Full Tilt hub to hub Mustang II - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmsaunders · 03-11-2013, 01:29 AM

Currently looking for a M2 kit and I found this one http://www.fulltiltstreetrods.com/hub_to_hub.htm . Do any of the members have any experience with this company or kit?

**mr48chev** · 03-11-2013, 12:33 PM

The price doesn't look bad for the basic one but you might want to price out the options you would want and add up the total cost to see how it compares with other similar offerings.

I've seen their adds for years but don't know anyone running one of their crossmembers.

Kabwe · 03-11-2013, 02:07 PM

I've installed one and it looked like any other standard mustang 2 kit in my opinion. The metal is 3/16 thick that is same metal thickness as most aftermarket mustang 2 kits. I installed the one with tubular upper and lower a arms.

This one

I also recently installed this one for a friend and its about the same level as the fulltilt unit. See if it give you a better price.
http://www.jwrodgarage.com/suspension.html

Here is a pic of the one I installed on a 1945 truck. The kit for this truck was a little different (being it is a 1945) as far as installations but the components were just as nice as any other Mustang 2 that I've installed.

03-11-2013, 01:29 AM	#1
jmsaunders Registered User Join Date: Nov 2011 Location: Lebanon, TN Posts: 311	Full Tilt hub to hub Mustang II Currently looking for a M2 kit and I found this one http://www.fulltiltstreetrods.com/hub_to_hub.htm . Do any of the members have any experience with this company or kit? __________________ J'aimi 54 Chevy 3100 5.3/4L60E (Plan to make summer daily driver) 54 Chevy 3600 "Destiny" future project (Plan to build for my daughter) 72 C10 current daily driver 74 Nova Son's DD (His 1st car, we had to start him off right) 00 F*rd Expedition wife's DD (She's the trader in the house and doesn't drive a GM )

03-11-2013, 12:33 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,719	Re: Full Tilt hub to hub Mustang II The price doesn't look bad for the basic one but you might want to price out the options you would want and add up the total cost to see how it compares with other similar offerings. I've seen their adds for years but don't know anyone running one of their crossmembers. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-11-2013, 02:07 PM	#3
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: Full Tilt hub to hub Mustang II I've installed one and it looked like any other standard mustang 2 kit in my opinion. The metal is 3/16 thick that is same metal thickness as most aftermarket mustang 2 kits. I installed the one with tubular upper and lower a arms. This one I also recently installed this one for a friend and its about the same level as the fulltilt unit. See if it give you a better price. http://www.jwrodgarage.com/suspension.html Here is a pic of the one I installed on a 1945 truck. The kit for this truck was a little different (being it is a 1945) as far as installations but the components were just as nice as any other Mustang 2 that I've installed. Last edited by Kabwe; 03-11-2013 at 08:37 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.