![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2013
Location: Longmont, Co
Posts: 48
|
Need help Id'ing a part
Hey All,
Well after rebuilding the PSCV, it turns out the rebuilt valve is still faulty. I took it off today since a new one is being delivered today and I found that I smashed the mounting threads with the pinch bolt. The pinch bolt was much harder to install and the valve was much harder to get off. I'll post some pics shortly as they are still on my camera. So the threaded rod that mounts the PSCV and the assist ram further down is the centerlink, yes? If not what is that part? I have two options I guess; 1. take off the part and have a shop chase the threads a bit with a large die, or find a replacement. Does anyone know where to find a replacement? 1967 c10 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2013
Location: Longmont, Co
Posts: 48
|
Re: Need help Id'ing a part
Posted via Mobile Device
|
![]() |
![]() |
![]() |
#3 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,940
|
Re: Need help Id'ing a part
PSCV? Power Steering ?? ??
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2013
Location: Longmont, Co
Posts: 48
|
Re: Need help Id'ing a part
Power steering control valve
Posted via Mobile Device |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2011
Location: Mustang, Oklahoma
Posts: 2,806
|
Re: Need help Id'ing a part
Power steering control valve. This is ram assist power steering, kind of a hydraulic valve and cylinder attached to the center link. Like on some 4wd trucks.
Personally I would change it to integral power steering. But if you want to keep the old ram assist I can check with another guy who just removed his ram assist in favor of the newer style PS. Oh to answer your Q: Yes the rod that connects the tie rods on each end and is threaded into the pscv is the "center link". Posted via Mobile Device Posted via Mobile Device
__________________
Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2013
Location: Longmont, Co
Posts: 48
|
Re: Need help Id'ing a part
Great thanks. Please ask your friend about the old parts.
Thanks!! Posted via Mobile Device |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|