Wiring question

[ho70]

Been through the threads and.....
1) HEI wire to the ignition unfused on the fuseblock.
2) Have electric choke and I should add a 10 amp inline fuse and connect to other ignition unfused terminal in fuseblock
3) when I add tach, should I tap into ignition unfused as well, say piggyback with choke wire?

[ho70]

anyone?

[leftybass209]

That's one way to do it I suppose. I purchased some packard 56 terminals from Napa and ran one of my wires through the original harness. If you look in your firewall wire gutter there should be a terminated wire sitting up there unused. That's the wire I used for choke.

[ho70]

Originally Posted by leftybass209

That's one way to do it I suppose. I purchased some packard 56 terminals from Napa and ran one of my wires through the original harness. If you look in your firewall wire gutter there should be a terminated wire sitting up there unused. That's the wire I used for choke.

[trac209]

If You mean just it's power wire then yes you can go to any keyed power source. I'm sure your aware the other goes to the distributor.