12-14-2014, 07:26 PM | #1 |
Registered User
Join Date: Nov 2014
Location: CT
Posts: 105
|
Tie Rod Ends
I'm looking at replacing my tie rod ends. Plan is to get all four - the outer left and right, and also the two ends for the drag link - upper and lower. Looking at Moog parts on Summit, it looks like there are different parts based on gear ratio - I can't imagine why that would matter - it says that some are not compatible with 4.10 gears...
http://www.summitracing.com/search/y...2%2B4294947049 Does anyone know what the correct part numbers are for an '84 K20? Seems like a lot of choices for a pretty straightforward part...
__________________
'84 K20 350/465/208 |
12-15-2014, 06:30 AM | #2 |
Registered User
Join Date: Feb 2007
Location: Memphis MI
Posts: 1,851
|
Re: Tie Rod Ends
Suspect it has to do with which front axle you have, which was driven by GVWR and gears.
__________________
1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors |
12-15-2014, 02:38 PM | #3 |
Registered User
Join Date: Nov 2014
Location: CT
Posts: 105
|
Re: Tie Rod Ends
Thanks - I think I figured it out by looking at the parts and matching them up to what I've got. I'm pretty sure the part numbers are as follows in case anyone else is interested:
Moog Chassis Parts ES2026R - Inner right Moog Chassis Parts ES2027L - Inner left Moog Chassis Parts ES2233L - Outer left Moog Chassis Parts ES2234R - Outer right
__________________
'84 K20 350/465/208 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|