Just bought into a 84 C/10 new to chevy's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

maareck · 08-23-2003, 09:58 AM

I just bought this 84 chevy, its got 94,600 original miles on it. i'm looking to see if anyone knows the years from which i could get a fender to match up to it, the driver and pasenger side fenders have been creased and i'm looking to find out what years had similar boddie styles.

I'm wanting to keep it looking as close as posible but most of the yards out here don't have an 84 that has the front clip.

**old Rusty C10** · 08-23-2003, 10:58 AM

81-87 is the same part number for fenters there are differences with the grille and headlights but the fenders, inner fenders and hood are all the same good lluck with the new truck and welcome to the board from NJ

Billy G · 08-23-2003, 12:25 PM

Welcome to the board from ANOTHER Texan. Im near Baytown. There's alot of good info here....and alot of knowledgeable people here too. They'll guide ya in the right direction.

Billy G

junkyardpartseeker · 08-23-2003, 01:20 PM

The 81-87 trucks and 81-91 suburban fenders are all the same. But the front clip and grille area for a 84 is different. I know, I have a 84 suburban and changed out a rusted front clip. For that item, you will have to locate a clip from a 83 or 84 truck, blazer or suburban only. The others will not mate up right. Don't know why, but that is what I found out when I researched it to locate mine. Welcome to the board, if you need any help locating parts, just drop me a line, I do a lot of helping out here.

Take care

Tommy Davis

RiverCityChevy · 08-23-2003, 09:39 PM

welcome, glad you came, I have a 84 scottsdale myself, if you need any parts let me know I got them from front bumper to back bumper in memphis

phantom dually · 08-24-2003, 12:05 PM

Welcome to the board!!

**crossy** · 08-24-2003, 01:33 PM

Texas is a BIG state, better put your area in the profile. there are a LOT of helpful guys here from all areas of Texas & Ok. , especially DFW area. There may be someone near you that has what you need at home .
welcome aboard -mostly calm seas here.
Now you have already heard from 2 of the whopping 4 board members that are members from Jersey or NooJoisey if you are from where rustyc10 is from. .

DAVE-resident ass clown

08-23-2003, 09:58 AM	#1
maareck Registered User Join Date: Aug 2003 Location: Weatherford, Texas Posts: 5	Just bought into a 84 C/10 new to chevy's I just bought this 84 chevy, its got 94,600 original miles on it. i'm looking to see if anyone knows the years from which i could get a fender to match up to it, the driver and pasenger side fenders have been creased and i'm looking to find out what years had similar boddie styles. I'm wanting to keep it looking as close as posible but most of the yards out here don't have an 84 that has the front clip.

08-23-2003, 10:58 AM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	81-87 is the same part number for fenters there are differences with the grille and headlights but the fenders, inner fenders and hood are all the same good lluck with the new truck and welcome to the board from NJ __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-23-2003, 12:25 PM	#3
Billy G Registered User Join Date: May 2003 Location: Dayton, Tx (in Old River) Posts: 286	Welcome to the board from ANOTHER Texan. Im near Baytown. There's alot of good info here....and alot of knowledgeable people here too. They'll guide ya in the right direction. Billy G __________________ My FAMOUS LAST WORDS...."Ima Gonna!!" - 1970 GMC 1500 swb/step 250 I-6 3 spd - "The GEM" - 1976 Chev Scotsdale swb/step 350/350 - "The JEWEL" - 1982 Chev C-10 swb/step 250 I-6 3 spd - - 2001 Chev Silverado LT -

08-23-2003, 01:20 PM	#4
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	welcome The 81-87 trucks and 81-91 suburban fenders are all the same. But the front clip and grille area for a 84 is different. I know, I have a 84 suburban and changed out a rusted front clip. For that item, you will have to locate a clip from a 83 or 84 truck, blazer or suburban only. The others will not mate up right. Don't know why, but that is what I found out when I researched it to locate mine. Welcome to the board, if you need any help locating parts, just drop me a line, I do a lot of helping out here. Take care Tommy Davis __________________ junkyardpartseeker@sbcglobal.net

08-23-2003, 09:39 PM	#5
RiverCityChevy You want it when??? Join Date: Aug 2003 Location: I live in memphis,tenn. been here for almost 30 years. Posts: 144	welcome to the board welcome, glad you came, I have a 84 scottsdale myself, if you need any parts let me know I got them from front bumper to back bumper in memphis __________________ RiverCityChevy The more Hondas I see the more I love my Chevy Truck. If you're not out front the view never changes.

08-24-2003, 12:05 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Welcome to the board!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-24-2003, 01:33 PM	#7
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Texas is a BIG state, better put your area in the profile. there are a LOT of helpful guys here from all areas of Texas & Ok. , especially DFW area. There may be someone near you that has what you need at home . welcome aboard -mostly calm seas here. Now you have already heard from 2 of the whopping 4 board members that are members from Jersey or NooJoisey if you are from where rustyc10 is from. . DAVE-resident ass clown __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.