AZ Parting out 1973 Blazer

[t korinek]

Just got this 73 blazer & will be parting it out, no seats or console in it.

Side mirrors $40 pair in good shape SOLD
Grill mounts for 73-74 $50
Non tilt auto steering column, with key $90
rear bumper $40, brackets $40, license holder $20 SOLD
Interior chrome & stuff is still there.
Headlight & engine harness $25
Under dash harness $50
AC plastic & AC boxes, inside & out $100
Heater control $25
Brake booster & Master cylinder $50
Steering box with arm $75
Steering pump & pulley $30
Not sure what else anyone would want, ask & I'll price it.
All prices + shipping
Big parts (front diff, rear diff, etc. are for pick up only.

For sale locally too
Thanks,
Tom

[bigblock73]

I will take the license holder and light assembly...including a few inches of Blazer harness before the plug connection to the light. Zip is 55448.

[mm1077]

How much for the upper door caps to 98513?

[goldenwestmodels]

Hi

Does it have the cover plate for the electric connection between the body and the top? How much to 95370?

Vern

[t korinek]

Bigblock 73 how about $35 shipped for that stuff?

I'll check on those other pieces on thursday.

Thanks,
Tom

[bigblock73]

Originally Posted by t korinek

Bigblock 73 how about $35 shipped for that stuff?

I'll check on those other pieces on thursday.

Thanks,
Tom

Works for me, send me your payment info and I'll send it over. Thanks.

[71blksuper4x4]

Tom, in line on upper rubber door plugs above vent windows, front door sill plates, seat belt color?, how's the rocker boxes in it? Thanks Trevor

[t korinek]

I'll check thursday Trevor

[dragonball98312]

Does it have the rear interior panels for the cargo area?

[t korinek]

Rear cargo panels were home made

mm1077; the passenger side upper door plug was there, driver wasn't $15 shipped

Trevor ;Sill plates were there, driver quality at best $$15 for all 3 of them (2 driver sides)+ shipping

seat belts were brown, outer retractors were there $20 ea, only 1 inner belt, it did not have a cover & no rear belts.

Rocker boxes are in nice shape, seem to be a lot of trouble to get out?

Goldenwest; forgot to look at the connector cover, will do tomorrow.

[71blksuper4x4]

Tom, any cracks in the aluminum on the sill plates? If not I'll take em.

I am really interested in the rocker boxes. I know they are a pain in the rear to cut out. They are spot welded to the inner rocker, firewall, the outriggers, and possibly under the body mount. I don't know on that because my donor was rotted out. Shoot me a price if you think you would even want to mess with it. Thanks Trevor

[t korinek]

Cover plate is there $7 shipped

[RPOZ11]

Looking for steering column parts.

Need the pieces at the firewall, sealing the area where the steering column goes thru into the engine compartment.

PM me if you have this available...

Thanx!!!

[Wffunk]

Do you still have the rear bumper? if so pm me your phone number. I'm in mesa

[benoit454]

price shipped on the front axle front spring hangers? to 25601?

[t korinek]

RPOZ11 I'll check on those pieces

Wffunk, PM sent

Benoit, let me look at the hangers to make sure they are good, if they are $25 each + $13 shipping sound good?

71blksuper4x4 I'll cut out the rocker boxes for $100 each + shipping & you can have the sill plates for the price of shipping, 2 of them have cracks in them.

[RPOZ11]

Originally Posted by t korinek

RPOZ11 I'll check on those pieces

Thanx

[71blksuper4x4]

Hey Tom, I'd take the rocker boxes for $100/ piece. Can they ship freight to a business or greyhound? Trevor

[t korinek]

Trevor, I can ship whatever is cheapest, to a business by fed ex will help on cost, probably better than greyhound.

[t korinek]

Pic of the driver front spring hanger, has been welded on

[benoit454]

bit more then I was looking to spend on some. I'm doing a SAS project and could get universals or something like these.

[bigblock73]

Got the parts today Tom, thank you for the great transaction and communication. You will have a repeat customer in me.

[71blksuper4x4]

Tom, sending pm. Thanks Trevor

[RPOZ11]

Originally Posted by RPOZ11

Thanx

Originally Posted by t korinek

RPOZ11 I'll check on those pieces

Any luck on having these pieces ?

[t korinek]

RPOZ11 those pieces are there, just have to get the column out, will try to get done asap.

Trevor received your paypal, will start cutting the rocker boxes out this week.

bigblock73 Thanks!
Thanks,
Tom