MI Vent window lot - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TBONE1964** · 11-05-2013, 07:50 PM

Once upon a time, I had a hair brained idea to become a restore of vent windows

Well times have changed for me and I would like to sell this lot. I bought the rebuild kits from two different vendors and the rubber is all made by precision. The hardware came from LMC, I believe. I am not sure where the rivets took off to but if I find them, they are included. I do not have the tool if any one wants it. Not show quality parts but may be enough for a good set of drivers. The real good glass I have is the green tint soft ray. It is somewhat of a mix of parts as you can see by the photos.

Let me know if you want better photos of anything you see. This is all I have

I am thinking about $100.00 shipped to your door.

**70STOVEBOLT** · 11-06-2013, 11:02 AM

Tom, is the chrome in good shape?

**TBONE1964** · 11-06-2013, 11:15 AM

Quote:

Originally Posted by 70STOVEBOLT

Tom, is the chrome in good shape?

Mark,

One of them (drivers side?) has real nice chrome and I think one of the passenger sides is decent. I can take some better photos when I get home tonight. Chrome is tough to photograph.

I am sending you a PM, stay tuned...

**70STOVEBOLT** · 11-06-2013, 01:43 PM

Tom, your pm box is full. I will try again later to send you my email address..

**TBONE1964** · 11-06-2013, 01:53 PM

Sorry about that, just cleared some out.

Thanks
Tom

faribran · 11-06-2013, 02:11 PM

i might be interested in one of your better CHROME ones with seals for a 67, depending on $$. please advise.

**TBONE1964** · 11-06-2013, 02:15 PM

Quote:

Originally Posted by faribran

i might be interested in one of your better CHROME ones with seals for a 67, depending on $$. please advise.

I will get back with you. I need to let 70STOVEBOLT pick what he needs. I should know soon.

Thank you,
Tom

faribran · 11-06-2013, 02:30 PM

ok Tom

rkintn_68 · 11-06-2013, 05:37 PM

i'll take it all 100.00 shipped ...

rkintn_68 · 11-13-2013, 06:01 PM

got it , thanks ... guess usps cut holes in ends for handles ?

**TBONE1964** · 11-13-2013, 06:06 PM

Quote:

Originally Posted by rkintn_68

got it , thanks ... guess usps cut holes in ends for handles ?

Sent you PM regarding the holes for handles.

Glad you got it there.

Thanks again,
Tom

11-05-2013, 07:50 PM	#1
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Vent window lot Once upon a time, I had a hair brained idea to become a restore of vent windows Well times have changed for me and I would like to sell this lot. I bought the rebuild kits from two different vendors and the rubber is all made by precision. The hardware came from LMC, I believe. I am not sure where the rivets took off to but if I find them, they are included. I do not have the tool if any one wants it. Not show quality parts but may be enough for a good set of drivers. The real good glass I have is the green tint soft ray. It is somewhat of a mix of parts as you can see by the photos. Let me know if you want better photos of anything you see. This is all I have I am thinking about $100.00 shipped to your door. Attached Images __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-06-2013, 11:02 AM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,258	Re: Vent window lot Tom, is the chrome in good shape? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-06-2013, 01:43 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,258	Re: Vent window lot Tom, your pm box is full. I will try again later to send you my email address.. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-06-2013, 01:53 PM	#5
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Vent window lot Sorry about that, just cleared some out. Thanks Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-06-2013, 02:11 PM	#6
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Vent window lot i might be interested in one of your better CHROME ones with seals for a 67, depending on $$. please advise. __________________ "

11-06-2013, 02:30 PM	#8
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Vent window lot ok Tom __________________ "

11-06-2013, 05:37 PM	#9
rkintn_68 Registered User Join Date: Sep 2012 Location: clarksville tn Posts: 811	Re: Vent window lot i'll take it all 100.00 shipped ... __________________ 72 GMC K 1500 SWB W/ 68 CHEVY FR/CLIP -- SOLD 70 CHEVY C/10 LWB x 2 ----- SOLD 67 CHEVY SWB IN PROGRESS " ALMOST HEAVEN " Build thread : http://67-72chevytrucks.com/vboard/s...15#post6826315

11-13-2013, 06:01 PM	#10
rkintn_68 Registered User Join Date: Sep 2012 Location: clarksville tn Posts: 811	Re: Vent window lot got it , thanks ... guess usps cut holes in ends for handles ? Attached Images __________________ 72 GMC K 1500 SWB W/ 68 CHEVY FR/CLIP -- SOLD 70 CHEVY C/10 LWB x 2 ----- SOLD 67 CHEVY SWB IN PROGRESS " ALMOST HEAVEN " Build thread : http://67-72chevytrucks.com/vboard/s...15#post6826315

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.