AR Few Carb engine parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale99 · 10-18-2013, 03:42 PM

All parts located in 72120. Can pick method of shipping, ups, usps, fedex.

1. Edelbrock 2101 intake. Used for about 1 year and likely less then 1000 miles. I am keeping the t-stat neck. Asking 100 plus shipping. sold

2. HEI Billet distributor. This is part of the LMC kit. I have broken the tabs on the wireharness, but it still stays plugged in. Asking 50 plus shipping.

3. Holley 6772 carb. This is old school, was part of the 4160 series. 650cfm double pumper. My first attempt at rebuilding carbs. It has 56 jets up front, 61 jets rear, front and rear power valves. Comes with carb spacer. Asking 40 plus shipping.

**D.PASSMORE** · 10-19-2013, 08:33 AM

Can you do $110.00 shipped for the intake?

Dale99 · 10-19-2013, 08:58 AM

It says 27 for shipping to you via USPS. Id do 115 to your door.

tallbob · 10-19-2013, 10:11 AM

Any play in the throttle shafts of the carb? Looks like all is there? Could not tell in picture but is choke actuation linkage all intact? Was it working properly when it was removed? Thanks much, Bob

Dale99 · 10-19-2013, 12:48 PM

Bob, were not finding any side to side play in the shafts. Needs an air cleaner stud. After the rebuild we got the carb to adjust and drove on it. Engine started acting weird and we went to adjust the carb and it wouldn't. I was told that was an engine problem, not a carb problem. Attached is picture of choke side of it. Far as I know everything but the heli-coil spring for the heat sensitive choke is here... its still on the intake. Which I guess since it hasn't sold officially yet, I can send it with the carb.

**D.PASSMORE** · 10-20-2013, 10:09 AM

Quote:

Originally Posted by Dale99

It says 27 for shipping to you via USPS. Id do 115 to your door.

Sounds good...

Dale99 · 11-12-2013, 10:43 AM

TTT with new prices.

tallbob · 11-12-2013, 11:32 AM

Whats the new price on the carb? I might be willing to take a chance on it if it can be shipped reasonably?
Thanks again, Bob

Dale99 · 11-12-2013, 12:27 PM

40, it was 50.

rich67 · 11-12-2013, 03:48 PM

U cud make a manual choke out of it cudnt u?

Dale99 · 11-12-2013, 05:28 PM

rich, I have no clue. This is my first experience with carbs, and wish I would have tossed it far as I could, rather then attempting to make it work.

10-18-2013, 03:42 PM	#1
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Few Carb engine parts All parts located in 72120. Can pick method of shipping, ups, usps, fedex. 1. Edelbrock 2101 intake. Used for about 1 year and likely less then 1000 miles. I am keeping the t-stat neck. Asking 100 plus shipping. sold 2. HEI Billet distributor. This is part of the LMC kit. I have broken the tabs on the wireharness, but it still stays plugged in. Asking 50 plus shipping. 3. Holley 6772 carb. This is old school, was part of the 4160 series. 650cfm double pumper. My first attempt at rebuilding carbs. It has 56 jets up front, 61 jets rear, front and rear power valves. Comes with carb spacer. Asking 40 plus shipping. Attached Images __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck) Last edited by Dale99; 11-12-2013 at 10:42 AM.

10-19-2013, 08:33 AM	#2
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Few Carb engine parts Can you do $110.00 shipped for the intake? __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

10-19-2013, 08:58 AM	#3
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Few Carb engine parts It says 27 for shipping to you via USPS. Id do 115 to your door.

10-19-2013, 10:11 AM	#4
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Few Carb engine parts Any play in the throttle shafts of the carb? Looks like all is there? Could not tell in picture but is choke actuation linkage all intact? Was it working properly when it was removed? Thanks much, Bob

10-19-2013, 12:48 PM	#5
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Few Carb engine parts Bob, were not finding any side to side play in the shafts. Needs an air cleaner stud. After the rebuild we got the carb to adjust and drove on it. Engine started acting weird and we went to adjust the carb and it wouldn't. I was told that was an engine problem, not a carb problem. Attached is picture of choke side of it. Far as I know everything but the heli-coil spring for the heat sensitive choke is here... its still on the intake. Which I guess since it hasn't sold officially yet, I can send it with the carb. Attached Images

11-12-2013, 10:43 AM	#7
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Few Carb engine parts TTT with new prices.

11-12-2013, 11:32 AM	#8
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Few Carb engine parts Whats the new price on the carb? I might be willing to take a chance on it if it can be shipped reasonably? Thanks again, Bob

11-12-2013, 12:27 PM	#9
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Few Carb engine parts 40, it was 50.

11-12-2013, 03:48 PM	#10
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Few Carb engine parts U cud make a manual choke out of it cudnt u?

11-12-2013, 05:28 PM	#11
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Few Carb engine parts rich, I have no clue. This is my first experience with carbs, and wish I would have tossed it far as I could, rather then attempting to make it work.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.