NC Looking for deluxe steering wheel part

[1963c-10]

Looking for the small plate that holds the horn contact insulator. Its the part in the top left of this pic. The plastic insulator (bottom left) fits into it and then the horn ring goes over it.

[pimpston65]

Originally Posted by 1963c-10

Looking for the small plate that holds the horn contact insulator. Its the part in the top left of this pic. The plastic insulator (bottom left) fits into it and then the horn ring goes over it.

is that piece available aftermarket? cuz if i have the original u can have it and i'll get aftermarket!

[1963c-10]

The contact insulator is, but I'm unsure on the retainer. I have found several places that sell parts for the deluxe wheels, but no retainers yet.

[pimpston65]

Originally Posted by 1963c-10

Looking for the small plate that holds the horn contact insulator. Its the part in the top left of this pic. The plastic insulator (bottom left) fits into it and then the horn ring goes over it.

are you talking bout the white or red piece? this is my aftermart for my 65, but i have a deluxe wheel at my other house with simular parts for my 66 that are oem

[pimpston65]

Originally Posted by 1963c-10

The contact insulator is, but I'm unsure on the retainer. I have found several places that sell parts for the deluxe wheels, but no retainers yet.

ps i still want the other cover!!!

[1963c-10]

I need the silver piece in post #1 top left

[pimpston65]

Originally Posted by 1963c-10

I need the silver piece in post #1 top left

ok, ill check. in my pic it using the black disk and its metal i think its the same but aftermarket if you want oem and if my black piece matches the other one i have u can have mine and i'll just buy another black aftermarket one...

[1963c-10]

the white round insulator in your pick is a part i need too if you have an extra. just let me know and we can work out something since we're parts swapping

[pimpston65]

Originally Posted by 1963c-10

the white round insulator in your pick is a part i need too if you have an extra. just let me know and we can work out something since we're parts swapping

dude you can have em free, also i been troll'n for 66 K10 hubcaps did u ever go on that pick last yr? if so any hubcaps for 17.5 nibs?

[1963c-10]

Yeah, no caps for 64-66. I found 2 61-63 caps for the 3/4 ton, driver condition.

[pimpston65]

Originally Posted by 1963c-10

Yeah, no caps for 64-66. I found 2 61-63 caps for the 3/4 ton, driver condition.

got those parts, hey as long as my aftermarket ring is the same diameter you can have the whole setup, cool?

[1963c-10]

That works. Just let me know what you want and we'll subtract the difference from the seat cover.

[pimpston65]

Originally Posted by 1963c-10

That works. Just let me know what you want and we'll subtract the difference from the seat cover.

the only difference is the oem piece is indexed to line up the plastic piece, so you can have the whole setup, im sure the aftermarket will work fine and im only "oem" anal on somethings... PM me ur shipping info and ur paypal stuff. ps what do i owe you?

[1963c-10]

PM sent

[pimpston65]

Originally Posted by 1963c-10

Looking for the small plate that holds the horn contact insulator. Its the part in the top left of this pic. The plastic insulator (bottom left) fits into it and then the horn ring goes over it.

can you post the order the horn contact stuff goes and is there a spring cuz its been so long since i pulled it all apart...thks

[1963c-10]

For the deluxe wheel or standard?

For the deluxe if looking at the pic in post #13 from wheel to horn
steering wheel
install the spring contact for the horn into the wheel.
1.) the silver disk with the 3 holes
2.) the round plastic disc with the 3 holes punch out of the edge (insulator)
horn trim ring
3.) the black serrated metal disk
4.) the round plastic disk with the 3 holes the screws go through. This will screw everything to the wheel.
Then the washer and nut attach.
Then the horn cap will cover all of this up and mount w/2 screws from the back of the wheel. The cancel cam attaches to the bottom of the wheel.

[1963c-10]

Standard wheel doesn't use the insulator....its the cup style that the cap fits into.

[pimpston65]

Originally Posted by 1963c-10

Standard wheel doesn't use the insulator....its the cup style that the cap fits into.

i have the custom and deluxe style 2 of each wanted to have pairs for the 65C10 and 66 K10. i still need a horn ring for the custom type any leads?

[1963c-10]

hmmm....let me check. I know I have a nice center section, but I don't think I have an extra horn ring. They seem to pit worse than the caps due to being cast. I'll keep my eyes peeled though.

[pimpston65]

Originally Posted by 1963c-10

hmmm....let me check. I know I have a nice center section, but I don't think I have an extra horn ring. They seem to pit worse than the caps due to being cast. I'll keep my eyes peeled though.

is your center section NOS? this is from my stash!!! just need the ring oh and a antenna BAD i dont want new and no one seems to have any old ones, what gives its just an antenna im not askin for a rubber floor mat!!!

[1963c-10]

No its not NOS, but is OEM. Is that one painted? I have seem some that were and some that weren't.

Heres a pic of my two wheels. I have the OEM green cap that came off the right wheel. Left wheel is 100% original. I have an all chrome cap on the left wheel. Let me see if I have better pics

[1963c-10]

Here you go Pimpston65. Like I said in the last post....the OEM green cap off the green wheel I have extra. I had a real nice OEM all chrome cap that I thought looked better.

Bad thing is I have a NOS standard cap still in the box and 2 standard wheels to get rid of now. I've already done the crack work and painted on wheel, so I may just hang onto it and the NOS cap.

And I think I have an old 63 antennae....might need some work. I know its different than the 65's, but would work until you found a correct one. I'll look tonight.

[pimpston65]

Originally Posted by 1963c-10

Looking for the small plate that holds the horn contact insulator. Its the part in the top left of this pic. The plastic insulator (bottom left) fits into it and then the horn ring goes over it.

bought this off ebay today, guess i am anal bout parts... i dont need it,but if its for sale and i have an extra $20 which is rare im buyin...

[pimpston65]

yeah my cap is painted, kinda like medium blue with metallics kinda didnt look up the color code, but its not a repaint, u wanna let go of the original fawn boy??? maybe we can do so more trading!!! also i have a NOS 63 fusebox if u ever need one i cant use it cuz its not the same as 66 its missing a fuse spot on top, i guess i could use it but ima just keeping look for a crisp new one...

[1963c-10]

You mean the fawn center cap? Or the whole wheel? I'm going to repaint the wheel anyways....if you want to swap center caps and they are the same condition I'm ok with that. I can get a close up pic tonight for you of the fawn center cap.