Shock mount end differences? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hogger54 · 01-28-2014, 05:16 PM

Does anyone know the difference between loop, and bushing & sleeve shock mounts ends?

I can't find anything, and Monroe doesn't seem to like answering emails.

Russell Ashley · 01-29-2014, 09:59 AM

Just guessing here, but I think loop ends go around a mounting stud like my 57 truck has, while bushing and sleeve is the type where the stud on the end of the shock is threaded and goes through a hole in the mounting bracket with rubber bushings and a steel washer on each side.

oldcouple · 01-29-2014, 01:15 PM

http://arrc.ebscohost.com/ebsco_stat...EPLACEMENT.htm

http://www.monroe.com/assets/downloa...engthSheet.pdf

**mr48chev** · 01-29-2014, 03:19 PM

The second link that Oldcouple posted will get you to the pfd that shows almost every Monroe shock with the ends it has and the extended and compressed lengths.

If you aren't a Monroe fan the Monroe number will interchange with almost all brands to some extent.

Hogger54 · 01-29-2014, 03:40 PM

Got all that, just wondering why one would have a bushing, and one wouldn't. What would be the two different installation types that would require the different ends.

01-28-2014, 05:16 PM	#1
Hogger54 Registered User Join Date: Aug 2013 Location: Lumberton, TX Posts: 284	Shock mount end differences? Does anyone know the difference between loop, and bushing & sleeve shock mounts ends? I can't find anything, and Monroe doesn't seem to like answering emails. __________________ My '54 3600 build. My '63 GMC build

01-29-2014, 09:59 AM	#2
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,648	Re: Shock mount end differences? Just guessing here, but I think loop ends go around a mounting stud like my 57 truck has, while bushing and sleeve is the type where the stud on the end of the shock is threaded and goes through a hole in the mounting bracket with rubber bushings and a steel washer on each side.

01-29-2014, 01:15 PM	#3
oldcouple Registered User Join Date: Nov 2011 Location: Winlock Wa Posts: 584	Re: Shock mount end differences? http://arrc.ebscohost.com/ebsco_stat...EPLACEMENT.htm http://www.monroe.com/assets/downloa...engthSheet.pdf __________________ Retired and too busy to work.

01-29-2014, 03:19 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,720	Re: Shock mount end differences? The second link that Oldcouple posted will get you to the pfd that shows almost every Monroe shock with the ends it has and the extended and compressed lengths. If you aren't a Monroe fan the Monroe number will interchange with almost all brands to some extent. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

01-29-2014, 03:40 PM	#5
Hogger54 Registered User Join Date: Aug 2013 Location: Lumberton, TX Posts: 284	Re: Shock mount end differences? Got all that, just wondering why one would have a bushing, and one wouldn't. What would be the two different installation types that would require the different ends. __________________ My '54 3600 build. My '63 GMC build

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.