long block replacement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71 fun · 07-30-2003, 08:44 PM

I put this on the 88-98 board and received no response, could any motor heads help?
I am going to replace a friends 1991 350 tbi engine (rod knock) with a long block bought for this year and model (1991 1/2 ton 4x4) I have built older models and had good luck with them.Should I be aware of any problems I may encounter as to intake manifold, distributor, timing,ect... and where could I find any reference material which would outline change over, thanks.

Longhorn Man · 07-30-2003, 08:59 PM

label every stupid plug and hose. It may look dummy proof, but they normally aren't. If you have a digi cam, use it. Take tons of pics. The longer it is scattered all over the floor, the more important the pictures will be.
Even though we normally think that the newer stuff is more of a pain, in reality, most of the GM chainges make things easier for us.
Chiltons or Haynes oughta be of value.

knucklebuster · 07-30-2003, 09:58 PM

Haynes haynes haynes,I wouldn't attempt it without it!Haven't used chiltons so I don't know about them

71 fun · 07-30-2003, 10:47 PM

Thanks for the quick response,I will follow your leads.

07-30-2003, 08:44 PM	#1
71 fun Registered User Join Date: Jul 2003 Location: Elko,Nv. Posts: 65	long block replacement I put this on the 88-98 board and received no response, could any motor heads help? I am going to replace a friends 1991 350 tbi engine (rod knock) with a long block bought for this year and model (1991 1/2 ton 4x4) I have built older models and had good luck with them.Should I be aware of any problems I may encounter as to intake manifold, distributor, timing,ect... and where could I find any reference material which would outline change over, thanks. __________________ 71 k/20 GMC 79 k/10 GMC 96 k/10 GMC

07-30-2003, 09:58 PM	#3
knucklebuster Failure is NOT an option! Join Date: Feb 2003 Location: greenwood s.c. Posts: 811	Haynes haynes haynes,I wouldn't attempt it without it!Haven't used chiltons so I don't know about them __________________ House payment or truck parts?????.........why does life have to be so complicated? 1969 Chevy Shortbed Fleetside 1969 Camaro ps pb a/c(drove in high school now it's just a yard ornament,but it's next on the list for resto) 1990 Ni$$an hardbody( daily beater that has been really beaten!) 1999 Grand Am GT(wifes ride...never buy a pontiac!!Trust Me)

07-30-2003, 10:47 PM	#4
71 fun Registered User Join Date: Jul 2003 Location: Elko,Nv. Posts: 65	thanks Thanks for the quick response,I will follow your leads. __________________ 71 k/20 GMC 79 k/10 GMC 96 k/10 GMC

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-30-2003, 08:59 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	label every stupid plug and hose. It may look dummy proof, but they normally aren't. If you have a digi cam, use it. Take tons of pics. The longer it is scattered all over the floor, the more important the pictures will be. Even though we normally think that the newer stuff is more of a pain, in reality, most of the GM chainges make things easier for us. Chiltons or Haynes oughta be of value.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.