CA Odds and ends

[Fesser]

Cleaning out a storage area and finding things I don't need...


Everything is plus shipping unless noted.


(6) door hinges, probably from a 68, could use pins, some bolts, 12.00 Sold.

Non AC radio repair panel with ash tray included, 24.00 Sold.

68 Glove box door and ash tray, 18.00 New price 10.00 plus shipping.


Gas filler neck, had noted as 72 auxillary tank, but I am not certain, New price15.00 plus shipping

68 C10 under dash harness with some switches attached, don't see any cuts but there is a wire that is broken (a white one next to an orange one). Fuse block has typical rust on fuse wings. Non Gauge harness (I believe).46.00 New price, 46.00 shipped Newer price 40.shipped
68 floor shift steering column. Can have the wheel too but it is cracked in many places. 35.00 Sold.

68 (or 67?) horn caps. One pretty good chrome one, one that someone painted with latex, seems to be more of a flat finish. The chrome one has the inner rubber ring the other does not. Both, 23.00 Sale pending. Sold.

Steering gear, manual, I think it came out of a 68 C10 but its been here for awhile so I am not positive. 15.00 New price, 10.00 plus shipping. Newer price 8.00 plus shipping
72 AC bracket (just the one piece) 1.95 New price, Free, plus shipping

[junkyard]

I'm in for the 68 horn buttons pending pictures.
Thanks

[Undone]

I'll take the hinges.

[Scott>72-GMC]

Gas filler neck, had noted as 72 auxillary tank, but I am not certain, 20.00


Do you have pics of this?
Posted via Mobile Device

[Fesser]

Gents, my home internet died yesterday as I was posting pictures. They are supposed to fix it today but I can't verify that until I get off work this evening. Pictures will be posted as soon as I can.

Undone, I will let you know the shipping this evening also, unless you just want me to put them in a medium sized flat rate box.

Frank

[Fesser]

Net should be up now...pictures to follow.

[Fesser]

glove box door with ashtray; and wiring harness.

[Fesser]

Steering column, steering gear, ac bracket

[plumber36757]

Ill take filler neck. Pending total Shipped to 76179
Posted via Mobile Device

[junkyard]

Pass on the horn buttons. I already bought one.
Thanks

[Fesser]

Originally Posted by Undone

I'll take the hinges.

How does 20 even sound? Priority mail.

[Fesser]

Originally Posted by plumber36757

Ill take filler neck. Pending total Shipped to 76179
Posted via Mobile Device

I can send it priority mail for 30 total. Possibly less if I weigh it and ship it UPS ground.

[wesmigletz]

Will you take $23 for the horn buttons shipped to 91506. No need for priority

[Fesser]

Originally Posted by wesmigletz

Will you take $23 for the horn buttons shipped to 91506. No need for priority

Considering where you are (or were) and what you do for our country I'd be happy to send them to you for free. Just PM me an address.

Frank

[VA72C10]

Originally Posted by Fesser

Considering where you are (or were) and what you do for our country I'd be happy to send them to you for free. Just PM me an address.

Frank

Nice gesture!

How much for the column itself shipped or the column and wheel to 23112?

factory floor shift (no arm for shifter correct?)

[VA72C10]

Also patch panel shipped to 23112 if shipped with the wheel? Thanks...have someone local that's been looking for a patch and trying to help them out.

[Hammerforhire]

I'll be second in line for the column. No wheel. Pending shipping cost. Calif. 93905
Thank you,
Posted via Mobile Device

[wesmigletz]

Originally Posted by Fesser

Considering where you are (or were) and what you do for our country I'd be happy to send them to you for free. Just PM me an address.

Frank

Frank, thank you. I come home next month. I can't take the horn button for free. Let me send a paypal to you or have the wife send you a check or M.O.

Thanks again,

Wes

[Fesser]

Originally Posted by wesmigletz

Frank, thank you. I come home next month. I can't take the horn button for free. Let me send a paypal to you or have the wife send you a check or M.O.

Thanks again,

Wes

Glad you'll be home soon. The price with shipping is 15.00 firm. No haggling. My paypal is fesser@napanet.net . Stay safe.

[Fesser]

I will get the shipping quotes requested above later this morning. Worked graveyard last night and need to sleep a bit.

[wesmigletz]

Originally Posted by Fesser

Glad you'll be home soon. The price with shipping is 15.00 firm. No haggling. My paypal is fesser@napanet.net . Stay safe.

Thank you, I sent a paypal.

[Fesser]

Originally Posted by VA72C10

Also patch panel shipped to 23112 if shipped with the wheel? Thanks...have someone local that's been looking for a patch and trying to help them out.

Column boxed up is 17lbs, 56" long, average of 6" diameter. UPS wants 29.92 to 23112. Wheel and panel in one box came out to 18x18x8 at 12.4 lbs. UPS wants 24.48 for that.

If you want the column, wheel, and panel (w/ashtray) I would do it all for $100 shipped. The wheel is rough. Many cracks and some gouges. I was actually thinking of practicing restoring a wheel with this one. The cracks aren't wide but they are several.

Frank

[Fesser]

Originally Posted by wesmigletz

Thank you, I sent a paypal.

Thanks much. I will get it out soon. Do you have a build thread for the truck? I looked at the picture links. That color should be very noticeable.
Frank

[VA72C10]

Originally Posted by Fesser

Column boxed up is 17lbs, 56" long, average of 6" diameter. UPS wants 29.92 to 23112. Wheel and panel in one box came out to 18x18x8 at 12.4 lbs. UPS wants 24.48 for that.

If you want the column, wheel, and panel (w/ashtray) I would do it all for $100 shipped. The wheel is rough. Many cracks and some gouges. I was actually thinking of practicing restoring a wheel with this one. The cracks aren't wide but they are several.

Frank

Do you have a fedex close by? Could you print a prepaid label off if I emailed to you? I can get them shipped much cheaper...It's cheaper if you could you drop off at fedex.... if not they could pick up from you and I pay the shipping? Looks like shipping was 54.40 so would you accept 45 if I paid for shipping?

[wesmigletz]

Originally Posted by Fesser

Thanks much. I will get it out soon. Do you have a build thread for the truck? I looked at the picture links. That color should be very noticeable.
Frank

Frank,

I don't have a build thread. The yellow, subsequently Red truck was a different 67 truck. It was painted in rustoleum safety yellow and subsequently, safety red. The paint laid down nice for what it was. It was just something for my son and I to play with. I sold it and my 65 Chevelle conv when we came down on deployment orders in 2011. We ended up not deploying at the time. I replaced the Chevelle with the 57 Chevy.

I actually found the blue 67 on Craigslist in Reno and had it shipped to my house in Tacoma for when I get back to FT Lewis. I haven't seen it yet.

It's going to be stock height (may swap-in 3/4 ton springs), stock wheels and stock dog dish (when I find a set). Eventually my son and I will re-paint it a factory color. I may eventually replace the engine and trans with a LSx/4L60E, but other than that and a set of sway bars, it will be pretty much stock.