need custom lowering blocks... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hardwaycooke · 05-19-2014, 10:33 PM

need a 3/8" drop block. Got my drop kit on, right side 3/8 higher and want to lower whole thing 1 inch so gonna level her up at same time.

Where can I get someone to make me block that size??

I dont have material or tools to make my own, btw.

Sklptrljay · 05-19-2014, 11:24 PM

Just go to a metal fabrication/welding shop. They will have some 3/8" flat bar, and a press that can punch the holes you need.

I would bring a u-bolt with me so they can't screw up the holes.

05-19-2014, 10:33 PM	#1
hardwaycooke Registered User Join Date: Sep 2013 Location: anderson, sc Posts: 647	need custom lowering blocks... need a 3/8" drop block. Got my drop kit on, right side 3/8 higher and want to lower whole thing 1 inch so gonna level her up at same time. Where can I get someone to make me block that size?? I dont have material or tools to make my own, btw.

05-19-2014, 11:24 PM	#2
Sklptrljay Registered User Join Date: Apr 2012 Location: Stillwater, Oklahoma Posts: 874	Re: need custom lowering blocks... Just go to a metal fabrication/welding shop. They will have some 3/8" flat bar, and a press that can punch the holes you need. I would bring a u-bolt with me so they can't screw up the holes. __________________ 1971 C/10 SWB, 15x8 Rallys, 4.5" X 7" static drop, C-notched, 350/350, 3.73 Posi. .........A 383 and Gear Vendors are on my bucket list. 1972 GMC 4X4 K1500 Survivor - Sold No matter what problems life throws at you, your time on Earth can be incredibly fulfilling and rewarding.....if you just lower your expectations. -Phil Dunphy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.