![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Late Model Exhaust Manifolds
Has anyone here used this style exhaust manifolds on our trucks? If so, any interference problems (column-auto)? I am thinking about replacing my ram-horns with this type. It sure looks like spark plug access is much easier with these???
__________________
MY MOTTO: Eat it all up, Wear it out, Use the last few drops, Spend all you've got, Late in life, you'll think of the things you didn't do, not the things you did. - Get out and experience life ! . Robbie Robinson a.k.a. TobyArnot (Toe Bee or not toe bee) ![]() |
![]() |
![]() |
![]() |
#2 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Late Model Exhaust Manifolds
No can do.
They won't even come close to bolting on because of interference with the engine mount stands. Draw an imaginary line front to back through the bolt holes. Then look how far they hang below that line. Now, look at your truck and you'll see what I mean.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Re: Late Model Exhaust Manifolds
Don't replace your ram horns. They flow really good compared to the log style!
![]()
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Mar 2003
Location: Colfax-California
Posts: 8,526
|
Re: Late Model Exhaust Manifolds
They will fit IF, you install the big block stands which moves the engine REARWARD about 1-1/2''. If not ramhorns or headers
|
![]() |
![]() |
![]() |
#5 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Late Model Exhaust Manifolds
Or 73-87 mounts....
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Mar 2003
Location: Colfax-California
Posts: 8,526
|
Re: Late Model Exhaust Manifolds
Or that ^^ also
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2012
Location: Providence, RI
Posts: 211
|
Re: Late Model Exhaust Manifolds
I just swapped from a small block to a big block, replaced the small block stands with big block stands and the engine sits in the exact same position as the small block. Just a for what it's worth post.
__________________
Mark 71 C10 Cheyenne 12 Aprilia RSV4 |
![]() |
![]() |
![]() |
#8 |
collector of vintage rust
Join Date: Apr 2004
Location: southern ohio
Posts: 421
|
Re: Late Model Exhaust Manifolds
Also, if you are using an older block(driver's side dipstick),you may run into problems using your stock dipstick. I tried a set of 85ish on an old block and they completely covered it when i pulled the tube insert.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|