|
02-27-2014, 09:31 PM
|
#1 |
|
Registered User
Join Date: Jan 2012
Location: Gig harbor washington
Posts: 246
|
would they work
Will this wheel work on the stock 5x5 bolt pattern disk brakes
|
|
|
|
02-27-2014, 09:48 PM
|
#2 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: would they work
What size is it. I had 15" truck ralleys on mine for a long time and they cleared everything just fine.
 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
02-27-2014, 09:49 PM
|
#3 |
|
Registered User
Join Date: Jan 2012
Location: Gig harbor washington
Posts: 246
|
Re: would they work
20s
|
|
|
|
|
02-27-2014, 10:08 PM
|
#4 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: would they work
Quote:
I have 20" Boss 338's on mine. 20"x8.5" wide with 5.5" backspacing. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
02-27-2014, 10:14 PM
|
#5 |
|
Registered User
Join Date: Jan 2012
Location: Gig harbor washington
Posts: 246
|
Re: would they work
I want to know if the will fit over this
|
|
|
|
|
02-27-2014, 11:05 PM
|
#6 |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: would they work
Maybe... what are the dimensions?
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
|
|
|
|
02-27-2014, 11:09 PM
|
#7 | ||||
|
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
|
Re: would they work
What rotor is that? Stock? Aftermarket? Did you ask American Racing Wheels?
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
Quote:
Quote:
|
||||
|
|
|
|
02-27-2014, 11:14 PM
|
#8 | |
|
Registered User
Join Date: Jan 2012
Location: Gig harbor washington
Posts: 246
|
Re: would they work
Quote:
|
|
|
|
|
|
02-27-2014, 11:19 PM
|
#9 |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,771
|
Re: would they work
-
Why not go with these...  LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
02-27-2014, 11:21 PM
|
#10 |
|
20' Daredevil (Ret)
Join Date: May 2003
Location: Jefferson State
Posts: 13,722
|
Re: would they work
^^
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
|
|
|
02-27-2014, 11:27 PM
|
#11 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: would they work
Quote:
 Now for a more serious answer. I just had the rotors machined down so the Boss wheels would fit. They are aftermarket rotors that are in the picture of mine. Then I had to grind the hub cone down at the end to let the wheel cap work. Are these local wheels are you ordering off the net? I would try and see if they fit before buying.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
02-28-2014, 04:50 PM
|
#12 | ||||
|
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
|
Re: would they work
First thing I'd do is measure that hub on the rotor, and call American Racing Wheels. Straight from the horses mouth.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
Quote:
Quote:
|
||||
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
