IN 1967-1972 GMC Core Support- Nice - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 10-02-2014, 09:53 PM

----SOLD----- I have a nice GMC core support. $150 picked up in Shelburn, IN. I am sorry but I have no way to ship large items. I am planning a trip to northern IL (Morris, IL swap meet) next weekend Oct. 12 and can take along for pick up along the way or at the event. Post to the thread as per rules. Thanks

**Todd68Chevy** · 10-02-2014, 09:55 PM

Few more pictures

**Todd68Chevy** · 11-01-2014, 03:05 PM

If it does not sell locally before November 28th, I will have this core support at the Super Sunday Swap Meet in Indianapolis, IN on Nov. 30th.

**Todd68Chevy** · 11-10-2014, 06:15 PM

Ttt

Last_Paladin · 11-11-2014, 10:39 AM

I may be interested in this. I am driving back from Kansas on Dec 5th, if you still have it, and can meet along the highway, I will grab it.

**Todd68Chevy** · 11-11-2014, 10:43 AM

Quote:

Originally Posted by Last_Paladin

I may be interested in this. I am driving back from Kansas on Dec 5th, if you still have it, and can meet along the highway, I will grab it.

I am 20 miles south of I70 (U.S. highway 41) and 2 blocks off of highway 41. I will hold with money down. I have several other parts if there is anything else you need. Thanks

Last_Paladin · 11-11-2014, 11:50 AM

Quote:

Originally Posted by Todd68Chevy

I am 20 miles south of I70 (U.S. highway 41) and 2 blocks off of highway 41. I will hold with money down. I have several other parts if there is anything else you need. Thanks

Will be doing a 68 GMC front clip. Any 68 GMC specific parts would be nice.

I also thought the the 67-8 GMC radiator supports were different than the 69-72's?

**Todd68Chevy** · 11-11-2014, 12:54 PM

Quote:

Originally Posted by Last_Paladin

Will be doing a 68 GMC front clip. Any 68 GMC specific parts would be nice.

I also thought the the 67-8 GMC radiator supports were different than the 69-72's?

I do not know the GMC very well so I am not sure. I bought this attached to a grill but not on a truck so I do not know. I asked an other member that has a GMC and he thought they were the same but had different latches and grill supports. He said the latch and grill support I got with it looked like 69 and up. I just looked on GMC Pauls web site and it did list one for 67-68 and one for 69-72 so I am not sure but if there is a difference I would guess it to be 69-72. They use the same fenders. I will see if I can figure something out. Thanks.

**Tim Christian** · 11-11-2014, 08:21 PM

The only difference is 67-68 had a lower valance, splash apron or what ever you want to call it and a 69-72 does not so they would be nut-serts to bolt this on the 67-68 rad support and no nut-serts on the 69-72

**Todd68Chevy** · 11-11-2014, 08:43 PM

Quote:

Originally Posted by Tim Christian

The only difference is 67-68 had a lower valance, splash apron or what ever you want to call it and a 69-72 does not so they would be nut-serts to bolt this on the 67-68 rad support and no nut-serts on the 69-72

Thanks Tim. This one does not have the lower holes so it sounds like it is a 69-72 but will work on a 67-68 if the holes are drilled and nuts added. Thanks

**Cash3481** · 11-11-2014, 10:27 PM

Todd,
I have family in Marion and Terra haute! They are in Vegas currently but I'll find out by tomorrow if they are able to grab it. I'll watch the thread in case it sells first, I'd like to be second in line please!

**Todd68Chevy** · 11-11-2014, 10:39 PM

Quote:

Originally Posted by Cash3481

Todd,
I have family in Marion and Terra haute! They are in Vegas currently but I'll find out by tomorrow if they are able to grab it. I'll watch the thread in case it sells first, I'd like to be second in line please!

I am just 20-25 miles south of Terre Haute so just let me know. Thanks

**Todd68Chevy** · 11-12-2014, 07:28 AM

Quote:

Originally Posted by Last_Paladin

I may be interested in this. I am driving back from Kansas on Dec 5th, if you still have it, and can meet along the highway, I will grab it.

Quote:

Originally Posted by Last_Paladin

Will be doing a 68 GMC front clip. Any 68 GMC specific parts would be nice.

I also thought the the 67-8 GMC radiator supports were different than the 69-72's?

Quote:

Originally Posted by Tim Christian

The only difference is 67-68 had a lower valance, splash apron or what ever you want to call it and a 69-72 does not so they would be nut-serts to bolt this on the 67-68 rad support and no nut-serts on the 69-72

Ok so looks like this is a 69-72 core support but will work on a 67-68 with the addition of the lower holes. If you are interested in it then I will hold it but will require $50 down today to hold it or I will give Cash3481 the chance to get it. I have just had to many want me to hold something and then you never hear from them again and then other sales are missed. I do not have much GMC specific stuff. I have a couple used/ fairly rough grills but I am not sure what years they are. I think they are 69-71. Let me know. Thanks

Quote:

Originally Posted by Cash3481

Todd,
I have family in Marion and Terra haute! They are in Vegas currently but I'll find out by tomorrow if they are able to grab it. I'll watch the thread in case it sells first, I'd like to be second in line please!

I will see what Last_Paladin does today and if he does not want it then it is yours. Thanks

**Todd68Chevy** · 11-12-2014, 10:54 PM

Quote:

Originally Posted by Cash3481

Todd,
I have family in Marion and Terra haute! They are in Vegas currently but I'll find out by tomorrow if they are able to grab it. I'll watch the thread in case it sells first, I'd like to be second in line please!

Ok since Last_Paladin state "I may be interested" instead of "I will take it". He has also been on here and did not respond so I am going to take that as a pass for now so if you are interested Cash3481 you are up if you want it. Thanks

Quote:

Originally Posted by Last_Paladin

I may be interested in this. I am driving back from Kansas on Dec 5th, if you still have it, and can meet along the highway, I will grab it.

**Cash3481** · 11-12-2014, 11:05 PM

Quote:

Originally Posted by Todd68Chevy

Ok since Last_Paladin state "I may be interested" instead of "I will take it". He has also been on here and did not respond so I am going to take that as a pass for now so if you are interested Cash3481 you are up if you want it. Thanks

PM me your paypal and I'll send you some money!

Last_Paladin · 11-12-2014, 11:08 PM

Quote:

Originally Posted by Todd68Chevy

Ok since Last_Paladin state "I may be interested" instead of "I will take it". He has also been on here and did not respond so I am going to take that as a pass for now so if you are interested Cash3481 you are up if you want it. Thanks

You are correct. I am not upset. If you had it and I was driving by, I would grab it.

**Todd68Chevy** · 11-12-2014, 11:12 PM

Quote:

Originally Posted by Cash3481

PM me your paypal and I'll send you some money!

PM Sent Thanks

Quote:

Originally Posted by Last_Paladin

You are correct. I am not upset. If you had it and I was driving by, I would grab it.

Good to hear. Thanks for your interest.

**Todd68Chevy** · 11-12-2014, 11:25 PM

Quote:

Originally Posted by Cash3481

PM me your paypal and I'll send you some money!

Down payment received. SOLD Thanks

**Todd68Chevy** · 11-20-2014, 02:03 PM

Quote:

Originally Posted by Cash3481

PM me your paypal and I'll send you some money!

SOLD-- picked up and paid for, Thanks

10-02-2014, 09:53 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	1967-1972 GMC Core Support- Nice ----SOLD----- I have a nice GMC core support. $150 picked up in Shelburn, IN. I am sorry but I have no way to ship large items. I am planning a trip to northern IL (Morris, IL swap meet) next weekend Oct. 12 and can take along for pick up along the way or at the event. Post to the thread as per rules. Thanks Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 11-12-2014 at 11:26 PM. Reason: item sold

10-02-2014, 09:55 PM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1967-1972 GMC Core Support- Nice Few more pictures Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

11-01-2014, 03:05 PM	#3
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1967-1972 GMC Core Support- Nice If it does not sell locally before November 28th, I will have this core support at the Super Sunday Swap Meet in Indianapolis, IN on Nov. 30th. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

11-10-2014, 06:15 PM	#4
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1967-1972 GMC Core Support- Nice Ttt __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

11-11-2014, 10:39 AM	#5
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: 1967-1972 GMC Core Support- Nice I may be interested in this. I am driving back from Kansas on Dec 5th, if you still have it, and can meet along the highway, I will grab it.

11-11-2014, 08:21 PM	#9
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: 1967-1972 GMC Core Support- Nice The only difference is 67-68 had a lower valance, splash apron or what ever you want to call it and a 69-72 does not so they would be nut-serts to bolt this on the 67-68 rad support and no nut-serts on the 69-72

11-11-2014, 10:27 PM	#11
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: 1967-1972 GMC Core Support- Nice Todd, I have family in Marion and Terra haute! They are in Vegas currently but I'll find out by tomorrow if they are able to grab it. I'll watch the thread in case it sells first, I'd like to be second in line please! __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.