![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
|
Power window regulator removal tip
Here is what I have found to be the best regulator position for removal from the door through the 8"x8" hole in the upper left opening in the door. I removed the regulator/motor assembly via motor and gear section first (turning the assembly upside down prior to removal.)
It took about an hour of experimentation before I figured this out. I have done this task several times before but forgot how to do it. I am sure there are other methods, but this one worked best for me. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Power window regulator removal tip
Thanks for the info, I left mine in and replaced the motor. What a pain
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|