Door clips for glass whiskers?

[Jemo]

I'm sorry, I'm sure this has been asked but I did a search and couldn't find anything. I have a '59 and see slots in the door frame where the glass goes up and down that look like they could be for clips but I can't find these clips in the supplier catalogs.

I bought a 6 ft stick of the whisker and cut it to length. Just not sure how to install. I've heard of people drilling holes and using rivets but I just don't see enough room to try this.

Any help, please?

[oldcouple]

this thread might help, http://67-72chevytrucks.com/vboard/s...=366078&page=4

Stanpro might sell them.

[_Ogre]

i used clear silicone and glued my track in. use lots of tape to hold it in until the silicone dries. the new window track is thinner than the old stuff. i had a 3/16'' gap that i filled with black foam weather stripping. not easy to see here, it's the only pic i have.

[OrrieG]

Originally Posted by oldcouple

this thread might help, http://67-72chevytrucks.com/vboard/s...=366078&page=4

Stanpro might sell them.

In the last video Blackdiesel did in the thread they discuss the whiskers, I think they tacked them in and used very small screws. Mine did not come with the clips either. I plan to predrill for screws and use glue too.

[pipty6]

I've redone mine using truck shop (truckandcarshop.com) out of Orange, Ca. Snapped in tight with no problems.

[judd55]

I used two part epoxy...............worked excellent.

[Get Down]

Originally Posted by pipty6

I've redone mine using truck shop (truckandcarshop.com) out of Orange, Ca. Snapped in tight with no problems.

Could you post a picture please?

[oldcouple]

http://67-72chevytrucks.com/vboard/s...16#post6220316
His came with a kit, its the first one in the pictures.