Video for ring and pinion install ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KEL · 03-07-2013, 03:23 PM

Does anyone know of an online video for a ring and pinion install?
I have read alot, and I really do mean "alot". but there are a few
things I would like to actually see someone else do.
Thanks

**med.bronze** · 03-07-2013, 03:55 PM

I actually searched this last weekend and the best one I found was project "old school" from the "Trucks" show on powerblocktv.com. I'm still looking however for more..
Posted via Mobile Device

KEL · 03-08-2013, 07:32 AM

I cant find that one nor the one from extreme 4 x 4.
guess I'll have to look again

**med.bronze** · 03-08-2013, 10:11 AM

Try this: http://www.powerblocktv.com/episodes...-truck-how-tos
Posted via Mobile Device

KEL · 03-08-2013, 11:03 AM

Hey
I actually remember seeing that one !
They really didn't measure or set up anything on that episode.
It was just "out with the old. in with the new"
I am pretty sue there was an episode of EXTREME 4X4
where he went through all the setup, I just can't find it.

**med.bronze** · 03-08-2013, 11:55 AM

If you find the extreme 4x4 episode would you mind posting the link? I'd really like to see it because I thought the same thing about the Trucks episode as you did
Posted via Mobile Device

KEL · 03-08-2013, 12:48 PM

Sure will.
I'll keep looking.
Maybe someone else will jump in.

KEL · 03-08-2013, 02:46 PM

If you understand the basics, this video is pretty good.

How to install or change or replace gears and...

Still looking for others, though.

**med.bronze** · 03-10-2013, 11:36 AM

Was this the extreme 4x4 episode you were thinking of?http://www.powerblocktv.com/episodes...-scout-part-ii
Posted via Mobile Device

KEL · 03-11-2013, 07:48 AM

That might be it. Between what I have read, and that vid,
I think I will take on that project this spring. No heat in
the garage yet.
Thanks.

**med.bronze** · 03-11-2013, 07:24 PM

Well keep me posted of your progress and all the details as I am going to be tackling this as well in the near future. I've been collecting the special tools for this for over a year now and I'm anxious to use them.
Posted via Mobile Device

BrutonLS1 · 03-12-2013, 03:46 AM

Stacey David's on Gearz did a locker install video I believe? Might help a little.
I'm curious to learn more as well.
Posted via Mobile Device

**med.bronze** · 03-12-2013, 09:18 AM

I forgot about Stacey, I'll have to try and find that one
Posted via Mobile Device

KEL · 03-12-2013, 10:52 AM

I found two on Stacey David's web site.
There was no content. Quick start to finish
video that takes under three miinutes.

eightbanger · 03-12-2013, 12:16 PM

Here's a link I saved back when I thought I might attempt a rear end rebuild.

http://www.hotrod.com/techarticles/d...install_guide/

KEL · 03-12-2013, 12:37 PM

Lots of good info there.
Cheers, Nigel

elkniks · 04-06-2015, 08:21 PM

Check out Carl Jantz on youtube. I have also been doing setup research and he has one video that makes pattern reading very easy to understand. WeberAuto on youtube also has some very by the book setup guides.

03-07-2013, 03:23 PM	#1
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Video for ring and pinion install ? Does anyone know of an online video for a ring and pinion install? I have read alot, and I really do mean "alot". but there are a few things I would like to actually see someone else do. Thanks

03-07-2013, 03:55 PM	#2
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Video for ring and pinion install ? I actually searched this last weekend and the best one I found was project "old school" from the "Trucks" show on powerblocktv.com. I'm still looking however for more.. Posted via Mobile Device __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-08-2013, 07:32 AM	#3
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Video for ring and pinion install ? I cant find that one nor the one from extreme 4 x 4. guess I'll have to look again

03-08-2013, 10:11 AM	#4
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Video for ring and pinion install ? Try this: http://www.powerblocktv.com/episodes...-truck-how-tos Posted via Mobile Device __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-08-2013, 11:03 AM	#5
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Re: Video for ring and pinion install ? Hey I actually remember seeing that one ! They really didn't measure or set up anything on that episode. It was just "out with the old. in with the new" I am pretty sue there was an episode of EXTREME 4X4 where he went through all the setup, I just can't find it.

03-08-2013, 11:55 AM	#6
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Video for ring and pinion install ? If you find the extreme 4x4 episode would you mind posting the link? I'd really like to see it because I thought the same thing about the Trucks episode as you did Posted via Mobile Device __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-08-2013, 12:48 PM	#7
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Re: Video for ring and pinion install ? Sure will. I'll keep looking. Maybe someone else will jump in.

03-10-2013, 11:36 AM	#9
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Video for ring and pinion install ? Was this the extreme 4x4 episode you were thinking of?http://www.powerblocktv.com/episodes...-scout-part-ii Posted via Mobile Device __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-11-2013, 07:48 AM	#10
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Re: Video for ring and pinion install ? That might be it. Between what I have read, and that vid, I think I will take on that project this spring. No heat in the garage yet. Thanks.

03-11-2013, 07:24 PM	#11
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Video for ring and pinion install ? Well keep me posted of your progress and all the details as I am going to be tackling this as well in the near future. I've been collecting the special tools for this for over a year now and I'm anxious to use them. Posted via Mobile Device __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-12-2013, 03:46 AM	#12
BrutonLS1 Registered User Join Date: Oct 2012 Location: Weatherford, Tx Posts: 142	Re: Video for ring and pinion install ? Stacey David's on Gearz did a locker install video I believe? Might help a little. I'm curious to learn more as well. Posted via Mobile Device __________________ -Bruton 1968 GMC long bed 5.7/700R4 --I'd rather push a Chevy, than drive a Ford.--

03-12-2013, 09:18 AM	#13
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Video for ring and pinion install ? I forgot about Stacey, I'll have to try and find that one Posted via Mobile Device __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

03-12-2013, 10:52 AM	#14
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Re: Video for ring and pinion install ? I found two on Stacey David's web site. There was no content. Quick start to finish video that takes under three miinutes.

03-12-2013, 12:16 PM	#15
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Video for ring and pinion install ? Here's a link I saved back when I thought I might attempt a rear end rebuild. http://www.hotrod.com/techarticles/d...install_guide/ __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

03-12-2013, 12:37 PM	#16
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Re: Video for ring and pinion install ? Lots of good info there. Cheers, Nigel



Register or Log In To remove these advertisements.

04-06-2015, 08:21 PM	#17
elkniks Registered User Join Date: Mar 2015 Location: Seaside,CA Posts: 142	Re: Video for ring and pinion install ? Check out Carl Jantz on youtube. I have also been doing setup research and he has one video that makes pattern reading very easy to understand. WeberAuto on youtube also has some very by the book setup guides.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.