NE Speedwarning/tach dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BurnoutNova · 06-25-2013, 03:37 PM

Paypal is preferred with the buyer covering fees, or postal money order, but paypal is my preferred method. Shipping is CONUS, not Alaska or Hawaii or anywhere else over seas, unless buyer covers additional shipping charges. Posted prices are shipped plain old USPS.

speed warning/tach dash. I believe this was assembled with original pieces, not an original factory assembled dash, replacement bezel and maybe lens. was in running truck and tach worked occasionally but usually not, and speed warning never buzzed, although there is a harness and buzzer and everything seems to be there and sw needle turns freely. other gauges seemed to work properly. what is pictured is what is included. $400 or offer NEW PRICE $300 plus shipping and fees, so $335 shipped!!!

would trade for 72 extreme bend tow hooks if someone is interested in that

BurnoutNova · 06-25-2013, 05:15 PM

Here are more pics

VA72C10 · 06-25-2013, 06:15 PM

Just an fyi for you and your sellers...it's missing the grounding pin that's on a correct speedwarning tin where the red wire goes through....that may be the reason why there was no buzzing. Was the red wire hooked up anywhere when you removed it?

**gmc 2500 4x4** · 06-25-2013, 09:28 PM

i will offer you 200.00 for it, that pin is a must have<<

**leddzepp** · 06-25-2013, 09:49 PM

The pin is not a "must have". All it does is make a connection between the wire on the gauge, and the buzzer harness. It looks like someone just ran the speedo wire through the hole to connect it to the harness. A lot of setups are done this way and they work just fine. It is not seen when the gauge cluster is mounted.
Posted via Mobile Device

BurnoutNova · 06-25-2013, 09:58 PM

Quote:

Originally Posted by gmc 2500 4x4

i will offer you 200.00 for it, that pin is a must have<<

No thanks, this can live in the parts stash unless someone gets closer to $400

**70shortfleet** · 06-25-2013, 10:29 PM

Quote:

Originally Posted by leddzepp

The pin is not a "must have". All it does is make a connection between the wire on the gauge, and the buzzer harness. It looks like someone just ran the speedo wire through the hole to connect it to the harness. A lot of setups are done this way and they work just fine. It is not seen when the gauge cluster is mounted.
Posted via Mobile Device

2xs - When the needle hits your set speed it grounds and completes the circuit to make the buzzer go off

ckexswb · 06-25-2013, 10:36 PM

$300 plus shipping and fees?

**leddzepp** · 06-26-2013, 01:48 AM

An easy way to test the buzzer is to connect it directly to the positive and negative terminals of a car battery. Pictured here is how I test a buzzer, using a factory harness. I added a couple pigtails, the blue spade terminal ends shown in the upper left are touched to the positive and negative terminals of a car battery...it doesn't matter which, if the buzzer is good it will buzz either way. My guess is it is "dead" as most of them are.
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

**gmc 2500 4x4** · 06-26-2013, 05:32 AM

leddzepp>>you can make anything work, what i meant is its a must have if i was to buy this for 400.00. BurnoutNova, no disrespect, someone will grab this im sure.

BurnoutNova · 06-26-2013, 09:04 AM

Quote:

Originally Posted by leddzepp

An easy way to test the buzzer is to connect it directly to the positive and negative terminals of a car battery. Pictured here is how I test a buzzer, using a factory harness. I added a couple pigtails, the blue spade terminal ends shown in the upper left are touched to the positive and negative terminals of a car battery...it doesn't matter which, if the buzzer is good it will buzz either way. My guess is it is "dead" as most of them are.
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

I tested the buzzer as you showed, and it doesn't buzz. The buzzer must be dead like you guessed.

BurnoutNova · 06-26-2013, 02:13 PM

Quote:

Originally Posted by ckexswb

$300 plus shipping and fees?

Sorry I am going to hold out for a bit more. I would really like to get closer to $400. This cluster parted out should be worth that easy.

Thanks!

BurnoutNova · 06-28-2013, 09:14 AM

Bump

BurnoutNova · 07-02-2013, 03:01 PM

Bump

BurnoutNova · 07-07-2013, 08:00 PM

Bumpity... I'm willing to hear some offers!
Posted via Mobile Device

BurnoutNova · 07-24-2013, 12:44 PM

Quote:

Originally Posted by ckexswb

$300 plus shipping and fees?

I will take this if you are still interested. PM sent

Thanks

BurnoutNova · 07-30-2013, 11:42 AM

Bump who wants to make an offer

06-25-2013, 03:37 PM	#1
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Speedwarning/tach dash Paypal is preferred with the buyer covering fees, or postal money order, but paypal is my preferred method. Shipping is CONUS, not Alaska or Hawaii or anywhere else over seas, unless buyer covers additional shipping charges. Posted prices are shipped plain old USPS. speed warning/tach dash. I believe this was assembled with original pieces, not an original factory assembled dash, replacement bezel and maybe lens. was in running truck and tach worked occasionally but usually not, and speed warning never buzzed, although there is a harness and buzzer and everything seems to be there and sw needle turns freely. other gauges seemed to work properly. what is pictured is what is included. $400 or offer NEW PRICE $300 plus shipping and fees, so $335 shipped!!! would trade for 72 extreme bend tow hooks if someone is interested in that Attached Images Last edited by BurnoutNova; 07-25-2013 at 01:32 PM. Reason: price drop

06-25-2013, 05:15 PM	#2
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Speedwarning/tach dash Here are more pics Attached Images

06-25-2013, 06:15 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning/tach dash Just an fyi for you and your sellers...it's missing the grounding pin that's on a correct speedwarning tin where the red wire goes through....that may be the reason why there was no buzzing. Was the red wire hooked up anywhere when you removed it? __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-25-2013, 09:28 PM	#4
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: Speedwarning/tach dash i will offer you 200.00 for it, that pin is a must have<<

06-25-2013, 09:49 PM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Speedwarning/tach dash The pin is not a "must have". All it does is make a connection between the wire on the gauge, and the buzzer harness. It looks like someone just ran the speedo wire through the hole to connect it to the harness. A lot of setups are done this way and they work just fine. It is not seen when the gauge cluster is mounted. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-25-2013, 10:36 PM	#8
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: Speedwarning/tach dash $300 plus shipping and fees? __________________ 1972 Cheyenne super swb 4x4 "QUEEN" 1996 Dodge ram diesel.... 4x4 "HORSE"

06-26-2013, 01:48 AM	#9
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Speedwarning/tach dash An easy way to test the buzzer is to connect it directly to the positive and negative terminals of a car battery. Pictured here is how I test a buzzer, using a factory harness. I added a couple pigtails, the blue spade terminal ends shown in the upper left are touched to the positive and negative terminals of a car battery...it doesn't matter which, if the buzzer is good it will buzz either way. My guess is it is "dead" as most of them are. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-26-2013, 05:32 AM	#10
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: Speedwarning/tach dash leddzepp>>you can make anything work, what i meant is its a must have if i was to buy this for 400.00. BurnoutNova, no disrespect, someone will grab this im sure.

06-28-2013, 09:14 AM	#13
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Speedwarning/tach dash Bump

07-02-2013, 03:01 PM	#14
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Speedwarning/tach dash Bump

07-07-2013, 08:00 PM	#15
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Speedwarning/tach dash Bumpity... I'm willing to hear some offers! Posted via Mobile Device

07-30-2013, 11:42 AM	#17
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Speedwarning/tach dash Bump who wants to make an offer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.