|
07-08-2003, 02:16 PM
|
#1 |
|
Registered User
Join Date: Dec 2002
Location: wisconsin
Posts: 75
|
Clear Coat question
i am wondering if u can clear coat over a single stage enamel paint?? or what the best way to get a good shine from an enamel paint would be???
|
|
|
|
07-08-2003, 02:52 PM
|
#2 |
|
Registered User
Join Date: Aug 2002
Location: Farmers Branch, Tx
Posts: 1,009
|
We painted mine with Dupont Centari then wet sanded it and applied second coat of the same. Then wet sanded that and applied clearcoat. I think the Centari is a single stage paint. I don't know much about paint but had help from my brother who only knows a little more than I do. LOL
__________________
http://www.picturetrail.com/jwill41 67 1/2 ton GMC short step side 68 1/2 ton Chevy long fleet side 72 1/2 ton Chevy Suburban 99 1/2 ton Chevy Suburban founder (and only member) of the primer/clearcoat club Last edited by Jwill41; 07-08-2003 at 03:16 PM. |
|
|
|
|
07-08-2003, 04:38 PM
|
#3 |
|
Senior Member
 
Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,477
|
Just read about this the other day. You can clear coat a single stage but the clear coat should be thinner than on a two stage. 2 stage gets 1 mil base and 2 mil clear and a clear coated single gets 2 mil color and 1 mil clear. I'm no painter but I've been studying up on it for the future.
Thanks, Roger
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 |
|
|
|
|
07-08-2003, 05:54 PM
|
#4 |
|
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
They make clears that are formulated for enamel. Never used one though.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
|
|
|
|
07-08-2003, 10:06 PM
|
#5 |
|
"Trucks with Class"
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,158
|
DO IT RIGHT!
Go to the paint supply store. Get the information product sheets for the brand & type paint you are using. It will tell you exactly how to do it, what to use, problems, thinners, time frames and everything required. Don't mix types of paint or guess how to do it...If you don't do it right, there can be some real BAD results. The manufacturers have spend a lot of $$$ figuring out the best way to do this and their info is usually free. Your paint supply store should be your very good friend, if you are going to "do it yourself".
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
