TX GM Performance Parts Serpentine Belt Drive - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lynnfield · 10-14-2013, 07:50 PM

GMPP serpentine belt drive kit part #12497697. This kit had the brackets mocked up, then removed and sent off for powder coating. None of the other parts have been used and are still new in the boxes. I have a couple extra pieces that will be included, a reverse rotation fan that has been powder coated black, and an extra left engine bracket. The extra bracket is used, but does not have the space for the smog pump so it has a little cleaner look over all. However, the powder coating on that piece did not come out as well as the others, it is grey like the others, but has a slight reddish tint to it. I don't think it would be a problem once it's installed if you decide to even use it. This is the kit with out A/C, if you want A/C simply add the compressor. $450 shipped

Here is a link to this kit at Summit, their price is $629:
http://www.summitracing.com/parts/na...7697/overview/

Thanks, Greg

lynnfield · 10-14-2013, 07:51 PM

Aaa

70ptta · 10-14-2013, 08:26 PM

Will it work with a big block

tjmeadows · 10-14-2013, 08:39 PM

Interested in any trades?

lynnfield · 10-14-2013, 08:57 PM

70ptta, small block only

tjmeadows, not really, unless you have some LS swap stuff.

Thanks, Greg

lynnfield · 10-15-2013, 07:54 PM

Bump

lynnfield · 10-18-2013, 06:14 PM

Ttt

**twouvakind** · 10-18-2013, 08:39 PM

Curious, is there a dummy pulley/bracket where the AC would be? Good deal by the way.

TazmanB · 10-18-2013, 09:16 PM

I will take it. What would the pick up price be and how do you want to be paid?

TazmanB · 10-18-2013, 09:34 PM

I just saw that this is the metal kit for up to 86. I am looking for the aluminum kit which is what the guys at Old Air said the Sanden compressor will fit. They said if I wanted to go with the serpentine set up because the conversion bracket they have only works with the aluminum bracket. Do you happen to know what the difference between the metal and aluminum bracket is?

bertvert72 · 10-19-2013, 12:27 PM

Would you do 400 shipped ?

lynnfield · 10-19-2013, 06:02 PM

twouvakind, yes, there is a dummy pulley that mounts in place of the A/C compressor.

TazmanB, this is the aluminum bracket set, the metal bracket set was used from 88 to about 92, after that they were this style. Sending PM with contact info.

bertvert72, I can't go that low.

bertvert72 · 10-19-2013, 07:44 PM

okay I'll do 450 shipped . I'll take it

lynnfield · 10-20-2013, 01:28 PM

Sold to TasmanB

TazmanB · 10-20-2013, 05:51 PM

Good meeting you Greg. Thanks for a good deal on some nice parts.

10-14-2013, 07:51 PM	#2
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: GM Performance Parts Serpentine Belt Drive Aaa Attached Images

10-14-2013, 08:26 PM	#3
70ptta Registered User Join Date: Jul 2007 Location: san jose ca Posts: 172	Re: GM Performance Parts Serpentine Belt Drive Will it work with a big block

10-14-2013, 08:39 PM	#4
tjmeadows Registered User Join Date: Oct 2012 Location: clarksville tennessee Posts: 948	Re: GM Performance Parts Serpentine Belt Drive Interested in any trades?

10-14-2013, 08:57 PM	#5
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: GM Performance Parts Serpentine Belt Drive 70ptta, small block only tjmeadows, not really, unless you have some LS swap stuff. Thanks, Greg

10-15-2013, 07:54 PM	#6
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: GM Performance Parts Serpentine Belt Drive Bump

10-14-2013, 07:50 PM	#1
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	GM Performance Parts Serpentine Belt Drive GMPP serpentine belt drive kit part #12497697. This kit had the brackets mocked up, then removed and sent off for powder coating. None of the other parts have been used and are still new in the boxes. I have a couple extra pieces that will be included, a reverse rotation fan that has been powder coated black, and an extra left engine bracket. The extra bracket is used, but does not have the space for the smog pump so it has a little cleaner look over all. However, the powder coating on that piece did not come out as well as the others, it is grey like the others, but has a slight reddish tint to it. I don't think it would be a problem once it's installed if you decide to even use it. This is the kit with out A/C, if you want A/C simply add the compressor. $450 shipped Here is a link to this kit at Summit, their price is $629: http://www.summitracing.com/parts/na...7697/overview/ Thanks, Greg Attached Images

10-18-2013, 06:14 PM	#7
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: GM Performance Parts Serpentine Belt Drive Ttt

10-18-2013, 08:39 PM	#8
twouvakind Senior Member Join Date: Dec 2011 Location: South Carolina Posts: 2,662	Re: GM Performance Parts Serpentine Belt Drive Curious, is there a dummy pulley/bracket where the AC would be? Good deal by the way.

10-18-2013, 09:16 PM	#9
TazmanB Registered User Join Date: Jan 2011 Location: Arlington Texas Posts: 144	Re: GM Performance Parts Serpentine Belt Drive I will take it. What would the pick up price be and how do you want to be paid? __________________ If you ask the question. Make sure you are ready for the answer. 69 C-10 Longbed (In Progress) Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=568171

10-18-2013, 09:34 PM	#10
TazmanB Registered User Join Date: Jan 2011 Location: Arlington Texas Posts: 144	Re: GM Performance Parts Serpentine Belt Drive I just saw that this is the metal kit for up to 86. I am looking for the aluminum kit which is what the guys at Old Air said the Sanden compressor will fit. They said if I wanted to go with the serpentine set up because the conversion bracket they have only works with the aluminum bracket. Do you happen to know what the difference between the metal and aluminum bracket is? __________________ If you ask the question. Make sure you are ready for the answer. 69 C-10 Longbed (In Progress) Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=568171

10-19-2013, 12:27 PM	#11
bertvert72 Registered User Join Date: Dec 2009 Location: Dickson,Tn Posts: 216	Re: GM Performance Parts Serpentine Belt Drive Would you do 400 shipped ? __________________ Bret Here's a link to my build http://67-72chevytrucks.com/vboard/s...d.php?t=577889

10-19-2013, 06:02 PM	#12
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: GM Performance Parts Serpentine Belt Drive twouvakind, yes, there is a dummy pulley that mounts in place of the A/C compressor. TazmanB, this is the aluminum bracket set, the metal bracket set was used from 88 to about 92, after that they were this style. Sending PM with contact info. bertvert72, I can't go that low.

10-19-2013, 07:44 PM	#13
bertvert72 Registered User Join Date: Dec 2009 Location: Dickson,Tn Posts: 216	Re: GM Performance Parts Serpentine Belt Drive okay I'll do 450 shipped . I'll take it __________________ Bret Here's a link to my build http://67-72chevytrucks.com/vboard/s...d.php?t=577889

10-20-2013, 01:28 PM	#14
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: GM Performance Parts Serpentine Belt Drive Sold to TasmanB

10-20-2013, 05:51 PM	#15
TazmanB Registered User Join Date: Jan 2011 Location: Arlington Texas Posts: 144	Re: GM Performance Parts Serpentine Belt Drive Good meeting you Greg. Thanks for a good deal on some nice parts. __________________ If you ask the question. Make sure you are ready for the answer. 69 C-10 Longbed (In Progress) Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=568171



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.