04-13-2014, 11:10 AM | #1 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Dash pad
Has any one used one of these? Wondering about the fit and finish. http://www.ebay.com/itm/270984456512...84.m1497.l2649
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-13-2014, 09:38 PM | #2 |
Registered User
Join Date: Jul 2013
Location: Arizona
Posts: 174
|
Re: Dash pad
looks like the same repop one sold other places that people say are flimsy but not bad.
__________________
'82 C-10 SWB / C'd, Z'd, Body'd and Bagged / Shaved firewall, wiper cowl, drip rails, stake holes and tailgate/ 20" & 22" Milanni Voodoo '81 C-10 SWB Parts Truck IRC - http://webchat.snoonet.org/#baggedtrucks |
04-13-2014, 10:13 PM | #3 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
They claim to be an OEM licensed by GM, I hope its not the flimsy droopy one, cause I went ahead and ordered it.
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-14-2014, 08:13 AM | #4 |
Frequent Flyer
Join Date: Aug 2009
Location: Tulsa, OK
Posts: 2,258
|
Re: Dash pad
I ordered my dash pad from them (73-80 style though) & I'm pretty pleased with it. Not perfect but it fits better than a lot of aftermarket pads I've seen.
|
04-14-2014, 11:46 AM | #6 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
[QUOTE=JWall;6627934]I ordered my dash pad from them (73-80 style though) & I'm pretty pleased with it. Not perfect but it fits better than a lot of aftermarket pads I've seen.
Thanks for the input, yours does look good. I will let you guys know how it goes, I wont get it until next week.
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-14-2014, 12:01 PM | #7 | |
Registered User
Join Date: Mar 2014
Location: Clearfield Utah
Posts: 638
|
Re: Dash pad
[quote=Sodell;6628228]
Quote:
jwall, could you post a link where you got yours as well?
__________________
My build thread. 1977 C10 short box. >>>> http://67-72chevytrucks.com/vboard/s...d.php?t=624182 700R4 build thread. >>> http://67-72chevytrucks.com/vboard/s...36#post6740236 |
|
04-14-2014, 12:23 PM | #8 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-14-2014, 03:55 PM | #9 |
Frequent Flyer
Join Date: Aug 2009
Location: Tulsa, OK
Posts: 2,258
|
Re: Dash pad
^ that's the one I got.
|
04-16-2014, 08:33 PM | #11 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
I got the pad in three days. So far pretty happy with it. I have seen a lot of recommendations for Dashesdirect.com. Their urethane pads are $380, so I was happy to find this in the box!...It looks pretty thick and feels more substantial than another I have recently seen.
I will post some pictures when I unwrap it this weekend. I might be able to get it installed. [IMG][/IMG]
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-23-2014, 10:58 PM | #12 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
So far I am not too impressed with my dash pad. I was able to fix the dash insert with some threaded rod, nuts, and two part epoxy. I drilled holes and made some rods to secure the back vents. The front of the insert looks OK, so I fixed it and reused. The dash pad install should have taken about 30 minutes, but I had to trim some of the rubber off so It would fit. The passenger side went in fairly easy and the front bolt holes lined up.
The dash bezel is a WHOLE different story!, The bezel won't fit inside the dash near the drivers door. It has no stiffness there. I messed with it for a while and then drove over to a buddies house and we could not figure it out. I am going to have to shave off some of the bezel near the door, at the corner. I will take some photos and post them when I get around to completing the job. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG]
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-24-2014, 10:39 AM | #13 |
Registered User
Join Date: Mar 2014
Location: CA
Posts: 168
|
Re: Dash pad
I have been through this many times and unless you can find a NOS OEM dash you are better off with less time, headache and frustration just going with a good dash rug. I have never found a repop that fits or looks good enough to justify the cost.
|
04-24-2014, 11:29 AM | #14 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
Yea, I remember going down to the Chevy dealership and buying one for my old Blazer, popped right in.....
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-26-2014, 07:42 PM | #15 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-26-2014, 08:50 PM | #17 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
Man, I am on the fence at this point. If it does not warp this summer, I would have to say yes.
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-26-2014, 09:22 PM | #18 |
Registered User
Join Date: Jul 2013
Location: Arizona
Posts: 174
|
Re: Dash pad
So is this ebay sale the same item as this just less money?
__________________
'82 C-10 SWB / C'd, Z'd, Body'd and Bagged / Shaved firewall, wiper cowl, drip rails, stake holes and tailgate/ 20" & 22" Milanni Voodoo '81 C-10 SWB Parts Truck IRC - http://webchat.snoonet.org/#baggedtrucks |
04-26-2014, 09:46 PM | #19 | |
Registered User
Join Date: Mar 2014
Location: Clearfield Utah
Posts: 638
|
Re: Dash pad
Quote:
__________________
My build thread. 1977 C10 short box. >>>> http://67-72chevytrucks.com/vboard/s...d.php?t=624182 700R4 build thread. >>> http://67-72chevytrucks.com/vboard/s...36#post6740236 |
|
04-26-2014, 09:54 PM | #20 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
I bought the one off of EBay, and mine was made by DashesDirect who sell theirs for $380. I don't understand how they can say these are OEM. The left side of the dash to the right of the bezel is very flimsy. I used a self tapping screw and attached it to the metal to hold it down.
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-26-2014, 09:58 PM | #21 |
Registered User
Join Date: Jul 2013
Location: Arizona
Posts: 174
|
Re: Dash pad
Here's another one claiming to be Dashes Direct with a better pic. Sodell does that look like the same manufacturer as yours?
__________________
'82 C-10 SWB / C'd, Z'd, Body'd and Bagged / Shaved firewall, wiper cowl, drip rails, stake holes and tailgate/ 20" & 22" Milanni Voodoo '81 C-10 SWB Parts Truck IRC - http://webchat.snoonet.org/#baggedtrucks |
04-26-2014, 10:46 PM | #22 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
It is the same, but those are vinyl dashes. More expensive.....
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-26-2014, 10:50 PM | #23 |
Registered User
Join Date: Jul 2013
Location: Arizona
Posts: 174
|
Re: Dash pad
Ahh, I missed where you said urethane. In that case SEM wont work. Wondering if the vinyl versions are better quality since the one in the last link looks nice and has been recommended by a few folks. Thanks for the pics and feedback.
__________________
'82 C-10 SWB / C'd, Z'd, Body'd and Bagged / Shaved firewall, wiper cowl, drip rails, stake holes and tailgate/ 20" & 22" Milanni Voodoo '81 C-10 SWB Parts Truck IRC - http://webchat.snoonet.org/#baggedtrucks |
04-26-2014, 11:27 PM | #24 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: Dash pad
Yep, no paint on these.
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
04-27-2014, 10:37 AM | #25 |
Registered User
Join Date: Mar 2012
Location: Woodbury, Ct.
Posts: 1,680
|
Re: Dash pad
The vinyl dashes are pretty nice.. I bought one from Classic Industries when they had a 20% off..they sent me the eurathane one "in error". When I saw the piece of wood holding it together I knew it wasn't going in my truck..
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|