spring and try to sell the others. That's my concern. There's not a lot of these trucks around here in WV , especially dropped so I'm kind of on my own. In other words I'm relying on you guys for help and info. Thanks, Jason
Posted via Mobile Device

[jeh]

I'm going to "bump" you guys for some more input......
Posted via Mobile Device

[C/10 King]

Here's more input....... I give you "Gumby"

[SBC]

I put new drop springs on my truck, drove about 100 miles before I took everything apart and put PB components and bags. Mainly for the better ride everyone talks about and I kept staring at the trucks posted above. I'm happy with my decision.

[Square_78]

Originally Posted by jeh

I would like to run 20x8.5/ 20x10 coy c-5 wheels, as far as tire I like 265/50 front and 295/45 rear....
Posted via Mobile Device

Holy cow those are some HUGE tires to run in the front. 30.5" diameter? Im running 27" tires on mine in front. Most people run a 255/35R20 in front and thats also 27", or a 255/40R20 thats 28".

[Malamute]

Originally Posted by C/10 King

Here's more input....... I give you "Gumby"

So much for that comment about a bagged truck not looking good if it doesn't have 20's!

[sundog]

Although Im new to c10's, I'm familiar with air ride,as my main summer car is on air.

I did all the work, everything is custom (no kits available), FBSS, and I'm maybe $1300 in.

There is no reason you can't put together a basic bag system for under $1500 for a truck that has the easiest conversion you could ever ask for

[jeh]

Originally Posted by Square_78

Holy cow those are some HUGE tires to run in the front. 30.5" diameter? Im running 27" tires on mine in front. Most people run a 255/35R20 in front and thats also 27", or a 255/40R20 thats 28".

About the huge tires in the front, look at JWall's album of his black truck. I think that baby looks badass with enough tire to fill the fender. I don't want to have the "rubber band' look on the rims. JMO
Posted via Mobile Device

[jeh]

Originally Posted by C/10 King

Here's more input....... I give you "Gumby"

Thanks man, When can I pick "Gumby" up??? Since you gave it to me. Ha,Ha
Posted via Mobile Device

[BB72CHEVKT]

I am running a static drop on my burb and I am very happy with the ride. It handles in corners really well. I also had the front end completely rebuilt and added an ECE sway bar.

[OC 72]

Originally Posted by big_al_71

I have had both static and now my truck is bagged and I am beyond pleased..

* Perfect Ride

* Adjustable

* If you like lowered trucks you cant beat the stance of a vehicle being bagged


The best about being static dropped is just get in and drive. the ride is good but no where near as nice as a bag truck. Bagged truck you could run into air leaks compressor failure etc but with todays technology I am not concerned at all.

here are two picts with both set ups for comparison..

Good luck with your descision..

I agree with Big Al...bag it! I have bags on my truck...first bag rod ever...and I love it!

[joesgreen67]

Would this be a worthwhile kit?

http://www.ebay.com/itm/170973083721...84.m1423.l2649

[jeh]

Originally Posted by joesgreen67

Would this be a worthwhile kit?

http://www.ebay.com/itm/170973083721...84.m1423.l2649

Thanks for the link, that's definitely what I'm looking for. I just want my truck to have a nice stance, I don't care if the rockers lay on the ground or not. Don't get me wrong i like it , but i don't need to be able to do it..
Posted via Mobile Device

[joesgreen67]

I'm not sure that the link I posted is similar to what others have run....Any "baggers" have advice on this kit? Good, bad???