Need source for OBD2 Female connector and HD relay blocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chuckmc8 · 12-31-2013, 08:04 AM

I've used the standard relay blocks that I sourced from various suppliers and am looking for a HD version for fuel pump and 12V ign source. The ones I have previously used have nice thick wires (actually nice thick insulation and tiny wire) so I have to remove the terminal ends and solder new wires in. Anyone know of heavy duty relay blocks that would eliminate this hassle?

I also need a few OBD2 Female receptacles (mount under the dash) . Wish I had gotten a few last time I was at the scrap yard! The only ones ive found online have to ship from overseas. Anyone know a good source for these?

Thanks

**truckdude239** · 12-31-2013, 09:57 PM

I got my obd port from www.lsx-harness.com

custom70 · 12-31-2013, 11:09 PM

This info cam from lt1swap.com. Very cheap.

OBD2 Port Plastic Connector, 16 Pin www.mouser.com 829-12110250 Qty 1
Terminals - for OBD2 port www.mouser.com 829-12129373 Qty 4
Terminal Lock - secures terminals www.mouser.com 829-12160437 Qty 2

12-31-2013, 08:04 AM	#1
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Need source for OBD2 Female connector and HD relay blocks I've used the standard relay blocks that I sourced from various suppliers and am looking for a HD version for fuel pump and 12V ign source. The ones I have previously used have nice thick wires (actually nice thick insulation and tiny wire) so I have to remove the terminal ends and solder new wires in. Anyone know of heavy duty relay blocks that would eliminate this hassle? I also need a few OBD2 Female receptacles (mount under the dash) . Wish I had gotten a few last time I was at the scrap yard! The only ones ive found online have to ship from overseas. Anyone know a good source for these? Thanks __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

12-31-2013, 09:57 PM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: Need source for OBD2 Female connector and HD relay blocks I got my obd port from www.lsx-harness.com __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-31-2013, 11:09 PM	#3
custom70 Registered User Join Date: Dec 2008 Location: Gastonia,NC Posts: 137	Re: Need source for OBD2 Female connector and HD relay blocks This info cam from lt1swap.com. Very cheap. OBD2 Port Plastic Connector, 16 Pin www.mouser.com 829-12110250 Qty 1 Terminals - for OBD2 port www.mouser.com 829-12129373 Qty 4 Terminal Lock - secures terminals www.mouser.com 829-12160437 Qty 2 __________________ Tim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.