Where can I get new wing vent handle gaskets? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rs74** · 02-14-2015, 10:48 AM

Took the short bed for its first drive yesterday and noticed the vent windows were leaking air pretty bad. The gasket between the handle and glass seems to be all wore and not able to put enough pressure when the latch is against the frame when closed. Also I haven't looked yet but is there a set screw on the handles to take them off ?

**rs74** · 02-14-2015, 03:25 PM

After looking a little closer it looks like they are just spring washers in there. So maybe I just need to see if I can tighten things up maybe.

**TKCR** · 02-14-2015, 03:25 PM

This place has a lot of stuff for the vent windows
http://www.classicparts.com/Misc-Gla...oducts/384/3/0

**rs74** · 02-14-2015, 04:11 PM

I am not even sure what all is supposed to be in there. Here is what I have now.

68Timber · 02-14-2015, 05:19 PM

I saved the instructions when I got a new set for the CUCV.

**rs74** · 02-23-2015, 04:59 PM

I found a dorman latch but only for the drivers side. I can't find the # for the passenger side. I am trying to order the majority of my parts from one place and can not find this number to see if they have it.

**TKCR** · 02-23-2015, 06:30 PM

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=19

**rs74** · 02-23-2015, 06:33 PM

Quote:

Originally Posted by TKCR

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=19

I will probably have to order a set from one of the links you posted. I am putting an order together from Rockauto and was just going to try and get them through there but they only list the left side.

**MikeB** · 02-23-2015, 09:00 PM

You might try a local parts store. I bought a rebuild kit for my 82 at Autozone.

burkeftm · 02-23-2015, 10:06 PM

gm part numbers should be 12300197 and 12300198 nos are on ebay now they are running about 30.00 each side
Bob

**rs74** · 03-03-2015, 11:48 AM

I ended up buying a passenger side replacement from Napa for $18. It came with an extra set of springs and gaskets in case I was working on a van. Apparently they are a little different thickness on the vans. I am going to use the extra parts to try to tighten up the drivers side. If that don't work then I will buy another new one.

The new latch helped bring the noise down but still have a little left. Probably needs a new window gasket but I am not sure I am going to mess with that right now. It is quieter in the cab now but that also allowed me to hear other places that are leaking air going down the road. Not sure if the rubber on the door jam or the top felt is leaking on the drivers door but it is right next to me.

02-14-2015, 10:48 AM	#1
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Where can I get new wing vent handle gaskets? Took the short bed for its first drive yesterday and noticed the vent windows were leaking air pretty bad. The gasket between the handle and glass seems to be all wore and not able to put enough pressure when the latch is against the frame when closed. Also I haven't looked yet but is there a set screw on the handles to take them off ? __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

02-14-2015, 03:25 PM	#2
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: Where can I get new wing vent handle gaskets? After looking a little closer it looks like they are just spring washers in there. So maybe I just need to see if I can tighten things up maybe. __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

02-14-2015, 03:25 PM	#3
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: Where can I get new wing vent handle gaskets? This place has a lot of stuff for the vent windows http://www.classicparts.com/Misc-Gla...oducts/384/3/0

02-14-2015, 04:11 PM	#4
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: Where can I get new wing vent handle gaskets? I am not even sure what all is supposed to be in there. Here is what I have now. Attached Images __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

02-14-2015, 05:19 PM	#5
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Where can I get new wing vent handle gaskets? I saved the instructions when I got a new set for the CUCV. Attached Images __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

02-23-2015, 04:59 PM	#6
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: Where can I get new wing vent handle gaskets? I found a dorman latch but only for the drivers side. I can't find the # for the passenger side. I am trying to order the majority of my parts from one place and can not find this number to see if they have it. __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

02-23-2015, 06:30 PM	#7
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: Where can I get new wing vent handle gaskets? http://www.lmctruck.com/icatalog/cc/full.aspx?Page=19

02-23-2015, 09:00 PM	#9
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Re: Where can I get new wing vent handle gaskets? You might try a local parts store. I bought a rebuild kit for my 82 at Autozone. __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

02-23-2015, 10:06 PM	#10
burkeftm Registered User Join Date: Apr 2010 Location: conshohocken,pa Posts: 37	Re: Where can I get new wing vent handle gaskets? gm part numbers should be 12300197 and 12300198 nos are on ebay now they are running about 30.00 each side Bob

03-03-2015, 11:48 AM	#11
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: Where can I get new wing vent handle gaskets? I ended up buying a passenger side replacement from Napa for $18. It came with an extra set of springs and gaskets in case I was working on a van. Apparently they are a little different thickness on the vans. I am going to use the extra parts to try to tighten up the drivers side. If that don't work then I will buy another new one. The new latch helped bring the noise down but still have a little left. Probably needs a new window gasket but I am not sure I am going to mess with that right now. It is quieter in the cab now but that also allowed me to hear other places that are leaking air going down the road. Not sure if the rubber on the door jam or the top felt is leaking on the drivers door but it is right next to me. __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.