Hood Springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Richard Dobson · 06-23-2003, 07:53 AM

What is the secret to putting hood springs on the hinges?

JimKshortstep4x4 · 06-23-2003, 08:59 AM

This is the way I do it. The hinge is opened up and layed on a piece of carpet. I position it so that if the spring comes off during installation, I won't be in the way of it. I place one foot on the hinge, hook one end of the spring to the lower end and using my Snapon brake spring tool, I leverage the spring onto the other end. The tool has a little hook on it that keeps the tool in place as you leverage the spring on. This works very well and it is quick.

There are other ways of doing it but for me this has worked for a long time.

Jim

06-23-2003, 07:53 AM	#1
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	Hood Springs What is the secret to putting hood springs on the hinges? __________________ Richard Dobson

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-23-2003, 08:59 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	This is the way I do it. The hinge is opened up and layed on a piece of carpet. I position it so that if the spring comes off during installation, I won't be in the way of it. I place one foot on the hinge, hook one end of the spring to the lower end and using my Snapon brake spring tool, I leverage the spring onto the other end. The tool has a little hook on it that keeps the tool in place as you leverage the spring on. This works very well and it is quick. There are other ways of doing it but for me this has worked for a long time. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.