WI Wtb 1967 chevy truck clutch fan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**60-66** · 09-21-2014, 04:41 PM

Looking for a correct 1967 Chevy truck clutch fan, Thanks !

**jmader** · 09-21-2014, 05:16 PM

I have this one

http://67-72chevytrucks.com/vboard/s...d.php?t=632059

**60-66** · 09-21-2014, 07:15 PM

Could you do me a favor and measure the diameter of the hub that bolts to the water pump

**PICKMUP** · 09-21-2014, 08:24 PM

[B]The hubs and blades are the same size on all SB 67-72 clutch fans, but the bolt pattern is smaller on the 67-8. That means the bolt pattern on the WP pulleys must match the fan. jmader's looks correct if it will match your pulleys.

**jmader** · 09-21-2014, 09:06 PM

Sure I'll get you a measurement of both the hub and the bolt pattern tomorrow.

**60-66** · 09-21-2014, 09:14 PM

Quote:

Originally Posted by PICKMUP

[B]The hubs and blades are the same size on all SB 67-72 clutch fans, but the bolt pattern is smaller on the 67-8. That means the bolt pattern on the WP pulleys must match the fan. jmader's looks correct if it will match your pulleys.

Yes and no, I have an identical fan blade In every detail, but, the nos original gm clutch has a larger hub dia that I asked for the diameter on. It will not fit through the hole in the blade. I need the larger hole and bolt patern blade for the clutch to bolt to. Passenger car blades are smaller but look identical , trucks are larger in the center opening, that's why I asked.

**jmader** · 09-22-2014, 08:58 AM

Here are a couple pictures. It looks like the hub is just over 2 1/2 inches wide and the bolts are about 1 3/4 inches apart. Hope this helps.

**60-66** · 09-22-2014, 11:36 AM

That's the one ! PM next

**60-66** · 09-30-2014, 10:29 AM

Need one more as pictured above. Thanks

09-21-2014, 04:41 PM	#1
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Wtb 1967 chevy truck clutch fan Looking for a correct 1967 Chevy truck clutch fan, Thanks ! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-21-2014, 05:16 PM	#2
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Wtb 1967 chevy truck clutch fan I have this one http://67-72chevytrucks.com/vboard/s...d.php?t=632059 __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

09-21-2014, 07:15 PM	#3
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Wtb 1967 chevy truck clutch fan Could you do me a favor and measure the diameter of the hub that bolts to the water pump __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-21-2014, 08:24 PM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,139	Re: Wtb 1967 chevy truck clutch fan [B]The hubs and blades are the same size on all SB 67-72 clutch fans, but the bolt pattern is smaller on the 67-8. That means the bolt pattern on the WP pulleys must match the fan. jmader's looks correct if it will match your pulleys. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-21-2014, 09:06 PM	#5
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Wtb 1967 chevy truck clutch fan Sure I'll get you a measurement of both the hub and the bolt pattern tomorrow. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

09-22-2014, 08:58 AM	#7
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Wtb 1967 chevy truck clutch fan Here are a couple pictures. It looks like the hub is just over 2 1/2 inches wide and the bolts are about 1 3/4 inches apart. Hope this helps. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

09-22-2014, 11:36 AM	#8
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Wtb 1967 chevy truck clutch fan That's the one ! PM next __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

09-30-2014, 10:29 AM	#9
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Wtb 1967 chevy truck clutch fan Need one more as pictured above. Thanks __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.