67 Short Bed,Rolling Frame,and Cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Desert Rat** · 06-26-2003, 11:39 AM

67 Short Rolling Frame with Bed w/nice metal floor(some driver damage)with tailgate,rust free 67 cab.$1000,or sell with 67 chrome GMC grille,core support,doors,hood,all interior pieces,and a bed full of parts including Rallys,DB crossmember,hinges,cluster,etc,etc $1500 for all?

kxmotox247 · 06-26-2003, 12:34 PM

The bed and frame are what i've been looking for. But I have no way of getting down there to pick stuff up and I've read in a few of your threads that you don't do delivery.
How bad is the damage?
Are GMC frames the same as Chevy?

clean71 · 06-26-2003, 06:09 PM

DR, I SPOKE TO YOU ONCE BEFORE, BUT I GOT SENT TO KUWAIT FOR THE LAST SIX MONTHS AND REALLY COULDN'T GET DOWN TO YOUR PLACE. I'M INTERESTED IN ALL THAT STUFF PLUS THE SEATS TILT AND TACH DASH THAT YOU HAD IN ANOTHER POST. I'VE GOT SOME COMBAT LEAVE AVAILABLE SO I COULD MAKE A DAY OF IT AND COME OUT. LET ME KNOW. P.S. I'LL NEED DIRECTIONS OUT THERE AGAIN. THANKS.

**Desert Rat** · 06-26-2003, 06:47 PM

kxmotox-the bed has a sweet metal floor,and a nice pass side,and the driver side is damaged below the wheelwell areas the bottom in the back,it can be fixed,as its easy to acess from underneath,or i have a nice patch panel,the bed has 100% original paint,theres surface rust from the paint being thin,but no rust holes,no bondo,has a good tailgate.GMC frames are leaf spring versus Chevys coil,but you can use Chevy trailing arms,and center brace and some mounts and convert to coil,if desired,ive done it once,not a big deal,as long as you have a donor chevy long or short frame.I dont have a way to deliver-sorry.where are you located?

**Desert Rat** · 06-26-2003, 06:48 PM

Clean-71 some of the parts may be sold.let me know exactly what you want,and when you can come up.I sent you a email.Id me more than happy to sell this stuff,even if i take a loss,i want it gone.Well now i need to go get some pictures of my 69 GMC !!!too damn hot out,well over 100!

Riveted1 · 06-26-2003, 07:57 PM

Desert Rat, PM'd ya!

06-26-2003, 11:39 AM	#1
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	67 Short Bed,Rolling Frame,and Cab 67 Short Rolling Frame with Bed w/nice metal floor(some driver damage)with tailgate,rust free 67 cab.$1000,or sell with 67 chrome GMC grille,core support,doors,hood,all interior pieces,and a bed full of parts including Rallys,DB crossmember,hinges,cluster,etc,etc $1500 for all?

06-26-2003, 12:34 PM	#2
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	The bed and frame are what i've been looking for. But I have no way of getting down there to pick stuff up and I've read in a few of your threads that you don't do delivery. How bad is the damage? Are GMC frames the same as Chevy? __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

06-26-2003, 06:09 PM	#3
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	interested DR, I SPOKE TO YOU ONCE BEFORE, BUT I GOT SENT TO KUWAIT FOR THE LAST SIX MONTHS AND REALLY COULDN'T GET DOWN TO YOUR PLACE. I'M INTERESTED IN ALL THAT STUFF PLUS THE SEATS TILT AND TACH DASH THAT YOU HAD IN ANOTHER POST. I'VE GOT SOME COMBAT LEAVE AVAILABLE SO I COULD MAKE A DAY OF IT AND COME OUT. LET ME KNOW. P.S. I'LL NEED DIRECTIONS OUT THERE AGAIN. THANKS.

06-26-2003, 07:57 PM	#6
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Desert Rat, PM'd ya! __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-26-2003, 06:47 PM	#4
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	kxmotox-the bed has a sweet metal floor,and a nice pass side,and the driver side is damaged below the wheelwell areas the bottom in the back,it can be fixed,as its easy to acess from underneath,or i have a nice patch panel,the bed has 100% original paint,theres surface rust from the paint being thin,but no rust holes,no bondo,has a good tailgate.GMC frames are leaf spring versus Chevys coil,but you can use Chevy trailing arms,and center brace and some mounts and convert to coil,if desired,ive done it once,not a big deal,as long as you have a donor chevy long or short frame.I dont have a way to deliver-sorry.where are you located?

06-26-2003, 06:48 PM	#5
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Clean-71 some of the parts may be sold.let me know exactly what you want,and when you can come up.I sent you a email.Id me more than happy to sell this stuff,even if i take a loss,i want it gone.Well now i need to go get some pictures of my 69 GMC !!!too damn hot out,well over 100!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.