Interchangeable parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BlakeSnelgrove · 03-31-2014, 10:50 PM

Hey guys this is my first time posting with a question and my first time posting at all. But I will give you a little background first I've got a 67 small window cab stepside pickup that I bought about a year ago for five hundred bucks. It wasn't in the best of shape but I thought it was a good deal for the price and I saved it from the crusher. I've done very little work other than pull the bed off and the front cap. So here comes my question my fenders are a little beat up and I've found pretty decent fenders on a gmc and was wondering if the fenders would fit on my '67. The gmc has no reflectors so it would look right on my '67 if they will fit. Thanks again guys for taking the time to look and helping me out!

chevytruckluver · 03-31-2014, 11:25 PM

welcome to the board from Texas!
The fenders are the same on 67 chevy and 67 GMC

71swb4x4 · 03-31-2014, 11:32 PM

I agree with Trey they are the same.

BlakeSnelgrove · 04-01-2014, 11:34 AM

So if a gmc pickup is lacking the fender reflector that means it is also a '67 like it would be if it were a Chevrolet?

**RenoKeene** · 04-01-2014, 01:10 PM

Quote:

Originally Posted by BlakeSnelgrove

So if a gmc pickup is lacking the fender reflector that means it is also a '67 like it would be if it were a Chevrolet?

That is correct.

BlakeSnelgrove · 04-02-2014, 01:10 AM

Thought I would add a couple pictures of my truck so y'all could get an idea of what I am working with!

BlakeSnelgrove · 04-02-2014, 01:12 AM

The driver side...

hotrod68c10 · 04-02-2014, 06:27 PM

I would venture to say that's a smoking deal for five hundred bucks dude!!!

jhwkns · 04-02-2014, 06:53 PM

That's a smokin' deal! Congratulations. I wish I still had my '67.

BlakeSnelgrove · 04-04-2014, 10:44 PM

Well it's got some pretty significant rust in certain panels that will have to be replaced. And I'm only 21 and in college so it's slow going. I do have some big plans though however. I'm still learning I recently got a new used mig welder that will come in handy when I replace those patch panels. It also got a pretty big sent in each fender but I've always liked these trucks and I plan to make her my own. Thanks for all the compliments and help so far guys!!

swamp rat · 04-05-2014, 03:14 AM

I'll give you $500 for it.

**special-K** · 04-05-2014, 07:02 AM

You done good Jethro! And,go buy those '67 fenders quick before someone else does. You lucked out x2 so don't dilly dally. Go snatch 'em up!

motorcritter · 04-05-2014, 07:00 PM

You lucky bastid! A good looking start, for a very cool truck. Getting the MIG welder, right off the bat, is probably the single best move, next to scoring this gem of a machine. As noted by others- get the fenders' then get and engine hoist. You could, end the misery before you start and sell me the thing for what you got in it.

swamp rat · 04-05-2014, 11:01 PM

Oh, if you have not already, please start a build thread when you start working on her.

**special-K** · 04-06-2014, 07:42 AM

How moch for zee trock? I vill geev you money and you sell trock for to me. I geev cash not cashier check thees times for I vreely likes thees trock you are having on thees trailor

03-31-2014, 10:50 PM	#1
BlakeSnelgrove Registered User Join Date: Oct 2013 Location: Bearden, Ar, Magnolia, Ar Posts: 5	Interchangeable parts Hey guys this is my first time posting with a question and my first time posting at all. But I will give you a little background first I've got a 67 small window cab stepside pickup that I bought about a year ago for five hundred bucks. It wasn't in the best of shape but I thought it was a good deal for the price and I saved it from the crusher. I've done very little work other than pull the bed off and the front cap. So here comes my question my fenders are a little beat up and I've found pretty decent fenders on a gmc and was wondering if the fenders would fit on my '67. The gmc has no reflectors so it would look right on my '67 if they will fit. Thanks again guys for taking the time to look and helping me out! Last edited by BlakeSnelgrove; 03-31-2014 at 10:53 PM. Reason: Typos

03-31-2014, 11:25 PM	#2
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Interchangeable parts welcome to the board from Texas! The fenders are the same on 67 chevy and 67 GMC __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

03-31-2014, 11:32 PM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Interchangeable parts I agree with Trey they are the same. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-01-2014, 11:34 AM	#4
BlakeSnelgrove Registered User Join Date: Oct 2013 Location: Bearden, Ar, Magnolia, Ar Posts: 5	Re: Interchangeable parts So if a gmc pickup is lacking the fender reflector that means it is also a '67 like it would be if it were a Chevrolet?

04-02-2014, 01:10 AM	#6
BlakeSnelgrove Registered User Join Date: Oct 2013 Location: Bearden, Ar, Magnolia, Ar Posts: 5	Re: Interchangeable parts Thought I would add a couple pictures of my truck so y'all could get an idea of what I am working with! Attached Images

04-02-2014, 01:12 AM	#7
BlakeSnelgrove Registered User Join Date: Oct 2013 Location: Bearden, Ar, Magnolia, Ar Posts: 5	Re: Interchangeable parts The driver side... Attached Images

04-02-2014, 06:27 PM	#8
hotrod68c10 Registered User Join Date: Dec 2013 Location: Mustang ok Posts: 24	Re: Interchangeable parts I would venture to say that's a smoking deal for five hundred bucks dude!!!

04-02-2014, 06:53 PM	#9
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Re: Interchangeable parts That's a smokin' deal! Congratulations. I wish I still had my '67. __________________ I intend to live forever. So far, so good.

04-04-2014, 10:44 PM	#10
BlakeSnelgrove Registered User Join Date: Oct 2013 Location: Bearden, Ar, Magnolia, Ar Posts: 5	Re: Interchangeable parts Well it's got some pretty significant rust in certain panels that will have to be replaced. And I'm only 21 and in college so it's slow going. I do have some big plans though however. I'm still learning I recently got a new used mig welder that will come in handy when I replace those patch panels. It also got a pretty big sent in each fender but I've always liked these trucks and I plan to make her my own. Thanks for all the compliments and help so far guys!!

04-05-2014, 03:14 AM	#11
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Interchangeable parts I'll give you $500 for it. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-05-2014, 07:02 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Interchangeable parts You done good Jethro! And,go buy those '67 fenders quick before someone else does. You lucked out x2 so don't dilly dally. Go snatch 'em up! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 04-06-2014 at 07:37 AM.

04-05-2014, 07:00 PM	#13
motorcritter Registered User Join Date: Mar 2012 Location: Boulder, CO Posts: 350	Re: Interchangeable parts You lucky bastid! A good looking start, for a very cool truck. Getting the MIG welder, right off the bat, is probably the single best move, next to scoring this gem of a machine. As noted by others- get the fenders' then get and engine hoist. You could, end the misery before you start and sell me the thing for what you got in it. __________________ If 'that which does not kill me, makes me stronger', then I should be Superman by now!

04-05-2014, 11:01 PM	#14
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Interchangeable parts Oh, if you have not already, please start a build thread when you start working on her. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-06-2014, 07:42 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Interchangeable parts How moch for zee trock? I vill geev you money and you sell trock for to me. I geev cash not cashier check thees times for I vreely likes thees trock you are having on thees trailor __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.