81-UP NOS Sheetmetal wiw - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ksbrktracer · 07-20-2013, 09:29 PM

I have some GM NOS sheetmetal that is at least 15 years old or older that I am not going to use and I thought I might get an idea what it is worth if I decided to sell them.

Right and Left Inner fenders .... 81 and newer

One fender .... RIGHT SIDE (passenger side )

90-91 Suburban / Blazer Radiator Support .....Square Body .

All of these parts still have GM part # stickers on them and have never been installed ....... ALL Boxes are gone .

Somewhere if I can find them I also have a used GMC grill , headlight doors, headlight capsules and wiring harness for the 90-91 Suburban / Blazer.

ksbrktracer · 07-22-2013, 12:38 AM

Anyone have any Ideas or Thoughts ........ ?

**special-K** · 07-22-2013, 06:57 AM

I'm not too up on these year values,but it's important to know if the core support is single or dual headlight. Same with the grille parts.

ksbrktracer · 07-22-2013, 09:19 AM

it is the dual headlight setup ..... Has the small headlights side by side style

**special-K** · 07-24-2013, 07:43 AM

Yeah,that's the hot set-up. I know the complete used change-over goes for $300 in good shape. Just don't know my square body N.O.S. prices. You'll need someone doing a top-end job because these parts are still pretty available in good used condition and lots of aftermarket support since day-one on these trucks. It's the '72-back vehicles that had no aftermarket support till the restoration craze hit that drove up N.O.S. parts. Your stuff is definitely worth more than aftermarket,I know that.

ksbrktracer · 07-29-2013, 10:33 PM

Anyone have a ball park Idea .... I think I'm gonna advertise and see if anyone is interested.

SamsAutoParts73-87 · 08-02-2013, 08:52 AM

if it was me, I would take the price of good quality aftermarket pieces and double it.

In 1988 the list price for a front fender direct from GM was $147 of course with inflation that would come to about $280 today

-Sam

ksbrktracer · 08-02-2013, 01:31 PM

Quote:

Originally Posted by SamsAutoParts73-87

if it was me, I would take the price of good quality aftermarket pieces and double it.

In 1988 the list price for a front fender direct from GM was $147 of course with inflation that would come to about $280 today

-Sam

I agree with you ..... ! I did start an add on them . Didnt price them quite that strong though.....actually I feel like I priced them really fair.

07-20-2013, 09:29 PM	#1
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	81-UP NOS Sheetmetal wiw I have some GM NOS sheetmetal that is at least 15 years old or older that I am not going to use and I thought I might get an idea what it is worth if I decided to sell them. Right and Left Inner fenders .... 81 and newer One fender .... RIGHT SIDE (passenger side ) 90-91 Suburban / Blazer Radiator Support .....Square Body . All of these parts still have GM part # stickers on them and have never been installed ....... ALL Boxes are gone . Somewhere if I can find them I also have a used GMC grill , headlight doors, headlight capsules and wiring harness for the 90-91 Suburban / Blazer. Last edited by ksbrktracer; 07-22-2013 at 09:22 AM.

07-22-2013, 12:38 AM	#2
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: 81-UP NOS Sheetmetal wiw Anyone have any Ideas or Thoughts ........ ?

07-22-2013, 06:57 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 81-UP NOS Sheetmetal wiw I'm not too up on these year values,but it's important to know if the core support is single or dual headlight. Same with the grille parts. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-22-2013, 09:19 AM	#4
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: 81-UP NOS Sheetmetal wiw it is the dual headlight setup ..... Has the small headlights side by side style Attached Images

07-24-2013, 07:43 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 81-UP NOS Sheetmetal wiw Yeah,that's the hot set-up. I know the complete used change-over goes for $300 in good shape. Just don't know my square body N.O.S. prices. You'll need someone doing a top-end job because these parts are still pretty available in good used condition and lots of aftermarket support since day-one on these trucks. It's the '72-back vehicles that had no aftermarket support till the restoration craze hit that drove up N.O.S. parts. Your stuff is definitely worth more than aftermarket,I know that. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-29-2013, 10:33 PM	#6
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: 81-UP NOS Sheetmetal wiw Anyone have a ball park Idea .... I think I'm gonna advertise and see if anyone is interested.

08-02-2013, 08:52 AM	#7
SamsAutoParts73-87 Registered User Join Date: Feb 2013 Location: Rome PA Posts: 340	Re: 81-UP NOS Sheetmetal wiw if it was me, I would take the price of good quality aftermarket pieces and double it. In 1988 the list price for a front fender direct from GM was $147 of course with inflation that would come to about $280 today -Sam __________________ 1987 Chevy R30 CC 454/4spd Work Truck 1979 Chevy K10 SWB 350/4spd/NP205, 1979 Chevy C10 LWB 350/TH350 Project 1981 Chevy K30 350/Th400/NP205 1986 Chevy K30 CUCV 6.2L/TH400/NP208

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.