![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Aug 2013
Location: Council Grove, KS
Posts: 15
|
![]()
Hey guys, on my truck the turn signals did not work when I purchased it, so I replaced the turn signal switch and they still don't work but the flashers work just fine. I don't know if this is a ground problem or not. I have noticed that when the lights are on, the left front will light up. Any help would be greatly appreciated.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: 1972 Chevy Custom 10 Turn signals
I would start with checking the bulbs and make sure they are good , and clean , bulbs and sockets, grounds are real important , also check all wiring connections at all bulbs , frame wiring , get a good test light and jumper wire and start testing all above...good luck on your truck.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,216
|
Re: 1972 Chevy Custom 10 Turn signals
Check the other flasher. The 4 way has its own flasher.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|