Looking for a No Spin Sticker - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Elliot949 · 12-09-2013, 12:54 PM

I am looking for the No Spin differential Sticker that goes inside the cab behind the drivers seat... it looks like this or can someone duplicate this Sticker/decal

fisherman56 · 12-09-2013, 07:05 PM

Yours is behind seat? Mine is above drivers door. Yea I am wondering too were to get one becuz when I start my resto I will have to remove it, too hard to paint around.

Elliot949 · 12-09-2013, 07:47 PM

Quote:

Originally Posted by fisherman56

Yours is behind seat? Mine is above drivers door. Yea I am wondering too were to get one becuz when I start my resto I will have to remove it, too hard to paint around.

I had a bear of a time getting the Sticker off without tearing it... Someone should be able to reprint one from this... Just not sure who...

**nightmare** · 12-09-2013, 08:36 PM

I'd like to know where to get one too

**LockDoc** · 12-09-2013, 08:40 PM

-
I think it would be pretty hard with the foil background...

LockDoc

Elliot949 · 12-09-2013, 08:52 PM

Well they did it once.. surely it can be done again...

**DeadheadNM** · 12-09-2013, 10:08 PM

The foil is doable. Here's an example of the 1972 aux fuel tank decals I reproduced as compared with an OEM example:

67ctener · 12-09-2013, 10:12 PM

I would also like to find one of those

**LockDoc** · 12-09-2013, 10:18 PM

Quote:

Originally Posted by Elliot949

Well they did it once.. surely it can be done again...

No doubt about that if price is no object...

... You might contact DeadheadNM (Pete). He had the Aux fuel tank decals made and they have a foil background. He indicated that they were very pricey to do and they are smaller than the no-spin...

Edit: I type way to slow... Or Pete types too fast

LockDoc

**DeadheadNM** · 12-09-2013, 11:16 PM

Leon is correct - the minimum order I had to place for these made the run cost ~$275. I'm still in the hole actually but it was fun.

flyingtim01 · 12-10-2013, 12:57 PM

I'd be in for one too, if someone found a source...

Elliot949 · 12-10-2013, 06:57 PM

Quote:

Originally Posted by DeadheadNM

Leon is correct - the minimum order I had to place for these made the run cost ~$275. I'm still in the hole actually but it was fun.

What kind of source did you use to do this...

**Ol Blue K20** · 12-10-2013, 07:32 PM

One more factor is the No Spins are two color with a couple of font sizes....

**DeadheadNM** · 12-10-2013, 10:02 PM

Quote:

Originally Posted by Elliot949

What kind of source did you use to do this...

PM sent

Elliot949 · 04-02-2014, 07:51 AM

Can somebody reproduce this???

westong · 04-02-2014, 08:37 AM

Mine was on the radio delete

**LockDoc** · 04-09-2014, 10:38 PM

-
OK guys, I may have come up with something on this. It is almost impossible to take a picture of it because of the reflection. I will try again tomorrow in the natural light.

I am going to send one of them to Dan to check out since he is the one that started this thread. He can post his thoughts on it here. I put an adhesive back on it as well as laminating the front. I do have a lot of hours in the project and I do not have a magic wand to mass produce them. I can print multiples but applying the adhesive backing and laminate front is a one at a time process.

Please do not post that you want one here. Once Dan has a chance to look it over and give it a thumbs up or down I will post a thread in the classified forum and update this thread, or not....

..

LockDoc

BADAZ chevy guy · 04-09-2014, 10:44 PM

Just about any good sign shop can make those. I worked at one in Colorado Springs for a while and they use to make all sorts of stickers on foil background.

**DeadheadNM** · 04-09-2014, 10:50 PM

Leon - thanks for your effort on this.

**LockDoc** · 04-09-2014, 10:55 PM

Quote:

Originally Posted by BADAZ chevy guy

Just about any good sign shop can make those. I worked at one in Colorado Springs for a while and they use to make all sorts of stickers on foil background.

We know that. Have you read the whole thread? DeadheadNM had some AUX TANK labels made and it was pretty expensive. He said he is still in the hole on his project... I'm not looking to put myself in that position. Thanks for your input though.

LockDoc

**LockDoc** · 04-09-2014, 10:58 PM

Quote:

Originally Posted by DeadheadNM

Leon - thanks for your effort on this.

Thanks Pete. I think they look a lot better in the flesh. The picture makes it look pretty washed out.

LockDoc

Elliot949 · 04-10-2014, 08:21 AM

Leon... Looks real good from the picture... I will let you know once it gets here... Only thing that looks a little off in the picture is the KS-10 looks like it needs to be more Bold Print... But overall it looks AWESOME!!!... Guys I will be in contact with Leon over this just as soon as it gets here but I have no reason to believe that this will be any less quality than the lock sets he sells... People that work in perfection tend to do everything with the same level of perfection... Dan

**special-K** · 04-10-2014, 08:59 AM

I have an unused one. They didn't come installed,but were in the glovebox packet. I'm not sure mine is the correct model#,it's been a while since I've had it in my hand. But,I considered having these made by my sign shop buddy. The problem is the model#. A K/10 with require a different sticker from a K/20. I would have the K/20s done because that's the factory device they came with.

**LockDoc** · 04-10-2014, 09:11 AM

Quote:

Originally Posted by Elliot949

Leon... Looks real good from the picture... I will let you know once it gets here... Only thing that looks a little off in the picture is the KS-10 looks like it needs to be more Bold Print... But overall it looks AWESOME!!!... Guys I will be in contact with Leon over this just as soon as it gets here but I have no reason to believe that this will be any less quality than the lock sets he sells... People that work in perfection tend to do everything with the same level of perfection... Dan

Thanks Dan,

As soon as the P.O. opens it will be on it's way. Please post any differences you find here, after you check it with your original. The hardest part was trying to find fonts that matched the original ones.

LockDoc

**LockDoc** · 04-10-2014, 09:14 AM

Quote:

Originally Posted by special-K

I have an unused one. They didn't come installed,but were in the glovebox packet. I'm not sure mine is the correct model#,it's been a while since I've had it in my hand. But,I considered having these made by my sign shop buddy. The problem is the model#. A K/10 with require a different sticker from a K/20. I would have the K/20s done because that's the factory device they came with.

Hi Tim,

It wouldn't be that hard to change the 10 to a 20 on these. It would just take a little time. Thanks for your input.

LockDoc

12-09-2013, 12:54 PM	#1
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Looking for a No Spin Sticker I am looking for the No Spin differential Sticker that goes inside the cab behind the drivers seat... it looks like this or can someone duplicate this Sticker/decal Attached Images

12-09-2013, 07:05 PM	#2
fisherman56 Registered User Join Date: Nov 2013 Location: Youngstown, Oh Posts: 72	Re: Looking for a No Spin Sticker Yours is behind seat? Mine is above drivers door. Yea I am wondering too were to get one becuz when I start my resto I will have to remove it, too hard to paint around.

12-09-2013, 08:40 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,434	Re: Looking for a No Spin Sticker - I think it would be pretty hard with the foil background... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-09-2013, 08:52 PM	#6
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: Looking for a No Spin Sticker Well they did it once.. surely it can be done again...

12-09-2013, 10:08 PM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,357	Re: Looking for a No Spin Sticker The foil is doable. Here's an example of the 1972 aux fuel tank decals I reproduced as compared with an OEM example: Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

12-09-2013, 10:12 PM	#8
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Looking for a No Spin Sticker I would also like to find one of those

12-09-2013, 11:16 PM	#10
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,357	Re: Looking for a No Spin Sticker Leon is correct - the minimum order I had to place for these made the run cost ~$275. I'm still in the hole actually but it was fun. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

12-10-2013, 12:57 PM	#11
flyingtim01 Registered User Join Date: Apr 2011 Location: Clinton, CT Posts: 101	Re: Looking for a No Spin Sticker I'd be in for one too, if someone found a source... __________________ 1971 Chevy K20 350/SM465/NP205

12-10-2013, 07:32 PM	#13
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,026	Re: Looking for a No Spin Sticker One more factor is the No Spins are two color with a couple of font sizes.... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

04-02-2014, 07:51 AM	#15
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: Looking for a No Spin Sticker Can somebody reproduce this???

04-02-2014, 08:37 AM	#16
westong Registered User Join Date: Feb 2013 Location: Mosier,oregon Posts: 295	Re: Looking for a No Spin Sticker Mine was on the radio delete Attached Images

04-09-2014, 10:38 PM	#17
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,434	Re: Looking for a No Spin Sticker - OK guys, I may have come up with something on this. It is almost impossible to take a picture of it because of the reflection. I will try again tomorrow in the natural light. I am going to send one of them to Dan to check out since he is the one that started this thread. He can post his thoughts on it here. I put an adhesive back on it as well as laminating the front. I do have a lot of hours in the project and I do not have a magic wand to mass produce them. I can print multiples but applying the adhesive backing and laminate front is a one at a time process. Please do not post that you want one here. Once Dan has a chance to look it over and give it a thumbs up or down I will post a thread in the classified forum and update this thread, or not.... .. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

04-09-2014, 10:44 PM	#18
BADAZ chevy guy Registered User Join Date: Mar 2014 Location: Clearfield Utah Posts: 638	Re: Looking for a No Spin Sticker Just about any good sign shop can make those. I worked at one in Colorado Springs for a while and they use to make all sorts of stickers on foil background. __________________ My build thread. 1977 C10 short box. >>>> http://67-72chevytrucks.com/vboard/s...d.php?t=624182 700R4 build thread. >>> http://67-72chevytrucks.com/vboard/s...36#post6740236

04-09-2014, 10:50 PM	#19
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,357	Re: Looking for a No Spin Sticker Leon - thanks for your effort on this. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-10-2014, 08:21 AM	#22
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: Looking for a No Spin Sticker Leon... Looks real good from the picture... I will let you know once it gets here... Only thing that looks a little off in the picture is the KS-10 looks like it needs to be more Bold Print... But overall it looks AWESOME!!!... Guys I will be in contact with Leon over this just as soon as it gets here but I have no reason to believe that this will be any less quality than the lock sets he sells... People that work in perfection tend to do everything with the same level of perfection... Dan



Register or Log In To remove these advertisements.

04-10-2014, 08:59 AM	#23
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Looking for a No Spin Sticker I have an unused one. They didn't come installed,but were in the glovebox packet. I'm not sure mine is the correct model#,it's been a while since I've had it in my hand. But,I considered having these made by my sign shop buddy. The problem is the model#. A K/10 with require a different sticker from a K/20. I would have the K/20s done because that's the factory device they came with. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.