NY 71 SWB Chassis w/ engine, trans & drive train; aluminum slots; Vintage Air

[derotoreut]

I'm selling an original Arizona truck SWB chassis including engine, transmission and driveshaft. The chassis has no rust (only surface) and is in great shape. All mounts including bed, cab and core support are in excellent condition. This is a good opportunity to buy an excellent SWB chassis. Why cut down a LWB frame, when you can have one already set to go? Basically all you need to do is put your sheet metal on this chassis and it's ready to go! Bill of sale only. Aluminum slots extra.

$1500.00 (Paypal, Money Order or Personal Check)

I have a trailer and can assist with delivery for an additional cost, to fellow board members, within a reasonable distance.

Some details concerning the chassis:

Chassis:
* Original 71 SWB chassis 5-lug, including engine, transmission & driveshaft
* Chassis has front and rear sway bars installed
* All fuel lines still on frame and good condition
* All brake lines still on frame and connected and in good condition
* Front to rear original tail light wiring still installed on frame
* Emergency brake still installed and in good working order (I will include the cable that mounts into cab if desired)
* All cab, bed and core support mounts in very good condition
* Front disc brakes and pads in good condition
* Exhaust system in good condition with original exhaust hangers

Engine:
* 250 cu in engine
* Distributor upgraded to HEI
* New fuel pump and filter
* 6-blade radiator fan
* Manual booster
* NOTE: Sanden compressor to be removed from engine unless buyer is interested in buying the Vintage Air system that was installed on this truck.

Transmission:
* 3-speed transmission including shift rods if desired

[derotoreut]

Exhaust is in very good condition with no leaks and appears to be Arizona original.

[derotoreut]

All mounts are in great condition. Even had original ground strap.

[derotoreut]

Engine with HEI, new fuel pump & filter, 6-blade fan, rad hoses, steering gearbox, rag joint & shaft.

[derotoreut]

17" American Racing Ansen Sprint aluminum slots with Goodyear tires.

$800 local pickup. Shipping would probably be very expensive.

Wheels/tires:
* Rims are 17" American Racing Ansen Sprint Aluminum Slots
* Rims are in very good condition with no pitting, just need to be cleaned
* Rims are set up for dual BC mounting (5X5 & 5X5-1/2)
* Tires are Goodyear Wrangler SR-A, 255/75R17
* Tires are in very good condition with 10/32 tread on all 4-tires

[derotoreut]

Vintage Air System. $500 plus shipping. Don't want to part this out. Everything you see here.

Vintage Air:
* Older Vintage Air system, but worked fine in the truck. I will include all parts including the dash control.
* Vintage Air evaporator
* Condenser with dryer and lines (sorry I forgot to get picture as its still mounted on my core support)
* Sanden SD5H14 compressor (currently mounted on engine)
* Dash heat and AC controller
* VA Glovebox liner
* Binary switch (installed in AC line)
* Dash vents and connectors (defroster vents were shot)
* Blower hoses (one was damaged upon removal, but can be easily replaced)

[derotoreut]

Sanden compressor.

[jimer1964]

dan, nice looking frame! how long can you store this? with deposit of course!

[derotoreut]

Originally Posted by jimer1964

dan, nice looking frame! how long can you store this? with deposit of course!

I'm sure we can work something out if you're seriously interested. What are your thoughts?

[jaros44sr]

Dan, would you do $450.00 on the vintage air?

[derotoreut]

Jim, yes I can do $450 + shipping on the Vintage Air. As mentioned above I will have to remove the condenser w/ drier as it's still mounted on the core support. It has the lines that run through the core support as well. Please confirm with "I'll take it" and provide your ZIP and I'll work on getting you shipping costs.

[Number98]

Can you tell me the widths on those Ansens?

[derotoreut]

Originally Posted by Number98

Can you tell me the widths on those Ansens?

Good catch. Sorry I should have listed that. They are 17X7 with 4" backspace. Fit very nicely under the truck with no rubbing problems.

[jaros44sr]

Originally Posted by derotoreut

Jim, yes I can do $450 + shipping on the Vintage Air. As mentioned above I will have to remove the condenser w/ drier as it's still mounted on the core support. It has the lines that run through the core support as well. Please confirm with "I'll take it" and provide your ZIP and I'll work on getting you shipping costs.

Dan, i ll take it. Zip is on my sig
Don t ship the condenser, drier, and compresser. I ll have my son pick them up
Paypal or PMO?

[derotoreut]

Originally Posted by jaros44sr

Dan, i ll take it. Zip is on my sig
Don t ship the condenser, drier, and compresser. I ll have my son pick them up
Paypal or PMO?

Jim,
If you're having your son pick up some of these parts, you may want to have him pick up the evaporator too. That is one of the biggest parts. The rest is all small stuff.

Either Paypal or MO is fine. If PayPal, we have to abide by forum rules to add to fee.

[derotoreut]

Originally Posted by jaros44sr

Dan, i ll take it. Zip is on my sig
Don t ship the condenser, drier, and compresser. I ll have my son pick them up
Paypal or PMO?

Vintage Air system sold to jaros44sr pending receipt of payment. Thanks Jim.

[derotoreut]

Originally Posted by jimer1964

dan, nice looking frame! how long can you store this? with deposit of course!

Chassis with engine, transmission and drivetrain sold to Jimer1964 pending receipt of payment. If payment is not received by Feb 4th, chassis will be re-listed. Thanks Jim.

[derotoreut]

American Racing Ansen Sprint wheels with Goodyear tires still available and up for sale.

[jaros44sr]

Originally Posted by derotoreut

Vintage Air system sold to jaros44sr pending receipt of payment. Thanks Jim.

Dan, my paypal is acting up, can you give me alittle time.....

Sorta like the check is in the mail

[derotoreut]

Originally Posted by jaros44sr

Dan, my paypal is acting up, can you give me alittle time.....

Sorta like the check is in the mail

Looks like Paypal was received. Thanks Jim.

[jaros44sr]

Originally Posted by derotoreut

Looks like Paypal was received. Thanks Jim.

Dan, could you hold on to this for a month?

[derotoreut]

Originally Posted by jaros44sr

Dan, could you hold on to this for a month?

I can do that Jim. Please call me just to discuss. PM sent.

[jaros44sr]

Originally Posted by derotoreut

I can do that Jim. Please call me just to discuss. PM sent.

Dan, nice talking with you this morning, and thank you for all the help...call anytime

Looks like we have to empty our pm box...quite the novel

[jimer1964]

Dan, Thanks for a great deal! Jim

[derotoreut]

Originally Posted by jimer1964

Dan, Thanks for a great deal! Jim

Your welcome Jim. It was a pleasure getting together with you and seeing your collection of trucks and parts. I appreciate the hospitality. It was an awesome experience.