Fender Emblems, Silverado 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TKCR** · 03-21-2015, 10:54 AM

Need help with the fender emblem placement. I picked up a very nice set of emblems off eBay. The studs are off, which is what I wanted. I didn't want to drill holes in the fender, so I put adhesive tape on the back. What I need from someone is some measurements for the correct mounting placement.

I looked at lots of photos, but it's hard to tell exactly where the emblem goes.

**TKCR** · 03-21-2015, 10:34 PM

No one?

y5mgisi · 03-21-2015, 10:40 PM

Someone should post up soon.

BLP86 · 03-21-2015, 10:54 PM

TKCR
I measured from the fender crease 1/4in. down for the top of the emblem placement and 3 and 1/4in. from the fender edge on my 86 C10. I took these measurements off of 86 C10 in the junkyard. The 1/4in down from the crease is the placement of the 10 (high point) of the emblem. Hope this helps.
Bruce

Jeramy · 03-22-2015, 12:07 AM

i got same measurements on my 81

**TKCR** · 03-22-2015, 02:14 AM

Thanks for the info guys. I'll put the emblems on according to these measurements

BLP86 · 03-23-2015, 01:06 PM

TKCR,
I forgot that I had a photo of my emblem, using the measurements I gave to you. Thought you might want to see how they turned out.
Bruce

**TKCR** · 03-23-2015, 01:33 PM

Looks nice. I didn't get around to putting mine on yet, can't wait to. Just waiting on a warm day, if that ever happens.

03-21-2015, 10:54 AM	#1
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Fender Emblems, Silverado 10 Need help with the fender emblem placement. I picked up a very nice set of emblems off eBay. The studs are off, which is what I wanted. I didn't want to drill holes in the fender, so I put adhesive tape on the back. What I need from someone is some measurements for the correct mounting placement. I looked at lots of photos, but it's hard to tell exactly where the emblem goes. Attached Images

03-21-2015, 10:34 PM	#2
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: Fender Emblems, Silverado 10 No one?

03-21-2015, 10:40 PM	#3
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: Fender Emblems, Silverado 10 Someone should post up soon. __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

03-21-2015, 10:54 PM	#4
BLP86 Registered User Join Date: Aug 2013 Location: Palos Park, IL Posts: 80	Re: Fender Emblems, Silverado 10 TKCR I measured from the fender crease 1/4in. down for the top of the emblem placement and 3 and 1/4in. from the fender edge on my 86 C10. I took these measurements off of 86 C10 in the junkyard. The 1/4in down from the crease is the placement of the 10 (high point) of the emblem. Hope this helps. Bruce

03-22-2015, 12:07 AM	#5
Jeramy Registered User Join Date: Dec 2014 Location: Mulberry, AR Posts: 222	Re: Fender Emblems, Silverado 10 i got same measurements on my 81 __________________ 1981 Silverado C10 LS/4l60e My truck may be loud and ugly but I love her like bacon

03-22-2015, 02:14 AM	#6
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: Fender Emblems, Silverado 10 Thanks for the info guys. I'll put the emblems on according to these measurements

03-23-2015, 01:06 PM	#7
BLP86 Registered User Join Date: Aug 2013 Location: Palos Park, IL Posts: 80	Re: Fender Emblems, Silverado 10 TKCR, I forgot that I had a photo of my emblem, using the measurements I gave to you. Thought you might want to see how they turned out. Bruce Attached Images

03-23-2015, 01:33 PM	#8
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: Fender Emblems, Silverado 10 Looks nice. I didn't get around to putting mine on yet, can't wait to. Just waiting on a warm day, if that ever happens.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.