Think im going with 22s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

xfsketch · 12-13-2013, 06:30 PM

My summit wish list has the following.

4 - 22x9.5 5x5/5.50 wheels with 5.80 backspacing.
4- 295/30r22 nitto tires

My 1972 chevy custom deluxe lwb is currently at stock stance with 15 inch rims. 1. Will these wheels bolt right up and the truck be drive able? I can take fender wells out if need be.
2. Will i need to get an alignment after mounting the wheels?

Here is a link to a longbed like mine on 22x9s with 295/30 tires.
http://67-72chevytrucks.com/vboard/s...d.php?t=349319
Can anyone shed some light ror me please?

xfsketch · 12-13-2013, 06:39 PM

Im thinking of same sized tires all around so the can be properly rotated down the line. Im still deciding what wheel style. I read on a 72 its best to have 4.5 bs in front and 5 in the rear. But i believe that was for 20" rims.

xfsketch · 12-13-2013, 07:17 PM

These are all on 22s

JakeDW · 12-13-2013, 08:35 PM

Do 20 and 22 looks better.

xfsketch · 12-13-2013, 09:03 PM

I like that look too jake

xfsketch · 12-13-2013, 09:04 PM

What tire sizes would be good for the factory stance? If i do 20x8.5 up front and 22x10 in the back?

JakeDW · 12-13-2013, 09:17 PM

Don't think any lo pro gona look good stock stance.do a 5 and 7 drop 245-40-20 and 285-35-22

Jake

xfsketch · 12-13-2013, 09:20 PM

Ok thanks.im still undecided.i appreciate the info though i will do some more shopping.

davepl · 12-13-2013, 10:19 PM

I just upped mine from 16.5s to 17s, so I'm big pimpin' now!

xfsketch · 12-13-2013, 10:56 PM

Nice clean truck dave!!! I might go with 20s. In the front 22s in back or all 20s. Your truck is in waay better condition than mine! Ive had my truck close to 10 yrs. i always thought if i had new shiny wheels it would look good the way it is ratty in all lol. It goes with new wheels on any ride

big pimpin indeed.

xfsketch · 12-13-2013, 11:03 PM

Check these out! Im really digging the blue trimmed wheels!
http://adaptivestrategies.com/Raceline_Wheels.html

xfsketch · 12-14-2013, 12:10 AM

I like the eagle alloys. Summit has the right sizes available. If i were to run 20x10s in the rear with 5.5 backspacing and 295/40r20 tires. Then 20x8.5 in the front with 4.5 bs and 255/40r20 tires how would that look?

xfsketch · 12-14-2013, 12:22 AM

Them not making a 22 makes me think i should go hoss

C/10 King · 12-14-2013, 01:16 AM

Quote:

Originally Posted by JakeDW

Do 20 and 22 looks better.

Quote:

Originally Posted by xfsketch

I like that look too jake

Here's a 20/22 combo......with a 4.5/6 drop.

Jahloha · 12-14-2013, 01:28 AM

Quote:

Originally Posted by davepl

I just upped mine from 16.5s to 17s, so I'm big pimpin' now!

I have always loved the H2s on our trucks. What size tire you running? Are those chrome or alloy?

xfsketch · 12-14-2013, 01:40 AM

Nice pic c10 king! I would love that exact setup! What sized tires u think those are and can i wait on dropping it? Ty very much! I think im going 22 and 20s

xfsketch · 12-14-2013, 01:53 AM

This link is helpful. The guy lists more info. So 20/22 combo wheels with 4 5/6 drop
http://67-72chevytrucks.com/vboard/s...d.php?t=581217

All i need is a brand of wheel i like from summit. The tires in the first post ont he link above are. 255/40 and 265/40. The blue truck guy says 40 series in front and 35 in the back.

Andy4639 · 12-14-2013, 10:05 AM

Here is my 71 LWB. With said 4.5" front and 5" in back with a 1/4" spacer for tire rub.

xfsketch · 12-14-2013, 03:20 PM

Wow! Nice truck Andy!!! The motor is very unique judging by your specs! Fiero computer on a camaro efi motor! Dude! Im a bit jello lol. Im not much for grey wheels but I really like them on yours

your bed cover is tits! Whered u get it at? I like how you put all the info on that pic of your ride! Great job mayn!

Andy4639 · 12-14-2013, 03:50 PM

Quote:

Originally Posted by xfsketch

Wow! Nice truck Andy!!! The motor is very unique judging by your specs! Fiero computer on a camaro efi motor! Dude! Im a bit jello lol. Im not much for grey wheels but I really like them on yours

your bed cover is tits! Whered u get it at? I like how you put all the info on that pic of your ride! Great job mayn!

Thanks man!
The bed cover is solid fiberglass that the back half opens up. My 42 gallon Surburban tank is in the front half of the bed. It's called a USA truck cover Hwy 21 out of Rockhill SC.
Yea when I did the TPI swap the only company doing them was Street & Performance in Ark. This was their cheap wiring mod but it has worked for me since 1989. After Christmas I have a 2003 6.0 LSx going in it.
The picture I did in paint on my computer.

**DreamRyder1963** · 12-14-2013, 07:08 PM

Quote:

Originally Posted by C/10 King

Here's a 20/22 combo......with a 4.5/6 drop.

What wheels are those?

xfsketch · 12-14-2013, 07:15 PM

Thats cool! Thanx for all the info! That 6.0 sounds sweet! Keep up the killer work!

Im really digging the foose nitrous series wheel. I dont think they have 22x10 though. Im going to email them and see about what they can do

im still undecided lol. Its so hard to find the right look for me.

xfsketch · 12-14-2013, 07:17 PM

It would be nice to run the same size wheels so i can rotate my tires, but the 22/20 combo looks so tough!

xfsketch · 12-14-2013, 07:17 PM

http://www.foosecustomwheels.com/Nitrous-5_c63.htm

xfsketch · 12-14-2013, 08:07 PM

I photoshopped this up. What do yall think?

12-13-2013, 06:30 PM	#1
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Think im going with 22s My summit wish list has the following. 4 - 22x9.5 5x5/5.50 wheels with 5.80 backspacing. 4- 295/30r22 nitto tires My 1972 chevy custom deluxe lwb is currently at stock stance with 15 inch rims. 1. Will these wheels bolt right up and the truck be drive able? I can take fender wells out if need be. 2. Will i need to get an alignment after mounting the wheels? Here is a link to a longbed like mine on 22x9s with 295/30 tires. http://67-72chevytrucks.com/vboard/s...d.php?t=349319 Can anyone shed some light ror me please?

12-13-2013, 06:39 PM	#2
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Im thinking of same sized tires all around so the can be properly rotated down the line. Im still deciding what wheel style. I read on a 72 its best to have 4.5 bs in front and 5 in the rear. But i believe that was for 20" rims. Last edited by xfsketch; 12-13-2013 at 06:53 PM.

12-13-2013, 07:17 PM	#3
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s These are all on 22s

12-13-2013, 08:35 PM	#4
JakeDW Registered User Join Date: Jan 2013 Location: KCMO? Posts: 453	Re: Think im going with 22s Do 20 and 22 looks better.

12-13-2013, 09:03 PM	#5
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s I like that look too jake

12-13-2013, 09:04 PM	#6
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s What tire sizes would be good for the factory stance? If i do 20x8.5 up front and 22x10 in the back?

12-13-2013, 09:17 PM	#7
JakeDW Registered User Join Date: Jan 2013 Location: KCMO? Posts: 453	Re: Think im going with 22s Don't think any lo pro gona look good stock stance.do a 5 and 7 drop 245-40-20 and 285-35-22 Jake

12-13-2013, 09:20 PM	#8
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Ok thanks.im still undecided.i appreciate the info though i will do some more shopping.

12-13-2013, 10:19 PM	#9
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Think im going with 22s I just upped mine from 16.5s to 17s, so I'm big pimpin' now! Attached Images __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

12-13-2013, 10:56 PM	#10
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Nice clean truck dave!!! I might go with 20s. In the front 22s in back or all 20s. Your truck is in waay better condition than mine! Ive had my truck close to 10 yrs. i always thought if i had new shiny wheels it would look good the way it is ratty in all lol. It goes with new wheels on any ride big pimpin indeed.

12-13-2013, 11:03 PM	#11
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Check these out! Im really digging the blue trimmed wheels! http://adaptivestrategies.com/Raceline_Wheels.html

12-14-2013, 12:10 AM	#12
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s I like the eagle alloys. Summit has the right sizes available. If i were to run 20x10s in the rear with 5.5 backspacing and 295/40r20 tires. Then 20x8.5 in the front with 4.5 bs and 255/40r20 tires how would that look?

12-14-2013, 12:22 AM	#13
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Them not making a 22 makes me think i should go hoss

12-14-2013, 01:40 AM	#16
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Nice pic c10 king! I would love that exact setup! What sized tires u think those are and can i wait on dropping it? Ty very much! I think im going 22 and 20s

12-14-2013, 01:53 AM	#17
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s This link is helpful. The guy lists more info. So 20/22 combo wheels with 4 5/6 drop http://67-72chevytrucks.com/vboard/s...d.php?t=581217 All i need is a brand of wheel i like from summit. The tires in the first post ont he link above are. 255/40 and 265/40. The blue truck guy says 40 series in front and 35 in the back.



Register or Log In To remove these advertisements.

12-14-2013, 10:05 AM	#18
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Think im going with 22s Here is my 71 LWB. With said 4.5" front and 5" in back with a 1/4" spacer for tire rub. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-14-2013, 03:20 PM	#19
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Wow! Nice truck Andy!!! The motor is very unique judging by your specs! Fiero computer on a camaro efi motor! Dude! Im a bit jello lol. Im not much for grey wheels but I really like them on yours your bed cover is tits! Whered u get it at? I like how you put all the info on that pic of your ride! Great job mayn!

12-14-2013, 07:15 PM	#22
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Thats cool! Thanx for all the info! That 6.0 sounds sweet! Keep up the killer work! Im really digging the foose nitrous series wheel. I dont think they have 22x10 though. Im going to email them and see about what they can do im still undecided lol. Its so hard to find the right look for me.

12-14-2013, 07:17 PM	#23
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s It would be nice to run the same size wheels so i can rotate my tires, but the 22/20 combo looks so tough!

12-14-2013, 07:17 PM	#24
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s http://www.foosecustomwheels.com/Nitrous-5_c63.htm

12-14-2013, 08:07 PM	#25
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s I photoshopped this up. What do yall think?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.