|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-01-2014, 10:07 PM
|
#1 |
|
Registered User
Join Date: May 2014
Location: Louisiana
Posts: 28
|
window regulator roller holes
I'm upgrading a 78 Silverado. I ordered replacement rollers and more stuff from LMC. The roller they sent me has a shaft that measures 3/16" and is made to rivet onto the old regulator.
I drilled, ground and punched out the old rollers, and found the hole is 1/4". I found a plastic sleeve that would take up the slack space, but I don't think the rivet will spread enough to make a good tight seal. Anybody got any suggestions? |
|
|
|
12-10-2014, 11:25 PM
|
#2 |
|
Registered User
Join Date: Dec 2013
Location: West, TN
Posts: 312
|
Re: window regulator roller holes
I currently have the same problem. Anyone have any tips on this?
|
|
|
|
|
12-11-2014, 12:15 AM
|
#3 | |
|
Registered User
Join Date: Jun 2014
Location: Orlando Florida
Posts: 1,598
|
Re: window regulator roller holes
Use a washer.
__________________
Quote:
|
|
|
|
|
|
12-12-2014, 11:53 PM
|
#4 |
|
Registered User
Join Date: May 2014
Location: Louisiana
Posts: 28
|
Re: window regulator roller holes
A fellow rebuilder welded them for me.
We had to be careful not to melt the plastic roller. |
|
|
|
|
12-13-2014, 07:40 PM
|
#5 |
|
Registered User
Join Date: Dec 2006
Location: connecticut
Posts: 261
|
Re: window regulator roller holes
Not trying to be a jerk, but I wouldn't call replacing original even worn out original parts with LMC parts an upgrade. There is enough of these trucks out there you should be able to find good used parts.
|
|
|
|
|
12-13-2014, 09:12 PM
|
#6 |
|
Watch out for your cornhole !
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: window regulator roller holes
I just centered them in the hole and spot welded them in place. A MIG welder will eat up a gap that small without trouble. Do it quick and spray it with compressed air afterwards to keep the rollers from getting too hot and melting. My rollers came from O Reillys but I'm sure they're the same Dorman brand ones everybody sells.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
12-15-2014, 01:39 PM
|
#7 | |
|
Registered User
Join Date: May 2014
Location: Louisiana
Posts: 28
|
Re: window regulator roller holes
Quote:
My upgrade includes replacing the dash lens, dash bezel, door panels and hardware, arm rests, window trim and felts, and other interior parts; and refurbishing the vent windows. And I need a right front outer fender and inner fender; and battery holder. I am always interested in finding new sources of supply. My local O'Reillys only had a package of three assorted rollers; only one of the three looked like it would work. |
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
