need help, please see attatched - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dubie · 06-16-2003, 06:10 PM

I bought some replacement motor mounts but now need a pic of how these mount to the stands, CAn anyone help?
Here is a pic of the mount.

lngbed71 · 06-16-2003, 06:16 PM

The metal side of those mounts bolt to the motor, the large center hole is for the bolt from inside each cradle.

cableguy0 · 06-16-2003, 06:22 PM

also do yourself a favor and save a large headache bolt them to the motor before you put it in the truck and as lngbed said the metal side mounts to the block. the bolt goes from the back side of the cradle into the mount in that center hole

crazy4chevs · 06-16-2003, 06:28 PM

Another thing that could save you a headache. Make the hole in the towers larger, then use a larger washer for the bolt that goes from the towers to the mount. This really helps with alignment and installation.

dubie · 06-17-2003, 07:50 AM

thanks guys

06-16-2003, 06:10 PM	#1
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	need help, please see attatched I bought some replacement motor mounts but now need a pic of how these mount to the stands, CAn anyone help? Here is a pic of the mount. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

06-16-2003, 06:16 PM	#2
lngbed71 Nothing fits but the oil Join Date: Mar 2003 Location: Gaston, Indiana Posts: 424	The metal side of those mounts bolt to the motor, the large center hole is for the bolt from inside each cradle. __________________ Land of the free Because of the brave

06-16-2003, 06:22 PM	#3
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	also do yourself a favor and save a large headache bolt them to the motor before you put it in the truck and as lngbed said the metal side mounts to the block. the bolt goes from the back side of the cradle into the mount in that center hole __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

06-16-2003, 06:28 PM	#4
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	Another thing that could save you a headache. Make the hole in the towers larger, then use a larger washer for the bolt that goes from the towers to the mount. This really helps with alignment and installation. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

06-17-2003, 07:50 AM	#5
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	thanks guys __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.