SC 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches

[wancosc356]

I've got a 71 non ac cab with clean title and a 67 frame that I haven't had any luck selling. I hate to cut them up but I need to move them. So....let me know what you need cut and the zip code to where the parts will be going. Prices starting at $20 for patches of the cab or pieces of the frame.

OR Take the cab whole for $500 and the frame whole for SOLD....

I'll give this a week or two, then its all going to the scrap yard....

Pictures of the frame and cab can be found here.....pages 3-7

http://s630.photobucket.com/user/wan...?sort=3&page=3

[wancosc356]

Bump

[88fordf150]

How about under the dash cowl on the passenger side.

[wancosc356]

I'll check it out tomorrow and get back to you.

[bodydropped72]

is the frame a lwb or swb? im interested in the whole frame. is it straight with no bends or anything!? text if easier. 757-358-4542

[wancosc356]

Originally Posted by bodydropped72

is the frame a lwb or swb? im interested in the whole frame. is it straight with no bends or anything!? text if easier. 757-358-4542

SWB. It is straight with only the very front piece twisted. I have a straight replacement piece to go with it though. It looks like it got twisted when someone used a tow hook and yanked it. Check out the pictures. Its the U or V shaped piece right in front of the front cross member.

[cleanfreak]

Where are you in sc? Interested in the frame , do you have any trailing arms?

[wancosc356]

Originally Posted by cleanfreak

Where are you in sc? Interested in the frame , do you have any trailing arms?

Florence, SC. I don't have any trailing arms or rear axles. Sorry.

[88fordf150]

Originally Posted by 88fordf150

How about under the dash cowl on the passenger side.

Did you get a chance to look under the dash at the inner cowl? Thanks

[amashal]

If you start cutting the frame I could use both sides directly over the rear end 1' in both directions. previous owner did a homemade step notch and hacking the frame. Shipped to 75002.
Posted via Mobile Device

[69SCSS]

I need the driver's side core support bracket if you're still parting the frame. It's the one I circled. Mine's pretty twisted up.

[cleanfreak]

Originally Posted by wancosc356

Florence, SC. I don't have any trailing arms or rear axles. Sorry.

Thanks - about 3 hours the wrong way from where I've got a pick up - thanks

[wancosc356]

Originally Posted by 88fordf150

Did you get a chance to look under the dash at the inner cowl? Thanks

The inner cowl looks very clean in that area. Shoot me a PM and let me know exactly what you need.

Originally Posted by amashal

If you start cutting the frame I could use both sides directly over the rear end 1' in both directions. previous owner did a homemade step notch and hacking the frame. Shipped to 75002.
Posted via Mobile Device

I'll let you know.

Originally Posted by 69SCSS

I need the driver's side core support bracket if you're still parting the frame. It's the one I circled. Mine's pretty twisted up.

What year is your truck?

Originally Posted by cleanfreak

Thanks - about 3 hours the wrong way from where I've got a pick up - thanks

Shoot me a PM. Depending on where you have a pickup, I might be able to help you out.

[69SCSS]

My frame is a '69, but the core support mount is the same 67-72. Let me know what you want for it.

Thanks
Al

[wancosc356]

Originally Posted by 69SCSS

My frame is a '69, but the core support mount is the same 67-72. Let me know what you want for it.

Thanks
Al

The core support mounts are different from 67-68 and 69-72. I may have a 69-72 support mount though. Let me check and ill get back to u.
Posted via Mobile Device

[69SCSS]

Originally Posted by wancosc356

The core support mounts are different from 67-68 and 69-72. I may have a 69-72 support mount though. Let me check and ill get back to u.
Posted via Mobile Device

As far as I know, the mount itself is different, not the frame. I'm using a '68 front clip anyway, so the '67 will fit perfectly.

[Matts Kustoms]

If you decide to cut the frame I would be interested in both front frame rails from suspension forward. Let me know.
Posted via Mobile Device

[wancosc356]

Originally Posted by 69SCSS

As far as I know, the mount itself is different, not the frame. I'm using a '68 front clip anyway, so the '67 will fit perfectly.

The mount is different on the frame. The hole is a different size on the 67-68 and the 69-72.

But if you are gonna use a 68 front clip with a 68 core support, these will work for you.

Originally Posted by Matts Kustoms

If you decide to cut the frame I would be interested in both front frame rails from suspension forward. Let me know.
Posted via Mobile Device

Ok. Sounds good. Will let you know. Waiting to hear back on someone interested in the whole frame.

[69SCSS]

Originally Posted by wancosc356

The mount is different on the frame. The hole is a different size on the 67-68 and the 69-72.

But if you are gonna use a 68 front clip with a 68 core support, these will work for you.



Ok. Sounds good. Will let you know. Waiting to hear back on someone interested in the whole frame.

Cool let me know if you're going to part the frame and what you want for it.

Thanks,
Al

[wancosc356]

Frame sold to bodydropped72 pending pickup and payment.


Al,
I may have another set of mounts....do you want one or both?

[69SCSS]

Originally Posted by wancosc356

Frame sold to bodydropped72 pending pickup and payment.


Al,
I may have another set of mounts....do you want one or both?

I just need the driver's side. My passenger side one is straight. Thanks!

[Gumby'sC20]

Any chance you might be able to chop a bedside up? I need the tail light section from the left bedside. Approx 2-3in above and below the tail light assembly and about 3-4 inches down the side of the bed. I know this completely ruins the rest of the bedside, but if you don't have any takers for the whole bedside, and are planning on scrapping it anyways, it might work out. Let me know! Thanks!

[69SCSS]

Just checking in, you happen to have that bracket? Going to be having my frame blasted soon and need to get that on there.

Thanks! Al

[wancosc356]

Originally Posted by Gumby'sC20

Any chance you might be able to chop a bedside up? I need the tail light section from the left bedside. Approx 2-3in above and below the tail light assembly and about 3-4 inches down the side of the bed. I know this completely ruins the rest of the bedside, but if you don't have any takers for the whole bedside, and are planning on scrapping it anyways, it might work out. Let me know! Thanks!

Im not scraping the bed or cutting up the bedsides....I will sell you the whole bed and you can cut it up.

Originally Posted by 69SCSS

Just checking in, you happen to have that bracket? Going to be having my frame blasted soon and need to get that on there.

Thanks! Al

Sorry for the delay. The frame is gone but I do have a set of brackets. I'll get back to you tomorrow.

[69SCSS]

Never heard back, let me know if you have the brackets.

Thanks, Al