AZ 1987 1 ton 4x4 frame parts

[t korinek]

This was a 4x4 single rear axle 87 EFI 4speed 205 chevy long bed
Parts off this frame available, getting ready to cut it up, rear most spring shackles are already gone, ask & I'll price it
TBI engine (Core Only) & 4speed 205 trans, big stuff for local pick up only
axles are already sold.
Hydraulic clutch & bell housing set up with the pedal set $250 + shipping
Thanks,
Tom

[1774btcrew]

Tom, If all hydraulic clutch parts are included I will take the set up.

[t korinek]

1774btcrew as far as I know all parts were
there, except the little plastic reservoir that holds the fluid.
Thanks

[JW76]

How much for the brackets, hangers etc. needed to do a 4x4 conversion?

[t korinek]

Every thing you need that I have attached to this frame $225 + shipping.
Thanks,
Tom

[ScottH]

Tom, strange request but would u sell the front section of fuel line that connects to the fuel filter? It has a rubber section to it, can be seen in ur 1st pic. Also could use the filter clamp as well. As long as the rubber is in good condition, shipping would be to 08753.

Thanks
Scott

[JW76]

What would you include specifically?

[t korinek]

jw, whatever pieces you need, front spring hangers, any rivited mounts specific for the 4x4, the front 4x4 crossmember, trans crossmember, whatever you want to pay shipping on.

[JW76]

My truck is a 2x. I would need all hangers and brackets for the front including the core support leaf spring mount pieces, the shock mounts. I will keep my rear leafs and hangers. I could use the engine crossmember and the crossmember just before that one. Can you get me a quote on shipping.

The trailing arms I bought from you a few years back were great. I have them on my 86.

Thanks.

[t korinek]

Hi Scott I have the line off, seemed to be in good shape, need to pull the filter bracket Hows $25 shipped sound?

JW76, I'm going to estimate $75 shipping on all of that, it would be 2 weeks before I could get it all off though, I'd need a commitment before I tear into all of those rivits

Thanks,
Tom

[ScottH]

Sounds good Tom, PM me ur paypal info & I will send payment.

Thanks very much.
Scott

[JW76]

I'll take all the brackets and crossmembers as discussed. PM me how you like to handle it. Thank you.

[rs74]

Man if you was closer I would have been interested in the whole frame. Always the luck. Lol

[Cheng]

Let me know the availability and price for the hydroboost and steering box?

[Chevy3+3]

Did you sell the pedals? was it a hydraboost truck?

[crewcabshorty]

If the truck has helper springs, I am looking for the pads for the helper springs and the brackets that support them . thanks

[brakenit]

Price shipped for the rear upper shock mounts to 47933?

[1971 GMC SHORTY]

Front Axle Pwr Steering a Gear Box? Gear Ratio? Thanks

[lahnen]

are all 4 rear spring hangers gone?