1969 c10 swb "budget build"

[hijenks92]

Guys i am new to the forum. i just sold m 70 chevelle to a co-worker as its needs were far exceeding my budget.

I am taking those funds and purchasing a 69 c10 swb that appears to be in above average condition. I am guessing the cab has some hidden rust issues but not visible inside cab or underneath. as i have done what i can to "inspect" it. the box is in good condition too. I will have to take the build in phases as money becomes availalbe. i have prioritized phases that i think will fit into my annual "spend" and not get the wife upset....

1st phase-suspension upgrade, CPP 3/4 drop, clean and por15 frame. wheels/tires. have 18" wheels from chevelle but are 5x4-3/4 bolt pattern wondering if transdapt wheel adapters will be sufficient(safe) to use these wheels on the truck. 245/45/18 F and 275/40/18 Nitto tires

2nd-big brake kit from cpp 12"F/13" rear

3rd phase-LS 5.3 swap/4L60E. i have the 5.3 but not ready to swap in until i can get all the parts. Do F-body camaro 1999-2002 ls headers work in a truck application. i found a set on craigslist for $100.00

4th phase-body and paint

5th phase-interior procar seats, dakota digital vhl guages, carpet, dashpad etc.

I will post some pics after i get the truck home. As you can see this will be a slow build mainly due to funds. Phases may get bumped around if funds come quicker than anticipated.

I learned my lessons on the chevelle of biting off more than time and money allowed. So this build will be more planned and reserved.

[ksshane]

welcome to the site. Looking forward to seeing your truck and progress.

Many of us are doing the "Budget Build" thing. Myself included.

Lots of great people here happy to help with any of your questions

[hijenks92]

[hijenks92]

So i posted the pics, it appears to have been mostly restored at an earlier time. So either they did it right or it is filled with bondo.....time will tell.

I think i have a decent foundation. unlike my chevelle, i had car fever when i bought that one.

truck parts are considerably more affordable than chevelle sheetmetal.