The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-24-2015, 12:00 PM   #1
BlueBullet
Senior Member
 
BlueBullet's Avatar
 
Join Date: Apr 2013
Location: Danvers Minnesota
Posts: 967
Interchangeable parts from C50?

What parts if any will work on our trucks?
Thanks
Nathan
__________________
1972 K10 SWB wife's driver
1967 Pontiac GTO
Big Bird - 1972 Longhorn K30
http://67-72chevytrucks.com/vboard/s...d.php?t=753294
BlueBullet is offline   Reply With Quote
Old 01-24-2015, 01:13 PM   #2
Coley
Registered User
 
Coley's Avatar
 
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
Re: Interchangeable parts from C50?

To my recollection...everything in the cab...including the doors.
The dash bezel won't fit without modification but most gauges are re-usable and common.
Coley
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL
1966 Chevy 1/2 ton (Florida- Red/white)
1972 Chevy 1/2 ton (California- Blue/white)
2005 Chevy Silverado HD2500/Duramax
2000 Dodge Ram 1500
Coley is offline   Reply With Quote
Old 01-24-2015, 03:46 PM   #3
gipper
Registered User
 
Join Date: Dec 2010
Location: Fruitport, Michigan
Posts: 172
Re: Interchangeable parts from C50?

Quote:
Originally Posted by BlueBullet View Post
What parts if any will work on our trucks?
Thanks
Nathan
I actually found a perfect steering wheel in one.
Attached Images
 
gipper is offline   Reply With Quote
Old 01-24-2015, 04:14 PM   #4
BlueBullet
Senior Member
 
BlueBullet's Avatar
 
Join Date: Apr 2013
Location: Danvers Minnesota
Posts: 967
Re: Interchangeable parts from C50?

Going to look at one now buying for the doors and a few other stuff I' am going to part out the rest. Not sure how I'm going to go about fixing the corners of the doors though.
Thanks
Nathan
__________________
1972 K10 SWB wife's driver
1967 Pontiac GTO
Big Bird - 1972 Longhorn K30
http://67-72chevytrucks.com/vboard/s...d.php?t=753294
BlueBullet is offline   Reply With Quote
Old 01-24-2015, 04:58 PM   #5
WIDESIDE72
Senior Member
 
WIDESIDE72's Avatar
 
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,500
Re: Interchangeable parts from C50?

I have swapped numerous tach dashes from big gas trucks into c10s. Diesel tachs are different though. Not sure about the comment above.
WIDESIDE72 is offline   Reply With Quote
Old 01-24-2015, 06:52 PM   #6
BlueBullet
Senior Member
 
BlueBullet's Avatar
 
Join Date: Apr 2013
Location: Danvers Minnesota
Posts: 967
Re: Interchangeable parts from C50?

does anybody know if the cab itself is the same if not what the differences are? Can it be modified to work?
__________________
1972 K10 SWB wife's driver
1967 Pontiac GTO
Big Bird - 1972 Longhorn K30
http://67-72chevytrucks.com/vboard/s...d.php?t=753294
BlueBullet is offline   Reply With Quote
Old 01-24-2015, 07:51 PM   #7
DaHos
Senior Member
 
DaHos's Avatar
 
Join Date: Sep 2011
Location: Owosso, Michigan
Posts: 2,859
Re: Interchangeable parts from C50?

Entire firewall/cowl area down to the rockers is different, there is no lower "A" pillar , the front floor section and kick panels are also different. .....

The column mount and pedal box is different and some of the heater box is slightly different.
Attached Images
  
__________________
1967 C10 SWB
Owner - Rustbelt Restorations

Last edited by DaHos; 01-24-2015 at 07:58 PM.
DaHos is offline   Reply With Quote
Old 01-24-2015, 08:01 PM   #8
BlueBullet
Senior Member
 
BlueBullet's Avatar
 
Join Date: Apr 2013
Location: Danvers Minnesota
Posts: 967
Re: Interchangeable parts from C50?

K thanks for the information

Nathan
__________________
1972 K10 SWB wife's driver
1967 Pontiac GTO
Big Bird - 1972 Longhorn K30
http://67-72chevytrucks.com/vboard/s...d.php?t=753294
BlueBullet is offline   Reply With Quote
Old 01-24-2015, 08:47 PM   #9
57larry
Registered User
 
Join Date: Nov 2007
Location: Indianapolis
Posts: 1,161
Re: Interchangeable parts from C50?

are the steering columns the same?
57larry is offline   Reply With Quote
Old 01-25-2015, 01:22 AM   #10
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
Re: Interchangeable parts from C50?

-
Friend of mine and I put a complete floor out of a C-50 in his 4x4. Just had to make a couple of modifications to the front corners and the hump area where it meets the toe board. Here is the thread on it:

http://67-72chevytrucks.com/vboard/s...d.php?t=490272

They are usually in good shape.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 01-25-2015, 01:28 AM   #11
BlueBullet
Senior Member
 
BlueBullet's Avatar
 
Join Date: Apr 2013
Location: Danvers Minnesota
Posts: 967
Re: Interchangeable parts from C50?

LockDoc do you know of any threads that show how to fab corners for the doors from a C50. Thanks for the information
Nathan
__________________
1972 K10 SWB wife's driver
1967 Pontiac GTO
Big Bird - 1972 Longhorn K30
http://67-72chevytrucks.com/vboard/s...d.php?t=753294
BlueBullet is offline   Reply With Quote
Old 01-25-2015, 12:12 PM   #12
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
Re: Interchangeable parts from C50?

Quote:
Originally Posted by BlueBullet View Post
LockDoc do you know of any threads that show how to fab corners for the doors from a C50. Thanks for the information
Nathan

Don't know of anything on the board. I have a set I am going to do but it won't be for a while. I plan on doing an inner and outer piece for strength and peeling the outer skin up an inch or so so that the new outer skin can be crimped around the original inner panel. That should give it plenty of strength.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com