AR WTB 2 GMC inline 6 , valve covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 04-02-2013, 04:34 PM

I would like to buy 2 nice GMC inline 6 cylinder valve covers with the GMC stamped on the top of them

longbed67 · 04-14-2013, 11:58 AM

Which motor size?

**67cheby** · 04-14-2013, 01:34 PM

I am using them for a custom application so it doesn't matter as long as they match
Posted via Mobile Device

eagleuh1 · 04-19-2013, 12:52 PM

Sounds like some custom coil covers in the making.

**67cheby** · 04-19-2013, 01:13 PM

Quote:

Originally Posted by eagleuh1

Sounds like some custom coil covers in the making.

it would be...if I could find some covers ! LOL

**67cheby** · 04-26-2013, 10:34 AM

anyone have anything ?

**paulspickupparts** · 04-26-2013, 03:43 PM

I should have a pair . Problem is I usually sell them to the guys really building an inline an get $45 each. Thanks

**67cheby** · 04-26-2013, 03:48 PM

If you could shoot me a couple pics , I am interested, I am going to make some LS coil covers for project Square Peg

**paulspickupparts** · 04-26-2013, 03:50 PM

Sure , will get some this evening. Thanks

**paulspickupparts** · 04-26-2013, 09:27 PM

I went out and looked at my trucks . I have two cover but a slight problem . One is from the larger trucks so has an opening near the GMC emboss for the crankcase ventilation. The other is on a pickup. I do not have it off yet but looks good. Let me know if the extra hole will be a problem for you. Thanks Paul

**67cheby** · 04-26-2013, 10:24 PM

I don't think I could use the one with the hole but the other one should work, I don't want to weld that close to the lettering and chance warping it there
Posted via Mobile Device

**paulspickupparts** · 04-26-2013, 10:30 PM

I understand . I will pull the one from the pickup and make sure it is good. Should be able to get it tommorrow. Thanks

**paulspickupparts** · 04-29-2013, 02:24 PM

Here are some pics of the one I have. I checked the others and they all have holes for the crankcase vent. If you give me you zip I can give you a shipping quote. Thanks Paul

**67cheby** · 04-29-2013, 03:27 PM

the other one I bought just has the gmc logo, no circle around it ? do you have one of those ?

**paulspickupparts** · 04-29-2013, 04:47 PM

There could be several styles. Can you send a pic?

**67cheby** · 05-06-2013, 10:22 AM

Here is what I am looking for if anyone has one, and here is what I am going to do with it, make it match this one !

**paulspickupparts** · 05-06-2013, 10:31 AM

That one has the crankcase breather hole that I referred to. Are you ok with that?

**67cheby** · 05-06-2013, 10:35 AM

I guess I am , it is closer then I wanted but I think it will work !

**67cheby** · 05-31-2013, 01:41 PM

still needing a matching cover, anyone have one ?

MotherTrucker · 06-08-2013, 03:44 PM

Gotcha covered.
PM us for more info.

**67cheby** · 06-08-2013, 11:22 PM

Awesome ,will do !
Posted via Mobile Device

**67cheby** · 07-04-2013, 07:57 AM

Still looking , anyone ?
Posted via Mobile Device

**paulspickupparts** · 07-04-2013, 08:47 AM

Did Mother Truck get you fixed up?

**67cheby** · 07-05-2013, 09:13 AM

Quote:

Originally Posted by paulspickupparts

Did Mother Truck get you fixed up?

No sir , he sold them before I seen he had responded, still looking !

04-02-2013, 04:34 PM	#1
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	WTB 2 GMC inline 6 , valve covers I would like to buy 2 nice GMC inline 6 cylinder valve covers with the GMC stamped on the top of them __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-14-2013, 11:58 AM	#2
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB 2 GMC inline 6 , valve covers Which motor size? __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

04-14-2013, 01:34 PM	#3
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers I am using them for a custom application so it doesn't matter as long as they match Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-19-2013, 12:52 PM	#4
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: WTB 2 GMC inline 6 , valve covers Sounds like some custom coil covers in the making.

04-26-2013, 10:34 AM	#6
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers anyone have anything ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-26-2013, 03:43 PM	#7
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 2 GMC inline 6 , valve covers I should have a pair . Problem is I usually sell them to the guys really building an inline an get $45 each. Thanks

04-26-2013, 03:48 PM	#8
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers If you could shoot me a couple pics , I am interested, I am going to make some LS coil covers for project Square Peg __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-26-2013, 03:50 PM	#9
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 2 GMC inline 6 , valve covers Sure , will get some this evening. Thanks

04-26-2013, 09:27 PM	#10
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 2 GMC inline 6 , valve covers I went out and looked at my trucks . I have two cover but a slight problem . One is from the larger trucks so has an opening near the GMC emboss for the crankcase ventilation. The other is on a pickup. I do not have it off yet but looks good. Let me know if the extra hole will be a problem for you. Thanks Paul

04-26-2013, 10:24 PM	#11
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers I don't think I could use the one with the hole but the other one should work, I don't want to weld that close to the lettering and chance warping it there Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-26-2013, 10:30 PM	#12
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 2 GMC inline 6 , valve covers I understand . I will pull the one from the pickup and make sure it is good. Should be able to get it tommorrow. Thanks

04-29-2013, 02:24 PM	#13
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 2 GMC inline 6 , valve covers Here are some pics of the one I have. I checked the others and they all have holes for the crankcase vent. If you give me you zip I can give you a shipping quote. Thanks Paul Attached Images

04-29-2013, 03:27 PM	#14
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers the other one I bought just has the gmc logo, no circle around it ? do you have one of those ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-29-2013, 04:47 PM	#15
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 2 GMC inline 6 , valve covers There could be several styles. Can you send a pic?

05-06-2013, 10:22 AM	#16
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers Here is what I am looking for if anyone has one, and here is what I am going to do with it, make it match this one ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

05-06-2013, 10:31 AM	#17
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 2 GMC inline 6 , valve covers That one has the crankcase breather hole that I referred to. Are you ok with that?

05-06-2013, 10:35 AM	#18
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers I guess I am , it is closer then I wanted but I think it will work ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-31-2013, 01:41 PM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers still needing a matching cover, anyone have one ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-08-2013, 03:44 PM	#20
MotherTrucker Registered User Join Date: Sep 2005 Location: Southwestern Desert Posts: 26	Re: WTB 2 GMC inline 6 , valve covers Gotcha covered. PM us for more info. Attached Images

06-08-2013, 11:22 PM	#21
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers Awesome ,will do ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-04-2013, 07:57 AM	#22
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 2 GMC inline 6 , valve covers Still looking , anyone ? Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-04-2013, 08:47 AM	#23
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: WTB 2 GMC inline 6 , valve covers Did Mother Truck get you fixed up?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.