![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2010
Location: DANA POINT CA
Posts: 256
|
Oil pan for LS2 ????
What oil pan are you guys using for the ls 2 swap I have heard truck rear sump deep pans or camaro ???
__________________
ScoobyDoobyDoo |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: May 2013
Location: WEST PALM FLORIDA
Posts: 1,174
|
Re: Oil pan for LS2 ????
If you are not real low the stock truck pan sticks only an 1 1/2 below the crosmember , a muslecar pan is about even with it , cost around 170 on ebay shiped , im in the process of an ly6 , turbo 350 swap right now
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
|
Re: Oil pan for LS2 ????
I used an f-body(Camaro/Trans Am) pan. It sits about 3/4" above the crossmember and tucks nicely into the stock crossmember. A Caddy CTS-V pan also works good. The truck pans hang below the crossmember by about 1 1/4" which could catch and hit on dips and uneven surfaces, especially if lowered.
__________________
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2008
Location: Calgary, ab
Posts: 325
|
Re: Oil pan for LS2 ????
I used the cts v oil pan, works like a charm.
Posted via Mobile Device
__________________
1968 C10 LS2/4L70e swb fleet side. ECE front disk conversion and 3.5/5 drop. SOLD. 1968 C20 Custom Camper 396 50th survivor! SOLD to northerngmc |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2010
Location: DANA POINT CA
Posts: 256
|
Re: Oil pan for LS2 ????
Do you have the current part number for the ctsv oil pan ??
__________________
ScoobyDoobyDoo |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: May 2013
Location: WEST PALM FLORIDA
Posts: 1,174
|
Re: Oil pan for LS2 ????
that number is in this link you should check the whole sight
http://ls1tech.com/forums/conversion...-oil-pans.html |
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Dec 2008
Location: San Jose
Posts: 206
|
Re: Oil pan for LS2 ????
CTS-V pan. Perfect fit and it's above the crossmember.
![]() ![]() _______________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556610 1970 c10 LSX (550hp) frame off |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|