Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-20-2015, 09:32 PM | #1 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
1962 C10 Custom Cab Question
Hello,
I have a few questions about the custom cab interior and the engine for a 1962 C10 pickup. I wanted to know if anyone knew where I can find original material for the 62 custom cab interior with the decorative insert, not for the 1961 or 1963 C10's as they are different. Here is a 1962 picture I found and it is the same material I would need, and also I believe this truck came with a 327. At least it has one in it now I think based on the air cleaner on it and the orange visible paint on the intake. It has been basically owned by the same family since 1962, and I saw on the 62 chevy truck brochure it was available for the bigger truck. Could that be custom ordered for the C10? Let me know. thanks Last edited by 64jmb; 01-20-2015 at 09:42 PM. |
01-20-2015, 10:06 PM | #2 |
Senior Member
Join Date: Nov 2010
Location: Hays, KS
Posts: 2,490
|
Re: 1962 C10 Custom Cab Question
As far as I knew, the 66 models were the only ones to come out with a factory 327. I could be wrong though..
|
01-20-2015, 10:42 PM | #3 |
Check The Champ, Demonstrator
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 1962 C10 Custom Cab Question
I found my original 63 stuff at originalauto.com. Give them a shout. You just never know.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
01-21-2015, 12:16 AM | #4 |
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,857
|
Re: 1962 C10 Custom Cab Question
Mine was 283, 327 didn't come out til 1966 according to book. The engine would be green/grey?. Not orange. Would have genarator not alternator.
http://67-72chevytrucks.com/vboard/s...=588074&page=2
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
01-21-2015, 12:19 AM | #5 |
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,857
|
Re: 1962 C10 Custom Cab Question
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
01-21-2015, 12:49 AM | #6 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
The motor I think is grey and the intake is orange to much dirt on it to see it I need to clean it off first to see but the air cleaner looks like the one in the 62 brochure for the big trucks 327.
|
01-21-2015, 12:50 AM | #7 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
Could you special order a 327 for the C10 in 1962?
|
01-21-2015, 12:51 AM | #8 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
|
01-21-2015, 01:27 AM | #9 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
I just found this picture on a older post from oem4me. This is the seat material and seat I need.
|
01-21-2015, 01:31 AM | #10 | |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
Quote:
|
|
01-21-2015, 01:48 AM | #11 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 1962 C10 Custom Cab Question
I don't know if a '62 could have been ordered from the factory with a 327, but it certainly could have been dealer installed for the customer.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
01-21-2015, 02:15 AM | #12 |
Registered User
Join Date: Sep 2014
Location: Olympia, Washington
Posts: 172
|
Re: 1962 C10 Custom Cab Question
My very original, unmolested 62 has a 283 in it with an original generator on it as well.
|
01-21-2015, 02:18 AM | #13 |
Registered User
Join Date: Sep 2014
Location: Olympia, Washington
Posts: 172
|
Re: 1962 C10 Custom Cab Question
My original interior on my 62...well except for the 57 Chevy BelAir clock someone put on the glovebox door back in the day, lol. |
01-21-2015, 12:51 PM | #14 |
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,857
|
Re: 1962 C10 Custom Cab Question
Here's one from BJ Auction
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
01-21-2015, 02:58 PM | #15 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
|
01-21-2015, 03:00 PM | #16 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
|
01-21-2015, 03:07 PM | #17 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
Here is a picture of the engine compartment as left original. Look t the air cleaner, it looks like the C50/60 one or for a 57 chevy 327. Is this stock? It looks correct to me like a factory 327.
|
01-21-2015, 03:23 PM | #18 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
|
01-21-2015, 03:29 PM | #19 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
Also I am going to need a new center for the horn ring are it is a white deluxe steering wheel.
|
01-21-2015, 07:38 PM | #20 |
Senior Member
Join Date: Nov 2010
Location: Hays, KS
Posts: 2,490
|
Re: 1962 C10 Custom Cab Question
My guess is its not a 327, I havent seen an original air cleaner like that on a C10 before. And as far as I know you couldnt get a 327 in any half ton until 66
|
01-21-2015, 08:39 PM | #21 | |
Registered User
Join Date: Apr 2012
Location: Wisconsin
Posts: 3,329
|
Re: 1962 C10 Custom Cab Question
Quote:
__________________
IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK |
|
01-21-2015, 08:45 PM | #22 |
Registered User
Join Date: Jan 2014
Location: Phoenix, AZ
Posts: 366
|
Re: 1962 C10 Custom Cab Question
Thanks for the info.
Is that the correct air cleaner that is in the picture for a 283? I believe the motor is grey and the intake may be orange. |
01-21-2015, 08:58 PM | #23 |
Registered User
Join Date: Apr 2012
Location: Wisconsin
Posts: 3,329
|
Re: 1962 C10 Custom Cab Question
Yes, the round oil bath on the left is correct for 62 283. Your engine would have been a 2 barrel though.
__________________
IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|