TN Rust Free 1967 CST Parts!!!

[Nsanehotrodz]

These parts have zero rust in them.
Front fenders- $200ea
Radiator Support- $200
Inner Fenders- $150
Doors- $500ea
Tailgate- $200

[67-4x4]

Too bad you wont ship I would take fenders and tailgate

[michael bustamante]

If you were in nm i would swear that was my old 67

[Nsanehotrodz]

ttt

[Grumpy old man]

Please tell me your not selling off good original parts to buy shiny aftermarket junk that doesn't fit ???

[Nsanehotrodz]

Originally Posted by Grumpy old man

Please tell me your not selling off good original parts to buy shiny aftermarket junk that doesn't fit ???

I am selling the parts off this truck to install our new parts to show people how well they fit. If you would like to stop by my shop and see our new parts installed you are more than welcome. I have a truck from every year with our parts installed. We are right off exit 417 in Dandridge.

[In The Ten Ring]

First off, would you ship an inner fender in a wooden crate?

Second, would you take $125.00 for the passenger side inner fender?

[Nsanehotrodz]

Originally Posted by In The Ten Ring

First off, would you ship an inner fender in a wooden crate?

Second, would you take $125.00 for the passenger side inner fender?

Yeah I will take $125 for the passenger side inner fender. Shipping is going to be expensive, will you be at Goodguys Charlotte this week? If so I will bring the parts with me. We will be setup in booth#13

[Grumpy old man]

Originally Posted by Nsanehotrodz

I am selling the parts off this truck to install our new parts to show people how well they fit. If you would like to stop by my shop and see our new parts installed you are more than welcome. I have a truck from every year with our parts installed. We are right off exit 417 in Dandridge.

I'd love to stop by and see your projects and parts being installed in the very near future ,I'm just down the road in Knoxville . See you soon .

[In The Ten Ring]

Originally Posted by Nsanehotrodz

Yeah I will take $125 for the passenger side inner fender. Shipping is going to be expensive, will you be at Goodguys Charlotte this week? If so I will bring the parts with me. We will be setup in booth#13

No I'm afraid not as I have to work. Here, I'll send you a PM.

[rkintn_68]

How about $ 1,000.00 cash for the 2 doors , rad support and 2 inner fenders
picked up ?

[Nsanehotrodz]

Originally Posted by rkintn_68

How about $ 1,000.00 cash for the 2 doors , rad support and 2 inner fenders
picked up ?

When can you pick them up?

[Nsanehotrodz]

Originally Posted by Grumpy old man

I'd love to stop by and see your projects and parts being installed in the very near future ,I'm just down the road in Knoxville . See you soon .

Sounds great call us and make an appointment. Office # 865-940-1466

[rkintn_68]

Originally Posted by Nsanehotrodz

When can you pick them up?

Saturday ...

[rkintn_68]

just seen an add on craigslist looked like same parts , how much for the cab ?

[Nsanehotrodz]

Originally Posted by rkintn_68

Saturday ...

I will be gone Saturday, can you come Friday or Sunday?

Originally Posted by rkintn_68

just seen an add on craigslist looked like same parts , how much for the cab ?

The cab is not for sale.

[In The Ten Ring]

Hey, what's up with this craigslist ad? Same pics but different prices, much lower on CL...

Please explain.

http://knoxville.craigslist.org/pts/4690773941.html

[rkintn_68]

Sorry about jumping line , I will back off until you and The Ten Ring
work out his offer on the one inner fender ... Thanks ...

[Liz]

The craigslist ad states today only and was posted 24 days ago.

[Nsanehotrodz]

Everything is still up for sale... Thanks Liz

[Grumpy old man]

Well..... I stopped out there today and and it wasn't what I expected at all........I responded to the Craigslist ad and made an appointment to go out and look at the tailgate. They didn't know it was Grumpy old man standing in front of them. Yet they allowed me to roam around their shop and look at whatever I wanted to , They were nice ,personable Young (compared to me ) and enthusiastic about their new shop . after quite some time wandering around and checking out their current projects and their shop/equipment I looked at some of the replacement parts and even bought a set of inner/outer rockers and cab corners for a very reasonable price ( I took up their time I felt like I should buy something ) I didn't buy the tailgate but it was rust free along with the rest of the parts and the A/C cab was pretty good . We talked and swapped shop stories for almost 2 hours and I have to say they were nice people and I hope it goes well for them .... All that being said myself personally I'll stick to original parts (when I can ) I'm just not a fan of replacement fenders doors and beds They sound tinny to me when you tap on them compared to "real" 47 year old steel. Would I sell original repairable sheet metal to replace it with after market new and shiny ? NO, I wouldn't ,But as a display piece for my business I might .Would I buy replacement after market parts or original replacements if repairs weren't an option? Well we each have to decide that for ourselves.

[Grumpy old man]

P.S. since I'm going to throw some rockers and cab corners on that '67 how much for a full floor panel to go with them ?

[Nsanehotrodz]

Originally Posted by Grumpy old man

Well..... I stopped out there today and and it wasn't what I expected at all........I responded to the Craigslist ad and made an appointment to go out and look at the tailgate. They didn't know it was Grumpy old man standing in front of them. Yet they allowed me to roam around their shop and look at whatever I wanted to , They were nice ,personable Young (compared to me ) and enthusiastic about their new shop . after quite some time wandering around and checking out their current projects and their shop/equipment I looked at some of the replacement parts and even bought a set of inner/outer rockers and cab corners for a very reasonable price ( I took up their time I felt like I should buy something ) I didn't buy the tailgate but it was rust free along with the rest of the parts and the A/C cab was pretty good . We talked and swapped shop stories for almost 2 hours and I have to say they were nice people and I hope it goes well for them .... All that being said myself personally I'll stick to original parts (when I can ) I'm just not a fan of replacement fenders doors and beds They sound tinny to me when you tap on them compared to "real" 47 year old steel. Would I sell original repairable sheet metal to replace it with after market new and shiny ? NO, I wouldn't ,But as a display piece for my business I might .Would I buy replacement after market parts or original replacements if repairs weren't an option? Well we each have to decide that for ourselves.

It was very nice meeting you today and swapping stories with you. I had no idea who you were until I read this post If you hang around me enough I might change your mind about aftermarket parts

Originally Posted by Grumpy old man

P.S. since I'm going to throw some rockers and cab corners on that '67 how much for a full floor panel to go with them ?

Our full floors are $449.95 with %10 off thru October 31st!

[Grumpy old man]

That's more than I paid for the whole truck !

[Grumpy old man]

Let me know when you want a new shop foreman,I really know how to crack the whip and get things done on schedule !Always pay your help on Thursdays and tell them if your not on time Friday don't bother coming back on Monday ! you would be amazed on how much better your employees are paying their bills and keeping their families happy ! And on time every day . I've seen employees kill a going business fast ! Never settle with lacadaisical employees just because they "SHOW UP"! it's your dream and your money , never socialize with employees .And if your lucky you'll sell at the right moment just like I did , it takes decades !