Body mount question poly squeaks! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mikewarme · 05-11-2013, 02:10 PM

I have my 69 gmc 3/4 ton w 396 custom camper. I put new poly mounts and they squeak like a gardners trucks! Should I replace again with rubber or???

Rufton · 05-11-2013, 02:32 PM

Some people grease poly bushings to stop squeaks. I used anti-seize but I didn't do any research.

GASoline71 · 05-11-2013, 02:50 PM

That's the main reason I don't use poly body mounts.

Gary

Prematuregrey · 05-11-2013, 03:12 PM

http://aqualubeky.com/grease/

I used this when I did the Poly suspension on my 4Runner almost a decade ago, still no squeaks and it's my offroad toy. This is what we use in the ROV industry as well, works great. I'd just pull the mounts off and apply liberally then reassembly and forget about them.

http://www.marinesan.com/Aqua_Shield_Grease_s/239.htm is also a comparable product. News to me about this replacing Aqualube but makes since now that I think about the last order I placed at work.

jorgensensc · 05-11-2013, 03:36 PM

Some people go around and drill a hole in the side of the bushing then add a zerk fitting.
Posted via Mobile Device

Fldawg · 05-11-2013, 04:12 PM

one thing to remember the rubber mounts worked many years with no noise. why change a good thing

05-11-2013, 02:10 PM	#1
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Body mount question poly squeaks! I have my 69 gmc 3/4 ton w 396 custom camper. I put new poly mounts and they squeak like a gardners trucks! Should I replace again with rubber or???

05-11-2013, 02:32 PM	#2
Rufton Registered User Join Date: Apr 2013 Location: Knoxville TN Posts: 1,170	Re: Body mount question poly squeaks! Some people grease poly bushings to stop squeaks. I used anti-seize but I didn't do any research.

05-11-2013, 03:12 PM	#4
Prematuregrey Registered User Join Date: Apr 2013 Location: Austin Texas Posts: 111	Re: Body mount question poly squeaks! http://aqualubeky.com/grease/ I used this when I did the Poly suspension on my 4Runner almost a decade ago, still no squeaks and it's my offroad toy. This is what we use in the ROV industry as well, works great. I'd just pull the mounts off and apply liberally then reassembly and forget about them. http://www.marinesan.com/Aqua_Shield_Grease_s/239.htm is also a comparable product. News to me about this replacing Aqualube but makes since now that I think about the last order I placed at work. __________________ Owner: Times Are Tough Toys 92 4 Runner (Joyce, long story from my time in Africa) Lotsa stuff, just about finished dumping money into it. 89 Mercedes 560 SEL, Merdle. Wrecked 71 Chevy K20, Clifford, BB and 1 Tons

05-11-2013, 03:36 PM	#5
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Body mount question poly squeaks! Some people go around and drill a hole in the side of the bushing then add a zerk fitting. Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

05-11-2013, 04:12 PM	#6
Fldawg Registered User Join Date: Jan 2011 Location: Lynn Haven Florida Posts: 1,019	Re: Body mount question poly squeaks! one thing to remember the rubber mounts worked many years with no noise. why change a good thing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.