![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2014
Location: sacramento, california
Posts: 93
|
rear end/ suspension ?'s
So I got this project 66 long bed and Im just trying to find out what rear end this is....
Year Gearing Heres the thing I've got a rear drop kit for this but the adjustable trac bar sold to me as a "sure to work" from a guy with an earlier year c10 maybe a 63 or a 62 I can't remember. Now blame my ignorance(whats lead me to this forum as I here it's one of the best) I took his word for it and I was in my car I couldn't compare the two and only having the truck a few days I hadn't really commited all the details to memory. With that said the things I've been finding as I dig into this truck i'm not sure if it's the trac bar or the rear end thats the wrong so if anyone could let me know how to identity my rear end or can do so from the pictures I'd appreciate it thanks pictures of trac bar I bought and my rear end and also if you could let me know what years that trac bar I bought goes to that'd be rad as I don't want to stick someone else with parts they can't use |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2014
Location: sacramento, california
Posts: 93
|
Re: rear end/ suspension ?'s
So instead of starting a bunch of new treads about questions I have im just gonna keep putting them here so......
The front suspension im not sure if you read my other post but I have either some aftermarket lower control arms or someones creation either way I like the ride and height but no idea where to start to replace what needs replacing and I figure over the years most of you have seen it all so heres some pics any help would be greatly appreciated |
![]() |
![]() |
![]() |
#3 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: rear end/ suspension ?'s
The rear end under your truck is the GM truck 12 bolt. That is what GM put under about 95% of the '63-'72 C10's. As for your panhard bar, the one you bought is a bit strange as it has a tierod on one end. Regardless it is either for a '60-'64 or it is for a lowered truck. The '60-'64's use a longer panhard bar than the '65-'72's.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2014
Location: sacramento, california
Posts: 93
|
Re: rear end/ suspension ?'s
Thanks for the info I was just unaware if the panhard bar location was different for certain years so any ajustable bar 65-72 fits this setup thanks ......is there a way to identify what gearing and such it has I haven't cleaned it off completely yet and thus far have found no #'s to help identify it. is there a particular spot these were stamped with a code I could look up
|
![]() |
![]() |
![]() |
#5 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: rear end/ suspension ?'s
There is an identification code stamped on the passenger side axle tube that tells you what came in that housing from the factory. But who knows that may have changed in the past 48 years. I always recoimmend just pulling the cover and having a look. That way you know for sure what is in there and what the condition is. Besides, the rear end is one of the most neglected parts of a vehicle. It more than likely needs the oil changed. It doesn't take long to do and will only cost you a couple quarts of gear oil and a cover gasket. Then you will know what gear ratio you have, it's condition and peace of mind knowing your rear end has fresh oil in it.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Mar 2014
Location: sacramento, california
Posts: 93
|
Re: rear end/ suspension ?'s
Thanks for the advice and yeah the trac bar was on a lowered step side and not sure of the manufacturer on it either..... it came with the pictured bracket that looks as if it was welded to axel tube
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|