|
11-25-2013, 11:20 PM
|
#1 |
|
Registered User
Join Date: May 2010
Location: Vancouver,BC
Posts: 64
|
250 to 292
Hey guys,
I was wondering if anyone can give me some tips or advice on a swap i'll be doing next weekend. I'll be picking up a 69 c10 that has a 292 with 3-on the tree and swapping that 292 for the 250 that sits bolted to an auto trans in my current 69 c10. I plan i just unbolting the block from the transmission (which i have never done before) etc. and swapping the motor with all accessories included as the new motor has electronic ignition and a nicer carb setup. Any things i should try and be prepared for? will the motor from a standard trans swap seamlessly to an auto and vice-versa? Aside from new fluids anything that i'll need get that i cannot reuse? bolts, seals, gaskets? I am looking for a quick swap, hopefully to get both motors pulled and reinstalled in one day 
__________________
1966 GMC ShortStep Last edited by Earlthe3rd; 11-25-2013 at 11:27 PM. Reason: originally unclear |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode